TEPREL

Last updated
TEPREL-C
Country of origin Spain
Designer PLD Space
ManufacturerPLD Space
Application
PredecessorTEPREL-B
StatusTesting
Liquid-fuel engine
Propellant LOX / RP-1
Cycle Gas-generator [1]
Performance
Thrust, vacuum50  kN (11,000 lbf)
Thrust, sea-level190  kN (43,000 lbf) [2]
Used in
Miura 5
TEPREL-B
Country of origin Spain
Designer PLD Space
ManufacturerPLD Space
PredecessorTEPREL-A
StatusActive
Liquid-fuel engine
Propellant LOX / Jet-A1
Mixture ratio2.35
Cycle Pressure-fed engine
Performance
Thrust30.2  kN (6,800 lbf) kN
Chamber pressure 22 bar
Burn time240 seconds
Used in
Miura 1
First TEPREL-DEMO motor created by PLD Space Motor 1 PLD Space.JPG
First TEPREL-DEMO motor created by PLD Space

TEPREL is a family of rocket engines designed and built by the Spanish aerospace company PLD Space for their Miura 1 and Miura 5 launch vehicles. The TEPREL engine, named after the Spanish reusable engine program that is financing its development, uses kerosene and liquid oxygen as propellants. [3] So far, several versions of this engine, intended to propel Miura 1, have been developed and tested on the company's own liquid propulsion test facilities located in Teruel, Spain. [4]

Contents

Revisions

In the first versions of the engine the propellants are driven to the engine by using a pressure-fed cycle with helium. [5] Later versions of the engine (TEPREL-C) incorporate a turbopump. [6]

TEPREL-DEMO

The TEPREL-DEMO engine, originally called NetonVac1, was first tested in 2015. It is a calorimetric engine model, intended to demonstrate combustion stability as well as to acquire relevant information such as ignition and shut-down sequences, pressures and temperatures along the engine, thrust and propellant mass flow rates at different thrust profiles. Additionally, the engine served to test all associated hardware and software at PLD Space Propulsion Test Facilities. The engine is capable to produce a thrust of 28 kN at sea level. [7] [8]

TEPREL-A

With the TEPREL-A engine, first tested in 2017, the company included several design upgrades, such as a new combustion chamber design, [9] an improved injector geometry and a regenerative cooling system. The later enables the engine to fire for nearly 2 minutes, which is the envisaged nominal functioning duration for the suborbital launch vehicle Miura 1. At sea level, the engine produces a thrust of 32 kN. [8] [7]

TEPREL-B

TEPREL-B is the first flight version of the TEPREL engine. Several design improvements have been implemented to reduce the overall weight of the engine. It is equipped with a thrust vector control system [10] and a convergent-divergent nozzle, all regeneratively cooled. [11] In May 2019 the first unit of this model was destroyed during a test. After a long investigation PLD Space concluded that the problem was due to excess pressure during engine start at ignition. PLD Space addressed the issue through a combination of improvements to the launch site infrastructure and procedural improvements. [12] It is currently fully operational. In February 2020, PLD Space successfully completed a 122-second test that allowed it to achieve flight rating. [13]

On August 28, 2020, PLD Space completed required tests for the thrust vector control system on the Teprel-B rocket engine. [10]

TEPREL-C

Flight version of the TEPREL engine [14] to be used in the Miura 5 rocket. Initially it was expected to produce 105.5 kN [15] of thrust at sea level. [6] Later expected thrust was increased to 190 kN.

TEPREL-C vacuum

Version of TEPREL-C adapted to vacuum, and capable of re-ignition in microgravity conditions. [16] Capable of 45 kN of thrust.

Related Research Articles

<span class="mw-page-title-main">Hybrid-propellant rocket</span> Rocket engine that uses both liquid / gaseous and solid fuel

A hybrid-propellant rocket is a rocket with a rocket motor that uses rocket propellants in two different phases: one solid and the other either gas or liquid. The hybrid rocket concept can be traced back to the early 1930s.

<span class="mw-page-title-main">Rocket engine</span> Non-air breathing jet engine used to propel a missile or vehicle

A rocket engine uses stored rocket propellants as the reaction mass for forming a high-speed propulsive jet of fluid, usually high-temperature gas. Rocket engines are reaction engines, producing thrust by ejecting mass rearward, in accordance with Newton's third law. Most rocket engines use the combustion of reactive chemicals to supply the necessary energy, but non-combusting forms such as cold gas thrusters and nuclear thermal rockets also exist. Vehicles propelled by rocket engines are commonly used by ballistic missiles and rockets. Rocket vehicles carry their own oxidiser, unlike most combustion engines, so rocket engines can be used in a vacuum to propel spacecraft and ballistic missiles.

<span class="mw-page-title-main">Liquid-propellant rocket</span> Rocket engine that uses liquid fuels and oxidizers

A liquid-propellant rocket or liquid rocket utilizes a rocket engine burning liquid propellants. (Alternate approaches use gaseous or solid propellants.) Liquids are desirable propellants because they have reasonably high density and their combustion products have high specific impulse (Isp). This allows the volume of the propellant tanks to be relatively low.

<span class="mw-page-title-main">RS-25</span> Space Shuttle and SLS main engine

The Aerojet Rocketdyne RS-25, also known as the Space Shuttle Main Engine (SSME), is a liquid-fuel cryogenic rocket engine that was used on NASA's Space Shuttle and is used on the Space Launch System (SLS).

<span class="mw-page-title-main">Rocketdyne J-2</span> Rocket engine

The J-2, commonly known as Rocketdyne J-2, was a liquid-fuel cryogenic rocket engine used on NASA's Saturn IB and Saturn V launch vehicles. Built in the United States by Rocketdyne, the J-2 burned cryogenic liquid hydrogen (LH2) and liquid oxygen (LOX) propellants, with each engine producing 1,033.1 kN (232,250 lbf) of thrust in vacuum. The engine's preliminary design dates back to recommendations of the 1959 Silverstein Committee. Rocketdyne won approval to develop the J-2 in June 1960 and the first flight, AS-201, occurred on 26 February 1966. The J-2 underwent several minor upgrades over its operational history to improve the engine's performance, with two major upgrade programs, the de Laval nozzle-type J-2S and aerospike-type J-2T, which were cancelled after the conclusion of the Apollo program.

<span class="mw-page-title-main">El Arenosillo</span>

El Arenosillo Test Centre (CEDEA) is the name of a rocket launch site for suborbital rockets managed by INTA, located in Moguer (Spain). It is located in the province of Huelva, Andalucía, in the southwest coast of Spain (37.1° N, 6.7° W). CEDEA is adjacent to the Center of Excellence for Unmanned Systems (CEUS).

<span class="mw-page-title-main">CE-7.5</span> Cryogenic rocket engine developed by the Indian Space Research Organisation

The CE-7.5 is a cryogenic rocket engine developed by the Indian Space Research Organisation to power the upper stage of its GSLV Mk-2 launch vehicle. The engine was developed as a part of the Cryogenic Upper Stage Project (CUSP). It replaced the KVD-1 (RD-56) Russian cryogenic engine that powered the upper stage of GSLV Mk-1.

Fastrac was a turbo pump-fed, liquid rocket engine. The engine was designed by NASA as part of the low cost X-34 Reusable Launch Vehicle (RLV) and as part of the Low Cost Booster Technology project. This engine was later known as the MC-1 engine when it was merged into the X-34 project.

<span class="mw-page-title-main">Rocket propellant</span> Chemical or mixture used as fuel for a rocket engine

Rocket propellant is the reaction mass of a rocket. This reaction mass is ejected at the highest achievable velocity from a rocket engine to produce thrust. The energy required can either come from the propellants themselves, as with a chemical rocket, or from an external source, as with ion engines.

<span class="mw-page-title-main">Nuri (rocket)</span> First South Korean orbital launch vehicle developed domestically

Nuri, also known as KSLV-II, is a three-stage launch vehicle, the second one developed by South Korea and the successor to Naro-1 (KSLV-1). Nuri is developed by Korea Aerospace Research Institute (KARI). All three stages use indigenously developed launch vehicle engines, making Nuri the first indigenously developed South Korean orbital launch vehicle.

Tronador is a series of Argentine rockets, including the Tronador I and Tronador II vehicles, to develop a liquid-propellant rocket expendable launch system called ISCUL.

<span class="mw-page-title-main">SuperDraco</span> Family of rocket engines developed by SpaceX for use on its Crewed Dragon spacecraft

SuperDraco is a hypergolic propellant rocket engine designed and built by SpaceX. It is part of the SpaceX Draco family of rocket engines. A redundant array of eight SuperDraco engines provides fault-tolerant propulsion for use as a launch escape system for the SpaceX Dragon 2, a passenger-carrying space capsule.

<span class="mw-page-title-main">BE-4</span> Large staged combustion rocket engine by Blue Origin

The Blue Engine 4 (BE-4) is an oxygen-rich liquefied-methane-fueled staged-combustion rocket engine produced by Blue Origin. The BE-4 was developed with private and public funding. The engine has been designed to produce 2.4 meganewtons (550,000 lbf) of thrust at sea level.

<span class="mw-page-title-main">Zero 2 Infinity</span> Private Spanish company developing high-altitude balloons

Zero 2 Infinity is a private Spanish company developing high-altitude balloons intended to provide access to near space and low Earth orbit using a balloon-borne pod and a balloon-borne launcher.

<span class="mw-page-title-main">PLD Space</span> Private Spanish launch services provider

Payload Aerospace S.L. is a Spanish company developing two partially-reusable launch vehicles called Miura 1 and Miura 5.

<span class="mw-page-title-main">Rutherford (rocket engine)</span> Liquid-fueled rocket engine

Rutherford is a liquid-propellant rocket engine designed by aerospace company Rocket Lab and manufactured in Long Beach, California. The engine is used on the company's own rocket, Electron. It uses LOX and RP-1 as its propellants and is the first flight-ready engine to use the electric-pump feed cycle. The rocket uses a similar engine arrangement to the Falcon 9; a two-stage rocket using a cluster of nine identical engines on the first stage, and one vacuum-optimized version with a longer nozzle on the second stage. This arrangement is also known as an octaweb. The sea-level version produces 24.9 kN (5,600 lbf) of thrust and has a specific impulse of 311 s (3.05 km/s), while the vacuum optimized-version produces 25.8 kN (5,800 lbf) of thrust and has a specific impulse of 343 s (3.36 km/s).

<span class="mw-page-title-main">Miura 1</span> Suborbital recoverable launch vehicle of the Spanish company PLD Space

Miura 1 is a suborbital recoverable launch vehicle developed by the Spanish company PLD Space. It is planned to be the first recoverable launch vehicle in Europe. It was first launched successfully on October 7, 2023, at 00:19 UTC.

<span class="mw-page-title-main">Miura 5</span> European orbital recoverable rocket of the company PLD Space

Miura 5 is a two-stage European orbital recoverable launch vehicle currently under development by the Spanish company PLD Space. In a standard two-stage configuration, it will have a length of 34 m, be capable of inserting 1000 kg of payload into a low Earth orbit (LEO), featuring an optional kick stage that can circularize the orbits of satellites.

<span class="mw-page-title-main">SpaceX Raptor</span> SpaceX family of liquid-fuel rocket engines

Raptor is a family of rocket engines developed and manufactured by SpaceX. The engine is a full-flow staged combustion cycle (FFSC) engine powered by cryogenic liquid methane and liquid oxygen ("methalox").

The Vikram is a family of small-lift launch vehicles being developed by Skyroot Aerospace, an Indian startup aerospace company.

References

  1. @RaulTorresPLD (January 18, 2022). "@Astro_Danyboy @isaraerospace @rfa_space @PLD_Space Thread 👉 Happy to give you accurate #MIURA5 figures: maximum pa…" (Tweet) via Twitter.
  2. @RaulTorresPLD (September 1, 2022). "MIURA5 first stage engines" (Tweet) via Twitter.
  3. "The Spanish Government supports PLD Space launchers development with a $1.56M TEPREL program". pldspace.com. 27 April 2016. Archived from the original on 28 May 2018. Retrieved 27 May 2018.
  4. Foust, Jeff (September 16, 2022). "PLD Space completes static-fire tests of Miura 1". Space News . Retrieved November 28, 2022.
  5. "MIURA 1 – Payload User's guide" (PDF). pldspace.com. November 2018. Retrieved November 28, 2022.
  6. 1 2 "PLDSpace" (PDF). ESA Microlaunch Services Workshop. November 6, 2018. Retrieved November 28, 2022.
  7. 1 2 "PLD Space ready to test its new engine". pldspace.com. 10 Jul 2017. Archived from the original on 18 June 2018. Retrieved 27 May 2018.
  8. 1 2 Marín, Daniel (16 Feb 2018). "Europa apuesta por PLD Space para alcanzar el espacio" . Retrieved 27 May 2018.
  9. PLD Space [@PLD_Space] (July 5, 2017). "Hoy tenemos el honor de presentar la nueva cámara de combustión de TEPREL-A,nuevo motor cohete regenerativo de @PLD_Space #GoPLD #GoARION1 https://t.co/SSi7uJJVRN" (Tweet) (in Spanish). Retrieved 31 December 2020 via Twitter.
  10. 1 2 "PLD Space completes critical testing of its Teprel-B rocket engine". 31 August 2020.
  11. Raúl Torres🇪🇸 [@RaulTorresPLD] (September 2, 2020). "@CarCamMar @PLD_Space Yes, to all. #TEPREL-B has convergent-Divergent nozzle, all regeneratively cooled, providing 32.3kN (SL) at full thrust and designed to work more than 1000s accumulated" (Tweet). Retrieved 31 December 2020 via Twitter.
  12. "PLD Space books first suborbital flight, nears resolution of engine setback". 5 February 2020.
  13. "Éxito en el ensayo del motor cohete para el lanzador reutilizable de PLD Space". defensa.com. February 27, 2020. Retrieved November 28, 2022.
  14. "PLD Space más cerca del espacio". 9 January 2017.
  15. "La guía definitiva del cohete Miura 1 de PLD Space". 26 November 2021.
  16. Raúl Torres🇪🇸 [@RaulTorresPLD] (August 3, 2020). "@Eurekablog @PLD_Space Arriba a la derecha, en otro palé se ve la cuaderna que hay entre el tanque de oxígeno y la interetapa de MIURA5, también sometida a ensayo destructivo. Al fondo de la imagen, se aprecia uno de los laterales del "erector" de MIURA 1, en el foso de ensamblaje" (Tweet) (in Spanish). Retrieved 31 December 2020 via Twitter.