USS Dyer

Last updated

USS Dyer (DD-84) in port, circa 1920 (NH 84172).jpg
History
US flag 48 stars.svgUnited States
Namesake Nehemiah Mayo Dyer
Builder Fore River Shipyard, Quincy, Massachusetts
Laid down26 September 1917
Launched13 April 1918
Commissioned1 July 1918
Decommissioned7 June 1922
Stricken7 January 1936
FateSold, 8 September 1936
General characteristics
Class and type Wickes-class destroyer
Displacement
  • 1,202–1,208 long tons (1,221–1,227 t) (standard)
  • 1,295–1,322 long tons (1,316–1,343 t) (deep load)
Length314 ft 4 in (95.8 m)
Beam30 ft 11 in (9.42 m)
Draught9 ft 10 in (3.0 m)
Installed power
Propulsion2 shafts, 2 steam turbines
Speed35 knots (65 km/h; 40 mph) (design)
Range2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph) (design)
Complement6 officers, 108 enlisted men
Armament

USS Dyer (DD-84) was a Wickes-class destroyer built for the United States Navy during World War I.

Contents

Description

The Wickes class was an improved and faster version of the preceding Caldwell-class. Two different designs were prepared to the same specification that mainly differed in the turbines and boilers used. The ships built to the Bethlehem Steel design, built in the Fore River and Union Iron Works shipyards, mostly used Yarrow boilers that deteriorated badly during service and were mostly scrapped during the 1930s. [1] The ships displaced 1,202–1,208 long tons (1,221–1,227 t) at standard load and 1,295–1,322 long tons (1,316–1,343 t) at deep load. They had an overall length of 314 feet 4 inches (95.8 m), a beam of 30 feet 11 inches (9.4 m) and a draught of 9 feet 10 inches (3.0 m). They had a crew of 6 officers and 108 enlisted men. [2]

Performance differed radically between the ships of the class, often due to poor workmanship. The Wickes class was powered by two steam turbines, each driving one propeller shaft, using steam provided by four water-tube boilers. The turbines were designed to produce a total of 27,000 shaft horsepower (20,000 kW) intended to reach a speed of 35 knots (65 km/h; 40 mph). The ships carried 225 long tons (229 t) of fuel oil which was intended gave them a range of 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph). [3]

The ships were armed with four 4-inch (102 mm) guns in single mounts and were fitted with two 1-pounder guns for anti-aircraft defense. Their primary weapon, though, was their torpedo battery of a dozen 21 inch (533 mm) torpedo tubes in four triple mounts. In many ships a shortage of 1-pounders caused them to be replaced by 3-inch (76 mm) anti-aircraft (AA) guns. [1] They also carried a pair of depth charge rails. A "Y-gun" depth charge thrower was added to many ships. [4]

Construction and career

Dyer, named for Nehemiah Mayo Dyer was launched 13 April 1918 by the Fore River Shipbuilding Company, Quincy, Massachusetts, sponsored by Miss Virginia Blackmur, and commissioned 1 July 1918. Assigned to U.S. patrol squadrons based on Gibraltar, Dyer sailed from New York 9 July 1918 with Assistant Secretary of the Navy Franklin Delano Roosevelt embarked for transportation to Plymouth, England. Arriving 21 July Dyer got underway 5 days later arriving Gibraltar on the 29th. On 4 August she began her service as escort for merchant convoys and Army transports between Gibraltar and Marseilles, France, making nine such voyages until the end of hostilities.

USSDyerDD84.jpg

Dyer departed Gibraltar 29 January 1919 for service with U.S. Naval Forces in the central and eastern Mediterranean, and called at Split and Kotor, Dalmatia (today in Croatia and in Montenegro), and Brindisi, Italy, Constantinople, Turkey, and Beirut, Lebanon, before arriving at Venice 5 February. Operating from Venice as flagship for the force, Dyer took part in relief activities in the Balkans and Middle East, carried passengers and supplies in the Adriatic and aided in the execution of the terms of the Austrian Armistice until 16 April, when she sailed for the United States. Dyer arrived at New York 14 June 1919 with two Members of Congress embarked.

Between 1 October 1919 and 31 October 1920, Dyer was in reserve, in reduced commission. She operated out of Charleston, South Carolina, until 3 April 1922 when she sailed to Philadelphia Navy Yard. Dyer was decommissioned there 7 June 1922 and sold 8 September 1936.

As of 2019, no other ships in the United States Navy have carried this name.

Notes

  1. 1 2 Gardiner & Gray, p. 124
  2. Friedman, pp. 401–03
  3. Friedman, pp. 39–42, 401–03
  4. Friedman, p. 45

Related Research Articles

USS <i>Murray</i> (DD-97) Wickes-class destroyer

USS Murray (DD-97) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Kimberly</i> (DD-80) Wickes-class destroyer

USS Kimberly (DD-80) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>McKee</i> (DD-87) Wickes-class destroyer

USS McKee (DD-87) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Bell</i> (DD-95) Wickes-class destroyer

USS Bell (DD-95) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Mugford</i> (DD-105) Wickes-class destroyer

USS Mugford (DD-105) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Hazelwood</i> (DD-107) Wickes-class destroyer

USS Hazelwood (DD-107) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Champlin</i> (DD-104) Wickes-class destroyer

USS Champlin (DD-104) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Hart</i> (DD-110) Wickes-class destroyer

USS Hart (DD-110) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Ingraham</i> (DD-111) Wickes-class destroyer

USS Ingraham (DD-111) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Ludlow</i> (DD-112) Wickes-class destroyer

USS Ludlow (DD-112) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>DeLong</i> (DD-129) Wickes-class destroyer

USS DeLong (DD-129) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Meredith</i> (DD-165) Wickes-class destroyer

USS Meredith (DD-165) was a Wickes-class destroyer built for the United States Navy during World War I. She was the first destroyer in the United States Navy that named for a marine.

USS <i>Bush</i> (DD-166) Wickes-class destroyer

USS Bush (DD-166) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Burns</i> (DD-171) Wickes-class destroyer

USS Burns (DD-171) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Anthony</i> (DD-172) Wickes-class destroyer

USS Anthony (DD-172) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Sproston</i> (DD-173) Wickes-class destroyer of the United States Navy

USS Sproston (DD-173) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>OBannon</i> (DD-177) Wickes-class destroyer

USS O'Bannon (DD-177) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>McDermut</i> (DD-262) Clemson-class destroyer

USS McDermut (DD-262) was a Clemson-class destroyer in service with the United States Navy from 1919 to 1929. She was scrapped in 1932.

USS <i>Morris</i> (DD-271) Clemson-class destroyer

USS Morris (DD-271) was a Clemson-class destroyer built for the United States Navy during World War I.

USS <i>McCawley</i> (DD-276) Clemson-class destroyer

USS McCawley (DD-276) was a Clemson-class destroyer built for the United States Navy during World War I. She was armed with 4 × 4 inch and 2 × 1 pounder guns. She was commissioned on 22 September 1919, served with the Pacific Fleet for 3 years and was laid up on 7 June 1922. McCawley was recommissioned on 27 September 1923, again serving in the Pacific, and decommissioned in 1930 before being sold for scrap.

References