.22 ILARCO

Last updated
.22 Winchester Short Magnum
22WMRS.jpg
.22 WMR (left) compared to .22 ILARCO (right)
TypeRifle
Place of origin United States
Production history
Designed1987 [1]
Manufacturer Winchester
Specifications
Parent case .22 WMR
Case typeRimmed, straight
Bullet diameter.224 in (5.7 mm)
Neck diameter.242 in (6.1 mm)
Base diameter.242 in (6.1 mm)
Rim diameter.294 in (7.5 mm)
Rim thickness.050 in (1.3 mm)
Case length.669 in (17.0 mm)
Overall length.950 in (24.1 mm)
Primer typeRimfire
Ballistic performance
Bullet mass/typeVelocityEnergy
40 gr (3 g) FMJ1,350 ft/s (410 m/s)160 ft⋅lbf (220 J)

The .22 ILARCO, also known as the .22 Winchester Short Magnum Rimfire or .22 American, [2] [3] was a rimfire cartridge designed in 1987 for the American-180 rimfire submachine gun. At the time the cartridge was created, the design of the American-180 had been taken over by the Illinois Arms Company, Inc., hence the ILARCO name.

Contents

History

Sometime after the Illinois Arms Company, Inc. (ILARCO) purchased the rights to the American-180 they determined a more powerful cartridge would be appropriate, which resulted in the creation of the .22 ILARCO. The new cartridge was designed so that a simple change of barrel was all that was required to switch between standard .22 Long Rifle, for which the gun was designed, and the new cartridge.

Dimensions and loading

The .22 ILARCO uses a shorter version of the .22 Winchester Magnum Rimfire case, which use the same 40 grain projectile as the original .22 Winchester Magnum Rimfire cartridge.

See also

Related Research Articles

<span class="mw-page-title-main">Cartridge (firearms)</span> Pre-assembled firearm ammunition consisting of a casing, projectile, propellant, and primer

A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.

<span class="mw-page-title-main">Table of handgun and rifle cartridges</span> Small arms cartridge data

This is a table of selected pistol/submachine gun and rifle/machine gun cartridges by common name. Data values are the highest found for the cartridge, and might not occur in the same load.

Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".

<span class="mw-page-title-main">Rimfire ammunition</span> Type of ammunition that is only commonly found in small-caliber firearms

A rimfire cartridge is a type of firearm metallic cartridge whose primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845, by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the early to mid-19th century onwards, such as pinfire, only small caliber rimfire and centerfire cartridges have survived to the present day with regular usage. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition in the world today in terms of units manufactured and sold.

Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada and China, PRC. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.

<span class="mw-page-title-main">.410 bore</span> Shotgun bore designed by Charles Eley and William Eley

The .410 bore (10.4 mm) is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore (9 mm) rimfire, No. 2 bore (7 mm) rimfire, and No. 1 bore (6 mm) rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.

<span class="mw-page-title-main">.22 Winchester Magnum Rimfire</span> Rimfire cartridge

The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).

<span class="mw-page-title-main">Wildcat cartridge</span> Custom cartridge for firearms

A wildcat cartridge, often shortened to wildcat, is a custom cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created in order to optimize a certain performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.

The Winchester Repeating Arms Company was a prominent American manufacturer of repeating firearms and ammunition. The firm was established in 1866 by Oliver Winchester and was located in New Haven, Connecticut. The firm went into receivership in 1931 and was bought by the Western Cartridge Company, a forerunner of the Olin Corporation. The Winchester brand name is still owned by the Olin Corporation, which makes ammunition under that name. The Winchester name is also used under license for firearms produced by two subsidiaries of the Herstal Group – FN Herstal of Belgium and the Browning Arms Company of Ogden, Utah.

Marlin Firearms Co. is an American manufacturer of semi-automatic, lever-action, and bolt-action rifles. In the past, the company, now based in Madison, North Carolina, and formerly based in North Haven, Connecticut, made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

Thompson/Center Arms was an American firearms company based in Springfield, Massachusetts. The company was best known for its line of interchangeable-barrel, single-shot pistols and rifles. Thompson/Center also manufactured muzzle-loading rifles and was credited with creating the resurgence of their use in the 1970s.

<span class="mw-page-title-main">H&R Firearms</span> Firearms brand

H&R 1871, LLC, or more commonly known as Harrington & Richardson, is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

The American-180 is a submachine gun developed in the 1960s which fires the .22 Long Rifle or .22 ILARCO cartridges from a pan magazine. The concept began with the Casull Model 290 that used a flat pan magazine similar to designs widely used prior to World War II. Only 87 Casull M290s were built, as the weapon was expensive manufacture. The American-180 is an improved version. A semi-automatic only variant called the American SAR 180/275 is still produced on a custom basis by E&L Manufacturing of Riddle, Oregon.

<span class="mw-page-title-main">Thompson/Center Contender</span> Break-action

The Thompson/Center Contender is a break-action single-shot pistol or rifle that was introduced in 1967 by Thompson/Center Arms. It can be chambered in cartridges from .17 Bumble Bee to .45-70 Government.

<span class="mw-page-title-main">North American Arms</span>

North American Arms is a United States company, headquartered in Provo, Utah, that manufactures pocket pistols and mini-revolvers, also called mouse guns. The company was originally named Rocky Mountain Arms when it was founded in 1972. In 1974 it was bought by new owners who renamed the company North American Manufacturing (NAM) and then North American Arms (NAA).

<span class="mw-page-title-main">.22 caliber</span> Index of articles associated with the same name

.22 caliber, or 5.6 mm caliber, refers to a common firearms bore diameter of 0.22 inch (5.6 mm) in both rimfire and centerfire cartridges.

<span class="mw-page-title-main">5mm Remington Rimfire Magnum</span> Bottlenecked rimfire cartridge introduced by Remington Arms Company

The 5 mm Remington Rimfire Magnum or 5 mm RFM is a bottlenecked rimfire cartridge introduced by Remington Arms Company in 1969. Remington chambered it in a pair of bolt-action rifles, the Model 591 and Model 592, but this ammunition never became very popular, and the rifles were discontinued in 1974. About 52,000 rifles and 30,000 barrels for the T/C Contender pistol were sold during its brief production run. Remington discontinued the cartridge itself in 1982, leaving owners with no source of ammunition.

The Marlin Levermatic was a family of lever-action rifles created by Marlin Firearms in the 1955. The Levermatic differed from the traditional lever-action rifles, such as the Marlin 39A, in that it employed a cam-and-roller system giving it an extremely smooth and short lever motion to reload a new cartridge.

<span class="mw-page-title-main">Freedom Arms</span>

Freedom Arms is a Freedom, Wyoming based firearm manufacturing company, known for producing powerful single-action revolvers. The company was founded in 1978 by Wayne Baker and Dick Casull to produce the Mini-Revolver, then later a revolver chambered in Casull's powerful .454 Casull revolver cartridge. This 5-shot revolver was the Model 83. Freedom Arms currently makes a single-shot pistol in addition to their revolvers.

<span class="mw-page-title-main">.17 Winchester Super Magnum</span> American rimfire rifle cartridge

.17 Winchester Super Magnum, is a rimfire rifle cartridge developed by the ammunition company Winchester in 2012. It descended from a .27 caliber nail-gun blank cartridge by necking down the blank case to take a .17 caliber (4.5mm) bullet. Initial loadings were with a 20 grains (1.3 g) bullet, delivering muzzle velocities around 3,000-foot-per-second (910 m/s).

References

  1. "Rimfire Small Arms Rounds" . Retrieved 26 July 2020.
  2. "THE CARTRIDGE COLLECTOR". Archived from the original on 6 February 2018. Retrieved 26 July 2020.
  3. Barnes, F. C., & Woodard, W. Todd. (2016). Cartridges of the world, 15th edition: A complete and illustrated reference for more than 1500 Cartridges. Gun Digest.