Winchester Repeating Arms Company

Last updated
Winchester Repeating Arms Company
Company type Private
Industry Arms industry
PredecessorNew Haven Arms Company
Founded1866;158 years ago (1866)
Founder Oliver Winchester
Defunct1931 (1931) (receivership)
FateBought by Western Cartridge Company (which later became part of the Olin Corporation)
SuccessorWinchester-Western Company
Headquarters,
U.S.
Products Firearms, ammunition and accessories
Website winchesterguns.com (arms)
winchester.com (ammunition)

The Winchester Repeating Arms Company was a prominent American manufacturer of repeating firearms and ammunition. The firm was established in 1866 by Oliver Winchester and was located in New Haven, Connecticut. The firm went into receivership in 1931 and was bought by the Western Cartridge Company, a forerunner of the Olin Corporation. The Winchester brand name is still owned by the Olin Corporation, which makes ammunition under that name. The Winchester name is also used under license for firearms produced by two subsidiaries of the Herstal GroupFN Herstal of Belgium and the Browning Arms Company of Ogden, Utah.

Contents

History

Early history

Predecessors

The ancestor of the Winchester Repeating Arms Company was the Horace Smith and Daniel Wesson partnership of Norwich, Connecticut (not to be confused with the famous Smith & Wesson Revolver Company founded later by the same men). Smith and Wesson acquired Lewis Jennings' improved version of inventor Walter Hunt's 1848 "Volition Repeating Rifle" and its caseless "Rocket Ball" ammunition, which had been produced in small numbers by Robbins & Lawrence of Windsor, Vermont. Jennings' rifle was a commercial failure, and Robbins & Lawrence ceased production in 1852. [1] Smith designed a much-improved rifle based on Jennings' design, and the partners also hired away Robbins & Lawrence shop foreman Benjamin Tyler Henry.

Oliver Winchester Oliver Winchester.jpg
Oliver Winchester

In 1855, the Smith and Wesson partnership, in order to manufacture what they called the "Volcanic" lever-action rifle and pistol, sought investors and incorporated as the Volcanic Repeating Arms Company. Its largest stockholder was clothing manufacturer Oliver Winchester. [1] The Volcanic rifle had only limited success. The company moved to New Haven (without Smith or Wesson) in 1856, but by the end of that year, it became insolvent. Oliver Winchester and his partner John M. Davies purchased the bankrupt firm's assets from the remaining stockholders and reorganized it as the New Haven Arms Company in April 1857. [1]

After Smith's departure, Benjamin Henry continued to work with a Smith development project, the self-contained metallic rimfire cartridge, and perfected the much larger, more powerful .44 Henry round. Henry also supervised a new rifle design based loosely on the Volcanic to use the new ammunition, retaining only the general form of the breech mechanism and the tubular magazine. This became the Henry rifle of 1860, which was manufactured by the New Haven Arms Company and used in considerable numbers by certain Union army units during the American Civil War. The Henry rifle ensured New Haven Arms' success, and together with the Spencer rifle, established the lever-action repeater in the firearms market.[ citation needed ]

The Winchester rifle

The Winchester arms factory in New Haven, Connecticut, 1891 US-CT(1891) p136 NEW HAVEN, WINCHESTER REPEATING ARMS COMPANY.jpg
The Winchester arms factory in New Haven, Connecticut, 1891
Magazine advertisement from 1898 Winchester Repeating Arms Company advertisement, 1898.jpg
Magazine advertisement from 1898

In 1866, Benjamin Henry, angered over what he believed was inadequate compensation, attempted to have the Connecticut legislature award ownership of New Haven Arms to him. Oliver Winchester, hastening back from Europe, forestalled the move and reorganized New Haven Arms yet again as the Winchester Repeating Arms Company. [2] Winchester had the basic design of the Henry rifle completely modified and improved to become the first Winchester rifle, the Model 1866, which fired the same .44 caliber rimfire cartridges as the Henry but had an improved magazine (with the addition of a loading gate on the right side of the receiver, invented by Winchester employee Nelson King) and, for the first time, a wooden forend. The Henry and the 1866 Winchester shared a unique double firing pin that struck the head of the rimfire cartridge in two places when the weapon was fired, increasing the chances that the fulminate in the hollow rim would ignite the 28 or so grains of black powder inside the case.[ citation needed ]

Another extremely popular model was rolled out in 1873. The Model 1873 introduced the first Winchester center fire cartridge, the .44-40 WCF (Winchester Center Fire). These rifle families are commonly known as the "Gun That Won the West."[ citation needed ]

The Model 1873 was followed by the Model 1876 (or "Centennial Model"), a larger version of the '73, which used the same toggle-link action and brass cartridge elevator used in the Henry. It was chambered for longer, more powerful cartridges such as .45-60 WCF, .45-75 WCF, and .50-95 WCF. The action was not long enough to allow Winchester to achieve their goal of producing a repeating rifle capable of handling the .45-70 Government cartridge; this would not happen until they began manufacture of the Browning-designed Model 1886.[ citation needed ]

Oliver Winchester died in December 1880; his son and successor, William Wirt Winchester, died of tuberculosis four months later. William Wirt Winchester's widow, Sarah Winchester, used her inheritance and income from the company to build what is now known as the Winchester Mystery House.

From 1883, John Browning worked in partnership with the Winchester Repeating Arms Company and designed a series of rifles and shotguns, most notably the Winchester Model 1885 Single Shot, Winchester Model 1887 lever-action shotgun, Model 1897 pump-action shotgun; and the lever-action Model 1886, Model 1892, Model 1894 and Model 1895 rifles. Several of these are still in production today through companies such as Browning, Rossi, Navy Arms, and others which have revived several of the discontinued models or produced reproductions.[ citation needed ]

20th-century developments

The turn of the twentieth century

Winchester Rifles ad, 1900 Winchester Repeating Arms Co. ad 1900.jpg
Winchester Rifles ad, 1900

The early years of the twentieth century found the Winchester Repeating Arms Company competing with new John Browning designs, manufactured under license by other firearm companies. The race to produce the first commercial self-loading rifle brought forth the .22 rimfire Winchester Model 1903 and later centerfire Model 1905, Model 1907, and Model 1910 rifles. Winchester engineers, after ten years of work, designed the Model 1911 to circumvent Browning's self-loading shotgun patents, prepared by the company's very own patent lawyers. One of Winchester's premier engineers, T.C. Johnson, was instrumental in the development of these self-loading firearms and went on to superintend the designs of Winchester's classic Model 1912, Model 52 and Model 54.[ citation needed ]

The First World War

The company was a major producer of the .303 Pattern 1914 Enfield rifle for the British Government and the similar .30-06 M1917 Enfield rifle for the United States during World War I. Working at the Winchester plant during the war, Browning developed the final design of the Browning Automatic Rifle (BAR), of which it produced some 27,000. Browning and the Winchester engineers also developed the Browning .50 caliber machine gun during the war. The caliber .50 BMG (12.7 x 99 mm) ammunition for it was designed by the Winchester ballistic engineers. The commercial rights to these new Browning guns were owned by Colt.[ citation needed ]

Failure and recovery

Share of the Winchester Repeating Arms Company, issued 4. March 1929 Winchester Repeating Arms Company 1929.JPG
Share of the Winchester Repeating Arms Company, issued 4. March 1929

During the war, Winchester had borrowed heavily to finance its massive expansion. With the return of peace, the company attempted to use its surplus production capacity and pay down its debt by trying to become a general manufacturer of consumer goods – everything from kitchen knives to roller skates to refrigerators, to be marketed through 'Winchester Stores'. They also merged with the Simmons Hardware Company. The Winchester and Keen Kutter brands did business together during the 1920s, but in 1929, they agreed to separate and returned to their core businesses. [3]

The consumer goods strategy was a failure for Winchester, and the Great Depression put the final nail in the company's coffin. The Winchester Repeating Arms Company went into receivership in 1931 and was bought at a bankruptcy auction by the Olin family's Western Cartridge Company on December 22 of that year. Oliver Winchester's firm would maintain a nominal existence until 1935 when Western Cartridge merged with its subsidiary to form the Winchester-Western Company. In 1944, the firearms and ammunition operations would be reorganized as the Winchester-Western Division of Olin Industries.[ citation needed ]

Western's First Vice-President (John M. Olin) was a sportsman and gun enthusiast, and he started at once to restore the Winchester brand to its former luster by concentrating on its classic models and updated versions thereof, with particular attention to quality and prestige. Olin personally pushed the deluxe Model 52 Sporter and the semi-custom Model 21 double-barreled shotgun. Winchester flourished, even during the later Depression.[ citation needed ]

The Second World War

"Winchester Creed for 1943" (propaganda poster from the archives of the War Production Board) Winchester Creed for 1943 - NARA - 534571.tif
"Winchester Creed for 1943" (propaganda poster from the archives of the War Production Board)
British members of the Auxiliary Territorial Service move Winchester firearms during World War II Women of the Auxiliary Territorial Service unload rifles.jpg
British members of the Auxiliary Territorial Service move Winchester firearms during World War II

The U.S. M1 carbine (technically not a carbine in the sense of a short version of a parent rifle) was designed at Winchester by an eight-man team including Edwin Pugsley, Bill Roemer, Marsh Williams, Fred Humiston, Cliff Warner, and Ralph Clarkson, although the popular press played up the role of ex-convict Williams. More M1 carbines were manufactured by Winchester and other firms than any other U.S. small arm of World War II. [4]

During World War II, Winchester produced the M1 Garand rifle and post-war was the first civilian manufacturer of the M14 rifle. [5]

Decline

By the 1960s, the rising cost of skilled labor was making it increasingly unprofitable to produce Winchester's classic designs, as they required considerable hand-work to finish. In particular, Winchester's flagship Model 12 pump shotgun and Model 70 bolt-action rifle with their machined forgings could no longer compete in price with Remington's cast-and-stamped 870 and 700. Accordingly, S. K. Janson formed a new Winchester design group to advance the use of "modern" engineering design methods and manufacturing principles in gun design. The result was a new line of guns that replaced most of the older products in 1963–1964. The immediate reaction of the shooting press and public was overwhelmingly negative: the popular verdict was that Winchester had sacrificed quality to the "cheapness experts," [6] and Winchester was no longer considered to be a prestige brand, causing a marked loss of market share. To this day, gun collectors consider "post-64" Winchesters to be both less desirable and less valuable than their predecessors.

In the early 1970s, the Olin Winchester-Western Division tried to diversify with at least two unsuccessful attempts. The first was an experimental indoor shooting range called Wingo in San Diego, California. This short-lived attempt had a strong tie to firearms and ammunition with exclusive guns, ammo, and target launching machines being produced. The flaw was to see it quickly profitable in a western city with too many competing outdoor activities. The second venture was trying to compete with Coleman Company in the camping and sporting goods market. "Trailblazer by Winchester" products included propane-fueled stoves and lanterns. They also produced tents and sleeping bags. These products struggled to compete with similar offerings from an established company founded in 1900.[ citation needed ]

Labor costs continued to rise through the 1960s and '70s, and a prolonged and bitter strike in 1979–1980 ultimately convinced Olin that firearms could no longer be produced profitably in New Haven. In December 1980, the New Haven plant was sold to its employees, incorporated as the U.S. Repeating Arms Company, and granted a license to make Winchester arms. Olin retained the Winchester ammunition business. U.S. Repeating Arms itself went bankrupt in 1989. After bankruptcy, it was acquired by a French holding company, then sold to Belgian arms makers Herstal Group, which also owns gun makers FN Herstal and Browning Arms Company. [7]

On January 16, 2006, U.S. Repeating Arms announced it was closing its New Haven plant where Winchester rifles and shotguns had been produced for 140 years. [8] Along with the closing of the plant, production of the Model 94 rifle (the descendant of the original Winchester rifle), Model 70 rifle, and Model 1300 shotgun were discontinued. The official press release sent out by U.S. Repeating Arms concerning the closure was released on January 17, 2006. The text is included below:

U.S. Repeating Arms Company To Close New Haven, CT Facility – U.S. Repeating Arms Company, maker of Winchester brand rifles and shotguns will close its New Haven, Connecticut manufacturing facility. Many efforts were made to improve profitability at the manufacturing facility in New Haven, and the decision was made after exhausting all available options.

Effective March 31, 2006, the New Haven manufacturing facility will stop manufacturing the Winchester Model 70, Model 94, and Model 1300.

Winchester Firearms will continue to sell and grow its current line of Select Over & Under shotguns, the new Super X3 autoloading shotgun, the new Super X autoloading rifle, and Limited Edition rifles. The company also plans to introduce new models in the future. There will be no change in Customer Service.

This action is a realignment of resources to make Winchester Firearms a stronger, more viable organization. Winchester Firearms plans to continue the great Winchester legacy and is very excited about the future.

Recovery

On August 15, 2006, Olin Corporation, owner of the Winchester trademarks, announced that it had entered into a new license agreement with Browning Arms Company [9] to make Winchester brand rifles and shotguns, though not at the closed Winchester plant in New Haven. The production of Model 1885 falling block action, Model 1892 and Model 1886 lever-action rifles are produced under licensed agreement by Miroku Corp. of Japan and imported to the United States by Browning. [10]

In 2008, FN Herstal announced that it would produce Model 70 rifles at its plant in Columbia, South Carolina. In 2013, assembly was moved to Portugal. [11]

In the summer of 2010, FN Herstal resumed production of the Winchester model 1894 and the evolution of the Winchester 1300, now called the Winchester SXP. [12] [13]

A number of gun cleaning kits, Chinese folding knives, [14] tools, and other accessories are also now sold under the Winchester trademark. [15]

SXP shotgun recall

In April 2015, the company recalled several variants of its SXP-model 12-gauge shotguns that the company says may unintentionally fire while the action is being closed. [16]

Ammunition

Winchester made rimfire .44 and .32 cartridges .44 and .32 rimfire rounds.jpg
Winchester made rimfire .44 and .32 cartridges

Winchester's success was founded on a cartridge, the .44 Henry rimfire, and the Henry and 1866 rifles designed for it. Winchester was a leading designer of rifle ammunition throughout its existence and has been responsible for some of the most successful cartridges ever introduced, including the .44-40 WCF (Winchester Center Fire), the .30 WCF (.30-30), the .50 BMG, the .270 Winchester, the .308 Winchester, the .243 Winchester, the .22 WMR (.22 Magnum), the .300 Winchester Magnum and the .350 Legend. In North America the .30-30 is the best-selling hunting cartridge in history; and the .308 Winchester, the commercial version of the military 7.62×51mm NATO, is not far behind, [17] and one of the most popular hunting cartridges in the world.[ citation needed ]

Olin Corporation continues to manufacture Winchester ammunition (the cartridge business was not sold to U.S. Repeating Arms) in several lines including Super-X, Supreme and Supreme Elite, AA and Super Target shotshells, and Winchester Cowboy Loads revolver cartridges.[ citation needed ]

Presidents

Archives

The company's factory collection is owned by the Cody Firearms Museum in Cody, Wyoming. [18]

See also

Related Research Articles

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

<span class="mw-page-title-main">John Browning</span> American firearms designer (1855–1926)

John Moses Browning was an American firearm designer who developed many varieties of military and civilian firearms, cartridges, and gun mechanisms, many of which are still in use around the world. He made his first firearm at age 13 in his father's gun shop and was awarded the first of his 128 firearm patents on October 7, 1879, at the age of 24. He is regarded as one of the most successful firearms designers of the 19th and 20th centuries and a pioneer of modern repeating, semi-automatic, and automatic firearms.

Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".

<span class="mw-page-title-main">Oliver Winchester</span> American businessman and politician

Oliver Fisher Winchester was an American businessman and politician, best known as being the founder of the Winchester Repeating Arms Company.

A semi-automatic firearm, also called a self-loading or autoloading firearm, is a repeating firearm whose action mechanism automatically loads a following round of cartridge into the chamber and prepares it for subsequent firing, but requires the shooter to manually actuate the trigger in order to discharge each shot. Typically, this involves the weapon's action utilizing the excess energy released during the preceding shot to unlock and move the bolt, extracting and ejecting the spent cartridge case from the chamber, re-cocking the firing mechanism, and loading a new cartridge into the firing chamber, all without input from the user. To fire again, however, the user must actively release the trigger, allow it to "reset", before pulling the trigger again to fire off the next round. As a result, each trigger pull only discharges a single round from a semi-automatic weapon, as opposed to a fully automatic weapon, which will shoot continuously as long as the ammunition is replete and the trigger is kept depressed.

<span class="mw-page-title-main">Rimfire ammunition</span> Type of ammunition that is only commonly found in small-caliber firearms

A rim-fire is a type of metallic cartridge used in firearms, where the primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845, by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the early 19th century, such as teat-fire and pinfire, only small caliber rimfire and centerfire cartridges have survived to the present day with regular use. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition found in the world today in terms of units manufactured and sold.

<span class="mw-page-title-main">Lever action</span> Type of firearm action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

Pump action is a type of manual firearm action that is operated by moving a sliding handguard on the gun's forestock. When shooting, the sliding forend is pulled rearward to eject any expended cartridge and typically to cock the hammer or striker, and then pushed forward to load a new cartridge into the chamber. Most pump-action firearms use an integral tubular magazine, although some do use detachable box magazines. Pump-action firearms are typically associated with shotguns, although it has been used in rifles, grenade launchers, as well as other types of firearms. A firearm using this operating mechanism is colloquially referred to as a pumpgun.

<span class="mw-page-title-main">.22 Winchester Magnum Rimfire</span> Rimfire cartridge

The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).

The U.S. Repeating Arms Company (USRAC) was an American manufacturer of firearms. It was established in 1981 and operated as an independent company until 1989, when it went bankrupt and was taken over by Fabrique Nationale Herstal. The company traced its origins to the Winchester Repeating Arms Company, which was famous for making Winchester rifles.

The Winchester Model 70 is a bolt-action sporting rifle. It has an iconic place in American sporting culture and has been held in high regard by shooters since it was introduced in 1936, earning the moniker "The Rifleman's Rifle". The action has some design similarities to Mauser designs and it is a development of the earlier Winchester Model 54, itself being based on a Mauser 98–type action.

Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

<span class="mw-page-title-main">Benjamin Tyler Henry</span> American gunsmith and manufacturer

Benjamin Tyler Henry was an American gunsmith and manufacturer. He was the inventor of the Henry rifle, the first reliable lever-action repeating rifle.

The Henry repeating rifle is a lever-action tubular magazine rifle famed both for its use at the Battle of the Little Bighorn and being the basis for the iconic Winchester rifle of the American Wild West.

The Winchester Model 71 was a lever-action rifle introduced in 1935 and discontinued in 1958.

The Winchester Model 1894 rifle is a lever-action repeating rifle that became one of the most famous and popular hunting rifles of all time. It was designed by John Browning in 1894 and originally chambered to fire two metallic black powder cartridges, the .32-40 Winchester and .38-55 Winchester. It was the first rifle to chamber the smokeless powder round, the .30 WCF in 1895. In 1901, Winchester created the new .32 Winchester Special caliber with production of rifles starting in 1902.

<span class="mw-page-title-main">Winchester Model 1892</span> Lever-action centerfire rifle

The Winchester Model 1892 was a lever-action repeating rifle designed by John Browning as a smaller, lighter version of his large-frame Model 1886, and which replaced the Model 1873 as the company's lever-action for pistol-caliber rounds such as the .44-40.

<span class="mw-page-title-main">Marlin Model 1894</span> Lever-action rifle

The Marlin Model 1894 is a lever-action repeating rifle introduced in 1894 by the Marlin Firearms Company of North Haven, Connecticut. At its introduction the rifle came with a 24-inch barrel and was chambered for a variety of rounds such as .25-20 Winchester, .32-20 Winchester, .38-40, and .44-40. Variants in other chamberings remain in production today.

<span class="mw-page-title-main">Volcanic Repeating Arms</span> American firearms manufacturer

The Volcanic Repeating Arms Company was an American company formed in 1855 by partners Horace Smith and Daniel B. Wesson to develop Walter Hunt's Rocket Ball ammunition and lever action mechanism. Volcanic made an improved version of the Rocket Ball ammunition, and a carbine and pistol version of the lever action gun to fire it. While the Volcanic Repeating Arms Company was short-lived, its descendants, Winchester Repeating Arms Company and Smith & Wesson became major firearms manufactures.

References

  1. 1 2 3 Taylor, Jim, A Short History of the Levergun.
  2. Boorman, Dean K., History of Winchester Firearms. Guilford, CT: Lyons Books (2001), p. 19.
  3. Shackleford, Steve, ed. (2010). Blade's guide to knives & their values (7th ed.). Iola, WI: Krause Publications. p. 148. ISBN   978-1-4402-0387-9.
  4. Thomson, Harry C.; MAyo, Lida (1991). United States Army in World War II: Technical Services, Ordnance Department: Procurement and Supply. Washington, D.C.: Center of Military History. p. 174. ISBN   978-1514795453.
  5. "World War II M1 Garands". gunsmagazine.com. Retrieved 2017-01-26.
  6. "1964 was a big year for Olin/Winchester. That was the year that their revised (for cheaper manufacture) line of firearms was introduced. The reaction from gun writers and the shooting public to the changes was swift and terrible, and Winchester has never regained their former position of dominance." Hawks, Chuck, "The Winchester Model 94".
  7. "Herstal Group".
  8. Out With A Bang: The Loss of the Classic Winchester Is Loaded With Symbolism, Washington Post , January 21, 2006.
  9. McLerran
  10. 株式会社ミロク:ショットガン&ライフル Archived 2017-09-27 at the Wayback Machine . Miroku-jp.com. Retrieved on 2013-07-21.
  11. "Where are Winchester Firearms manufactured?".
  12. "Model 94 – Winchester Repeating Arms – Product Family". Winchesterguns.com. Retrieved 2010-12-03.
  13. "SXP – Winchester Repeating Arms – Product Family". Winchesterguns.com. Retrieved 2010-12-03.
  14. Chinese folding, pocket, and hunting knives are sold under the Winchester trademark.
  15. ... and other "manly" accessories are also now sold under the Winchester trademark.
  16. "SXP Recall Information". Winchesterguns.com. Retrieved 5 September 2016.
  17. "Ever Popular .30's". Chuckhawks.com. Retrieved 2010-12-03.
  18. Nicholson, Ben. "18. Cody Firearms Museum, Cody, WY". Ben Nicholson. Retrieved 29 November 2022.

Further reading