Winchester Model 1200/1300 | |
---|---|
Type | Pump-action shotgun |
Place of origin | United States |
Service history | |
In service | 1964–present |
Production history | |
Manufacturer | Winchester |
Produced | 1964–2006 |
Specifications | |
Action | Pump-action |
Feed system | Tubular magazine |
The Model 1200 is a pump-action shotgun that was manufactured by the Winchester-Western Division of Olin Corporation, starting 1964. It was redesignated the Model 1300 in 1978 with minimal changes. Production ceased in 2006 when the U.S. Repeating Arms Company, the subsequent manufacturer, went bankrupt. A militarized version of the Model 1200 was acquired by the U.S. Army for use during the Vietnam War. It is still in active service within various conflicts throughout the 21st century.
The Winchester Model 1200 was introduced in 1964 as a lower-cost replacement for the Model 12. [1] [2] The Model 1300 was introduced in 1978 with minimal changes, mainly to furniture design and finish. [3] [4] [5] In 1983, when U.S. Repeating Arms Company became the manufacturer of Winchester firearms, production of the Model 1300 continued. [6] By 1992, 2.5 million units of the gun (all models) had been produced. [7] Production of the Model 1300 ceased in 2006, when the U.S. Repeating Arms Company went bankrupt. [8] In 2009, Fabrique Nationale d'Herstal (FN) commenced production of the Winchester SXP, based on the Model 1300. [9]
The Winchester Model 1200 pump action shotgun employs a rotating bolt in a bolt carrier (slide) rather than the tilting breechblock used in the Model 12. [10] The Model 1200 was the second shotgun design to utilize a rotating bolt; the Armalite AR-17 being the first. [6] The bolt locks directly into the barrel and has four locking lugs. The receiver is made from aluminium. The bolt carrier is connected to the fore-end (pump handle) by two connecting rails rather than the single connecting rail of the Model 12. The Model 1200 is also hammerless, in that it has an internal hammer. It has a trigger disconnector and lock-out bar safety located to the top front of the trigger guard (depressed from the right to left to fire). [11]
The Model 1200 has a conventional under-barrel tubular magazine, loaded by pushing the trapdoor elevator (forward of the trigger guard) inward as rounds are fed in. The magazine tube also serves as a guide for the pump handle and to secure the barrel. A ring under the barrel fits over the magazine tube and the threaded magazine cap is tightened to hold the barrel against the face of the receiver. [lower-alpha 1] The takedown design facilitates transport of long barreled versions. [lower-alpha 2]
To operate, a cartridge from the loaded magazine is chambered by cycling the action (pumping rearward then forward). As the bolt, moving forward, contacts the breech face, a linear cam and cam pin in the bolt carrier causes the bolt to rotate as the bolt carrier continues to move forward. Completing the full pump stroke locks the bolt. A slide lock prevents the bolt carrier (and pump handle) from moving until either the trigger is pulled or an unlocking button (located to the left rear of the trigger guard) is depressed. Upon firing, the action can be cycled again to reload. The Model 1200 is equipped with a trigger disconnector. If the trigger is not released before cycling the action to reload, it will not fire until the trigger has been released and depressed again. It will not slamfire like the Model 12 and other earlier designs. [13] [14]
The Winchester Model 1200 was initially produced with barrel lengths of 30 inches (760 mm) or 28 inches (710 mm) chambered for 2.75-inch (70 mm) cartridges in either 12, 16, or 20-gauge. The magazine, with a capacity of four rounds was provided with a wooden insert to limit magazine capacity to two rounds in the magazine. [lower-alpha 3] From 1966, it was offered with the option of the Winchester Recoil Reduction System, a telescopic butt recoil shock absorber to reduce the apparent recoil force. [15] [lower-alpha 4] [16] This coincided with the option of barrels chambered for 3 inches (76 mm). [17] In 1971, it was offered with the option of the Winchoke screw in choke tube system, supplied with a set of three tubes in improved cylinder (IC), modified (M) and full (F) choke. [15] [lower-alpha 6] In 1973, 16-gauge was dropped from the production line. [15] With introduction of the Model 1300, a 3-inch (76 mm) chamber was made standard. [20]
The Winchester Defender was offered with an extended magazine capable of holding seven 2.75-inch (70 mm) shells. The magazine tube reached the full length of its 18-inch (460 mm) barrel, which was chambered for 3-inch (76 mm) shells. It was fitted with the corn-cob style fore-end with concentric grooves. Even though the Model 1300 was introduced in 1978, the security series (similar short-barreled offerings), including the Defender, continued to be marketed as a Model 1200 until 1989, after which, it was advertised as a Model 1300. The security series had options for: rifle sights or bead, a rifled bore and pistol grip rather than a butt. A riot version was made, with a stainless steel barrel while a marine version also had chrome plating on other parts. [21] [22]
Winchester offered several combination gun lines. This took advantage of the take-down feature of the design and the interchangeability of barrels within a gauge. [lower-alpha 7] A single receiver was offered with two barrels: a longer barrel fitted with Winchokes suited for fowling and a shorter barrel, usually with rifle sights, suited for game hunting. [15] [23] [24]
The Ranger series were offerings aimed at the youth and women's market with a shorter length of pull (length of butt). The Model 120 and Model 2200 were economy versions of the gun. The latter was produced for the Canadian market. The Ted Williams Model 200 was a rebadged version of the gun produced for Sears. [25] [26] [27]
The gun has been provided with many options and various grades of finish. These have been combined by Winchester to offer numerous product lines, particularly for the Model 1300. Various options are as follows: [3] [19] [28] [29] [30]
Barrels: Barrels have ultimately been offered in lengths from 18 inches (460 mm) to 30 inches (760 mm) in 2-inch (50 mm) increments. Barrels have been chambered for 12, 16, or 20-gauge with either a 2.75-inch (70 mm) or 3-inch (76 mm) chamber. They have been offered with fixed choke (IC, M, F, Skeet and CB) or with Winchoke attachments. They have been manufactured from either steel or stainless steel and smooth-bored or rifled, with or without vent ribs.
Magazine tube: Generally four or seven 2.75-inch (70 mm) shells. Other tubular magazine lengths have been reported.
Sights: Single front bead, two bead (front and rear), fibre optic sights, rifle sights (adjustable) and fitted for scope (with mounts provided).
Metal finish: Blued, camouflage pattern or chrome plated. Rolled receiver engraving on high-end lines.
Furniture Butt: different butt profiles, standard or shorter length of pull, Winchester Recoil Reduction System, pistol grip butt and pistol grip only. Fore-end: full or corn-cob.
Furniture material: Timber (walnut and other species on economy lines), laminated, composite or synthetic. Timber finish, full colour or camouflage pattern.
A small number of the Model 1200 were acquired by the United States Army in 1968 and 1969. [31] This militarized Model 1200 was fitted with a perforated handguard (bayonet band) over the 20-inch (510 mm) 12-gauge barrel chambered for 2.75-inch (70 mm) shot shells. The bayonet band incorporated a bayonet mount and front sling swivel. A rear sling swivel was affixed to the underside of the wooden buttstock. The fore-end was also timber. The bayonet mount accepted the M1917 bayonet. [32] [lower-alpha 8]
In 1979, Mossberg was awarded a contract to supply its Model 500 shotguns to the U.S. Army and the militarized 590 model has subsequently been introduce to all services. However, the Model 1200 remained in service and were used by National Guard units deployed to Iraq in 2003. The Model 1200 was also used during the invasion of Grenada, the invasion of Panama, the U.S. intervention in the civil war in Somalia, Operation Desert Storm and the War in Afghanistan. During the latter conflicts, some were retrofitted with folding stocks, making them more compatible with urban warfare. [33]
In 1999, the semiautomatic Benelli M4 was accepted as the primary U.S. service shotgun. [33] [34]
The Model 1200 or Model 1300 has also been acquired by other countries for use by their militaries or security forces.
A shotgun is a long-barreled firearm designed to shoot a straight-walled cartridge known as a shotshell, which discharges numerous small spherical projectiles called shot, or a single solid projectile called a slug. Shotguns are most commonly used as smoothbore firearms, meaning that their gun barrels have no rifling on the inner wall, but rifled barrels for shooting sabot slugs are also available.
John Moses Browning was an American firearm designer who developed many varieties of military and civilian firearms, cartridges, and gun mechanisms, many of which are still in use around the world. He made his first firearm at age 13 in his father's gun shop and was awarded the first of his 128 firearm patents on October 7, 1879, at the age of 24. He is regarded as one of the most successful firearms designers of the 19th and 20th centuries and a pioneer of modern repeating, semi-automatic, and automatic firearms.
The Winchester Model 1897, also known as the Model 97, M97, Riot Gun, or Trench Gun, is a pump-action shotgun with an external hammer and tube magazine manufactured by the Winchester Repeating Arms Company. The Model 1897 was an evolution of the Winchester Model 1893 designed by John Browning. From 1897 until 1957, over one million of these shotguns were produced. The Model 1897 was offered in numerous barrel lengths and grades, chambered in 12 and 16 gauge, and as a solid frame or takedown. The 16-gauge guns had a standard barrel length of 28 in (71 cm), while 12-gauge guns were furnished with 30 in (76 cm) barrels. Special length barrels could be ordered in lengths as short as 20 in (51 cm) or as long as 36 in (91 cm). Since the time the Model 1897 was first manufactured, it has been used to great effect by American military personnel, law enforcement officers, and hunters.
A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.
Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada and China. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.
The Mossberg 500 (M500) is a series of pump-action shotguns manufactured by O.F. Mossberg & Sons. The 500 series comprises widely varying models of hammerless repeaters, all of which share the same basic receiver and action, but differ in bore size, barrel length, choke options, magazine capacity, stock and forearm materials. Model numbers included in the 500 series are the 500, 505, 510, 535, and 590. The Revelation 310 and the New Haven 600 were also variations of the 500 series produced by Mossberg under different names. By 2021, about 11 million M500s had been produced, making it the most-produced shotgun of all time.
The Winchester Repeating Arms Company was a prominent American manufacturer of repeating firearms and ammunition. The firm was established in 1866 by Oliver Winchester and was located in New Haven, Connecticut. The firm went into receivership in 1931 and was bought by the Western Cartridge Company, a forerunner of the Olin Corporation. The Winchester brand name is still owned by the Olin Corporation, which makes ammunition under that name. The Winchester name is also used under license for firearms produced by two subsidiaries of the Herstal Group – FN Herstal of Belgium and the Browning Arms Company of Ogden, Utah.
Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.
The Ithaca 37, also known as the Ithaca Model 37, is a pump-action shotgun made in large numbers for the civilian, law enforcement and military markets. Based on a 1915 patent by firearms designer John Browning for a shotgun initially marketed as the Remington Model 17, it utilizes a novel combination ejection/loading port on the bottom of the gun which leaves the sides closed to the elements.
The ArmaLite AR-7 Explorer is a semi-automatic firearm in .22 Long Rifle caliber, developed in 1959 from the AR-5 that was adopted by the U.S. Air Force as a pilot and aircrew survival weapon. The AR-7 was adopted and modified by the Israeli Air Force as an aircrew survival weapon in the 1980s.
The Browning Automatic 5, most often Auto-5 or simply A-5, is a recoil-operated semi-automatic shotgun designed by John Browning and manufactured by Fabrique Nationale de Herstal. It was the first successful semi-automatic shotgun design, and remained in production until 1998. The name of the shotgun designates that it is an autoloader with a capacity of five rounds, four in the magazine and one in the chamber. Remington Arms and Savage Arms sold variants called the Remington Model 11 and Savage Model 720 that were nearly identical but lacked the magazine cutoff found on the Browning.
The Winchester Model 1894 rifle is a lever-action repeating rifle that became one of the most famous and popular hunting rifles of all time. It was designed by John Browning in 1894 and originally chambered to fire two metallic black powder cartridges, the .32-40 Winchester and .38-55 Winchester. It was the first rifle to chamber the smokeless powder round, the .30 WCF in 1895. In 1901, Winchester created the new .32 Winchester Special caliber with production of rifles starting in 1902.
The CETME Model L is a Spanish 5.56×45mm NATO assault rifle developed in the late 1970s at the state-owned small arms research and development establishment CETME located in Madrid. The rifle retains many of the proven design elements the institute had used previously in its CETME Model 58 battle rifles.
The Sola is a submachine gun that was built by Societe Luxembourgeoise SA in Luxembourg between 1954 and 1957. It uses the 9×19mm Parabellum round and is capable of using MP 40-type magazines, which were popular around Europe at the time. This weapon saw service in Africa and several are still in use today.
The CETME Model 58 is a stamped-steel, select-fire battle rifle produced by the Spanish armaments manufacturer Centro de Estudios Técnicos de Materiales Especiales (CETME). The Model 58 used a 20-round box magazine and was chambered for the 7.62×51mm NATO round. The CETME 58 would become the foundation of the widely deployed German Heckler & Koch G3 battle rifle. Semi-automatic variants were also produced for the civilian market.
The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.
The Remington Model 10 is a pump-action shotgun designed in 1908 by John Pedersen for Remington Arms. It has an internal striker within the bolt and a tube magazine which loaded and ejected from a port in the bottom of the receiver. An updated version, the Model 29, was introduced in 1930 with improvements made by C.C. Loomis.
The Winchester Model 1911 SL Shotgun was a self-loading, recoil-operated shotgun produced by the Winchester Repeating Arms Company from 1911 to 1925. It was Winchester's first autoloading shotgun, but design flaws kept it from providing competition for the autoloading shotguns made by Remington Arms and Browning Arms Company.
The Winchester Model 1903 was the first commercially available semi-automatic firearm made by the Winchester Repeating Arms Company.
The Winchester Model 67 was a single-shot, bolt-action .22 caliber rimfire rifle sold from 1934 to 1963 by Winchester Repeating Arms Company. Based on the earlier Model 60, the Model 67 was the mainstay of Winchester's inexpensive single-shot rifle lineup. A rare variant, the Model 677, was produced with telescopic sights and no provisions for iron sights.