.50-90 Sharps

Last updated
.50-90 Sharps
Sharps 50-90.jpg
.50-90 Sharps cartridges
TypeRifle
Place of origin United States
Service history
Used by United States
Production history
Designer Sharps Rifle Manufacturing Company
Designed1872
ManufacturerSharps Rifle Manufacturing Company
Produced1872–1876
Variants.50-100, .50-110
Specifications
Parent case.50 Basic
Case typeRimmed, straight
Bullet diameter.512 in (13.0 mm)
Neck diameter.528 in (13.4 mm)
Shoulder diameter.528 in (13.4 mm)
Base diameter.585 in (14.9 mm)
Rim diameter.663 in (16.8 mm)
Case length2.50 in (64 mm)
Overall length3.20 in (81 mm)
Primer typeLarge rifle
Ballistic performance
Bullet mass/typeVelocityEnergy
365 gr (24 g) FN1,814 ft/s (553 m/s)2,668 ft⋅lbf (3,617 J)
440 gr (29 g) FN1,749 ft/s (533 m/s)2,989 ft⋅lbf (4,053 J)
550 gr (36 g) FN1,448 ft/s (441 m/s)2,561 ft⋅lbf (3,472 J)
Source(s): Accurate black powder [1]

The .50-90 Sharps, also known as the .50-212" Sharps, is a black-powder rifle cartridge cartridge that was introduced by Sharps Rifle Manufacturing Company in 1872 as a buffalo (American bison) hunting round. Like other large black-powder rounds, it incorporates a heavy bullet and a large powder volume, leading to high muzzle energies.

Contents

Specifications

The standard factory loads, produced and sold by the Sharps Rifle Manufacturing Company and the Sharps Rifle Company were .50/100/425 (.50 caliber/100 grains black powder/425 grain grease grooved bullet) and .50/100/473 (.50 caliber/100 grains black powder/473 grain grease grooved bullet) with a paper patched bullet. Factory loads manufactured by any of the Sharps companies were mostly hand-loaded which made them expensive to produce. This naturally invited competition. Winchester offered the cartridge loaded .50/90/473 (.50 caliber/90 grains black powder/473 grain grease grooved bullet) with paper patched bullets which may be how the cartridge came to be commonly known as the .50-90. The .50-90 Sharps is similar to the .50-100 Sharps and .50-110 Sharps cartridges. All three use the same 2.5-inch (64 mm) case, the latter two being loaded with more grains of black powder. All rifles made for the .50-90 Sharps should be able to use the .50-110 and .50-100 cartridges due to the case dimensions being nearly identical.

Bullet diameter was typically 0.512 inches (13.0 mm) diameter. Bullets weighed from 335 to 700 grains (21.7 to 45.4 g). Historical loads using black powder have muzzle energy in the 1,630 to 1,985 foot-pounds force (2,210 to 2,691 J) range, [2] while modern loads using smokeless powder give 2,561 to 2,989 foot-pounds force (3,472 to 4,053 J) of energy. [1]

History

Shiloh Sharps rifle with .50-90 Sharps cartridges Shiloh Sharps 50-90.jpg
Shiloh Sharps rifle with .50-90 Sharps cartridges

The buffalo (American bison) is a large herbivorous animal and difficult to take down reliably, which has led to a demand for cartridges designed specifically for buffalo hunting. The .50-90 was created with this purpose in mind. As a result, the cartridge became immediately popular with the professional buffalo hunters on the Western plains. At the time of its invention, there were no special powders or bullet types, and the knowledge of ballistics was fairly limited. Thus, when trying to create a more effective big game cartridge, the designers simply expanded the dimensions of prior cartridges. [3]

Billy Dixon used a Sharps .50-90 at the Second Battle of Adobe Walls on June 27, 1874, to make his legendary 1,538-yard (1,406 m) shot. [4] [5]

Today, the cartridge is largely obsolete. Ammunition is no longer mass-produced by any large manufacturers, with the exception of a few small boutique manufacturers, such as Buffalo Arms. Brass and bullets are produced, but loaded ammunition must either come from a custom shop or be handloaded. Rifles are only produced on a semi-custom basis by a few companies. Rifles in this caliber are typically used for hunting large game and historical reenactments. Occasionally, .50-90 rifles are used for vintage rifle shooting competitions, but the commercial availability of other contemporary cartridges such as the .45-70, have made the .50-90 cartridge less popular as a result.

See also

Related Research Articles

<span class="mw-page-title-main">Rifle</span> Common long range firearm

A rifle is a long-barreled firearm designed for accurate shooting and higher stopping power, with a barrel that has a helical pattern of grooves (rifling) cut into the bore wall. In keeping with their focus on accuracy, rifles are typically designed to be held with both hands and braced firmly against the shooter's shoulder via a buttstock for stability during shooting. Rifles are used extensively in warfare, law enforcement, hunting, shooting sports and crime.

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">Elephant gun</span> Firearm of large caliber for hunting elephant and other large game

An elephant gun is a large caliber gun, rifled or smoothbore, originally developed for use by big-game hunters for elephant and other large game. Elephant guns were black powder muzzle-loaders at first, then black powder express rifles, then later used smokeless powder cartridges.

<span class="mw-page-title-main">.22 Long Rifle</span> Common ammunition cartridge

The .22 Long Rifle or simply .22 LR or 22 is a long-established variety of .22 caliber rimfire ammunition originating from the United States. It is used in a wide range of rifles, pistols, revolvers, shotguns, and submachine guns.

Internal ballistics, a subfield of ballistics, is the study of the propulsion of a projectile.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 14 years, before being replaced by the .38 Long Colt in 1892.

The .30-06 Springfield cartridge, 7.62×63mm in metric notation, and called the .30 Gov't '06 by Winchester, was introduced to the United States Army in 1906 and later standardized; it remained in military use until the late 1970s. The ".30" refers to the caliber of the bullet in inches, .300 and the "06" refers to the year the cartridge was adopted, 1906. It replaced the .30-03, 6mm Lee Navy, and .30-40 Krag cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the 7.62×51mm NATO and 5.56×45mm NATO, both of which remain in current U.S. and NATO service. It remains a very popular sporting round, with ammunition produced by all major manufacturers.

<span class="mw-page-title-main">7×57mm Mauser</span> German military rifle cartridge

The 7×57mm Mauser is a first-generation smokeless powder rimless bottlenecked rifle cartridge. It was developed by Paul Mauser of the Mauser company in 1892 and adopted as a military cartridge by Spain in 1893. It was subsequently adopted by several other countries as the standard military cartridge, and although now obsolete as a military cartridge, it remains in widespread international use as a sporting round. The 7×57 Mauser was a popular stalking cartridge and sporting rifles in this chambering were made by the famous British riflemakers, such as John Rigby, Holland and Holland, Westley Richards and others. British cartridge nomenclature designated caliber in inches, and the cartridge was known as the .275 bore after the measurement of a 7 mm rifle's bore across the lands.

<span class="mw-page-title-main">.25-06 Remington</span> US hunting rifle cartridge

Considered by many as the most balanced of the "quarter bores" for hunting medium-sized game, the .25-06 Remington remained in obscurity as a wildcat cartridge for nearly half a century before being standardized by Remington in 1969.

<span class="mw-page-title-main">.45-70</span> Rifle cartridge designed by the U.S. Army

The .45-70, also known as the .45-70 Government, .45-70 Springfield, and .45-2110" Sharps, is a .45 caliber rifle cartridge originally holding 70 grains of black powder that was developed at the U.S. Army's Springfield Armory for use in the Springfield Model 1873. It was a replacement for the stop-gap .50-70 Government cartridge, which had been adopted in 1866, one year after the end of the American Civil War, and is known by collectors as the "Trapdoor Springfield".

<span class="mw-page-title-main">.458 Winchester Magnum</span> Rifle cartridge

The .458 Winchester Magnum is a belted, straight-taper cased, Big Five game rifle cartridge. It was introduced commercially in 1956 by Winchester and first chambered in the Winchester Model 70 African rifle. It was designed to compete against the .450 Nitro Express and the .470 Nitro Express cartridges used in big bore British double rifles. The .458 Winchester Magnum remains one of the most popular large game cartridges, and most major ammunition manufacturers offer a selection of .458 ammunition.

The .416 Rigby is a rifle cartridge designed in 1911 by London based gunmaker John Rigby & Company, for hunting dangerous game. It is the first cartridge to use a bullet of .416 inch diameter. The rifles, as built by John Rigby & Co., were initially made up on the Magnum Mauser 98 action, although in later years, some were made on standard length actions, a perfect example being the rifle used by legendary professional hunter Harry Selby. Other famous users of the cartridge were Commander David Enderby Blunt, John Taylor, and Jack O'Connor.

<span class="mw-page-title-main">.30-30 Winchester</span> Rifle cartridge designed by the Winchester Repeating Arms Company

The .30-30 Winchester cartridge was first marketed for the Winchester Model 1894 lever-action rifle in 1895. The .30-30, as it is most commonly known, along with the .25-35 Winchester were offered that year as the United States' first small-bore sporting rifle cartridges designed for smokeless powder. Since its introduction, it has been surpassed by many cartridges in the long-range shooting attributes of speed, energy, and trajectory, yet remains in widespread use because of its practical effectiveness in forested hunting situations.

<span class="mw-page-title-main">Overpressure ammunition</span> Type of small arms ammunition

Overpressure ammunition, commonly designated as +P or +P+, is small arms ammunition that has been loaded to produce a higher internal pressure when fired than is standard for ammunition of its caliber, but less than the pressures generated by a proof round. This is done typically to produce rounds with a higher muzzle velocity and stopping power, such as ammunition used for security, defensive or hunting purposes. Because of this, +P ammunition is typically found in handgun calibers which might be used for armed security and defensive purposes.

<span class="mw-page-title-main">7mm Remington Magnum</span> Rifle cartridge

The 7mm Remington Magnum rifle cartridge was introduced as a commercially available round in 1962, along with the new Remington Model 700 bolt-action rifle. It is a member of the belted magnum family that is directly derived from the venerable .375 H&H Magnum. The original purpose of the belted magnum concept taken from the .300 H&H Magnum and .375 H&H Magnum, was to provide precise headspace control, since the sloping shoulders, while easing cartridge extraction, were unsuitable for this purpose. Improved cartridge extraction reliability is desirable while hunting dangerous game, in particular when a fast follow-up shot is required. The 7mm Remington Magnum is based on the commercial .264 Winchester Magnum, .338 Winchester Magnum, and .458 Winchester Magnum, which were based on the same belted .300 H&H Magnum and .375 H&H Magnum cases, trimmed to nearly the same length as the .270 Weatherby Magnum.

<span class="mw-page-title-main">.50-70 Government</span> Rifle cartridge

The .50-70 Government, also known as the .50-70 Musket, .50-70 Springfield, and .50-134" Sharps) is a black powder cartridge adopted in 1866 for the Springfield Model 1866 trapdoor rifle.

The .45-90 Sharps, also known as the .45-2410" Sharps, is a black powder rifle cartridge introduced in 1877 by the Sharps Rifle Manufacturing Company and was developed for hunting and long range target shooting. In the modern day, it is used for Black Powder Cartridge Rifle competitions.

<span class="mw-page-title-main">.50-140 Sharps</span>

The .50-140 Sharps, also known as the .50-314" Sharps, is a black-powder rifle cartridge that was introduced in 1884, as a big game hunting round. It is believed to have been introduced for the Sharps-Borchardt Model 1878 rifle. The cartridge is very similar to the .500 Black Powder Express.

The 6 bore, also known as the 6 gauge, is an obsolete caliber that was used commonly in 19th-century black-powder firearms.

<span class="mw-page-title-main">.500 Nitro Express</span>

The .500 Nitro Express is a rifle cartridge designed for hunting large and dangerous game animals in Africa and India. This cartridge was primarily designed for use in double rifles though various single shots were produced on the Farquarson action and at least one major company (Heym) produced it in bolt-action configuration. It was commonly available in two lengths: a 3.00 in (76 mm) and a 3.25 in (83 mm) version.

References

  1. 1 2 Accurate Smokeless Powders Loading Guide Number Two (Revised), Accurate Arms Co., Wolfe Publishing, 2000, p. 368
  2. Buffalo Cartridges by Chuck Hawks
  3. Cartridges of the World 8th Edition, by Frank C. Barnes, DBI Books, 1997, ISBN   0-87349-178-5. p. 140.
  4. "Buffalo hunters and Indians clash at Adobe Walls". Archived from the original on 2013-09-28. Retrieved 2010-07-16.
  5. "Replicating Billy Dixon's Legendary Long-Shot". Archived from the original on 2007-08-05. Retrieved 2007-07-18.