| SparrowHawk | |
|---|---|
 | |
| Role | Two seat homebuilt ultralight autogyro |
| National origin | United States |
| Manufacturer | American Autogyro Inc, Buckeye, Arizona |
| First flight | February 2003 (proof of concept vehicle) |
| Introduction | 2003 |
| Number built | 125 kits sold by mid-2008 |
The AAI SparrowHawk is an American two-seat pusher ultralight autogyro, available in kit form for amateur construction.
AAI (American Autogyros Inc) was formed as a division of Groen Brothers Aviation (GBA) late in 2002, with the initial task of improving stability in existing autogyros. After a series of such modifications they decided to develop their own aircraft and a proof-of-concept machine first flew in February 2003. This was based around the pod of an RAF 2000 autogyro but had a different tail design. The first AAI built production prototype flew on 25 February 2004. [1]
The SparrowHawk is a pusher configuration autogyro with an uncowled single 160 hp (120 kW) Subaru EJ25 flat-four engine mounted behind a totally enclosed glass fibre cabin. This pod, which seats two side by side, has almost triangular sides and is entered via optional large, partially glazed doors. An aluminum keel projects aft of the pod and a vertical member fixed to it carries the engine and rotor mast. The two-bladed rotor is of bonded metal construction. [1]
The tail unit is attached by a pair of aluminum centreline booms. The upper one is mounted directly on the vertical engine/rotor mast and is cranked near midpoint to clear the propeller tips. The lower one is attached well below the keel on an extension plate. They support a deep, wide chord, finless rudder, formed from honeycomb composites material and carrying a pair of fixed horizontal stabilizers with small endplate fins. The rudder has self-centring springs. The resulting cruciform structure is centred on the propeller thrust line for dynamical stability. [1]
The SparrowHawk has a tricycle undercarriage with three equal-size wheels mounted off the keel, supplemented by a smaller tailwheel. Steering on the ground is by rudder pedal-controlled differential braking and a steerable nosewheel. [1]
The first kit built SparrowHawk flew in Russia on 23 September 2004. Dealerships were established in North, Central and South America, in India, East Asia and South America. 125 kits had been sold by mid-2008. By November 2009 there were 45 SparrowHawks on the US civil register. [1] One SparrowHawk was on the European (west of Russia) registers in mid-2010. [2] The Russian version is marketed by Aro-Avia. [1]
In 2008 GBA announced its intention to sell off the SparrowHawk program. [1] A press release in January 2011 announced an agreement with Guangzhou Suntrans Aviation Science and Technology Co., Ltd. to form a Cooperative Joint Venture for the manufacture of SparrowHawks in China. [3]
Data from Jane's All the World's Aircraft 2010/11 [1]
General characteristics
Performance
An autogyro, or gyroplane, is a class of rotorcraft that uses an unpowered rotor in free autorotation to develop lift. While similar to a helicopter rotor in appearance, the autogyro's unpowered rotor disc must have air flowing upward across it to make it rotate.
The ADI Bumble Bee is an ultralight gyrocopter marketed by Aircraft Designs Inc (ADI). It was the first of its kind when it flew in 1983 and is still available in plans form for homebuilding.
The Cierva C.19 was a 1930s British two-seat autogyro, designed by Spanish engineer Juan de la Cierva. It was built by Avro as the Avro Type 620. It proved to be the most successful and widely produced of the early de la Cierva designs.
The slowed rotor principle is used in the design of some helicopters. On a conventional helicopter the rotational speed of the rotor is constant; reducing it at lower flight speeds can reduce fuel consumption and enable the aircraft to fly more economically. In the compound helicopter and related aircraft configurations such as the gyrodyne and winged autogyro, reducing the rotational speed of the rotor and offloading part of its lift to a fixed wing reduces drag, enabling the aircraft to fly faster.
The Magni M-16 Tandem Trainer is an Italian sport autogyro, seating two in tandem, designed and produced by Magni Gyro srl of Besnate. It and the M-22 Voyager, a touring variant with baggage space and increased endurance, remain in production in 2010 with over 150 sold.
Skyworks Aeronautics Corp., formerly Groen Brothers Aviation, Inc., Groen Aeronautics Corporation and Skyworks Global, is an American autogyro research and development company based in Chicago. The company was founded in 1986 by David Groen and his late brother Jay Groen in Salt Lake City, Utah. David Groen remains as Senior Advisor.
The Irkut A-002 is a three-seat, pusher configuration autogyro developed in Russia through the 2000s by the United Constructor Bureau for Light Aircraft team of the Irkutsk Aircraft Production Association (IAPO) "Irkut" as the first independent product. Take-off is possible when wind speed exceeds 8 m/s, otherwise a running start of up to 15 m is necessary. The riveted covering is made of duralumin. The first produced consignment consisted of five autogyros. The A-002M is a further development.
The Aero-Astra Okhotnik is a Russian single engine, three seat autogyro of pusher, pod and boom configuration. It has been developed into several variants from 2001 to 2007.
The OSKBES MAI-208 is a single-engine, two-seat autogyro, designed and built in Russia, which utilises the fuselage of the MAI-223 ultralight. It had been completed but not flown by spring 2010.
The Groen Hawk 4 was a single engine, pusher configuration, four seat autogyro built in the United States in the late 1990s. Three prototypes, two piston engined and one turboprop powered, were flown but the Hawk did not go into production.
The Kamerton-N Ratnik is a 1990s Russian light autogyro designed and built by Kamerton-N Ltd of Shchyolkovo.
The GT-Gyroplanes Kruza (Cruiser) is an Australian autogyro, designed by brothers Geoff and Alistair Morrison and produced by GT-Gyroplanes of Moama, New South Wales. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Gyro-Kopp-Ters Midnight Hawk is an American autogyro, designed by Bob and Arden Kopp and produced by their company, Gyro-Kopp-Ters of Lake City, Florida. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Rabouyt D2 was a two-seat autogyro, with an engine driven rotor for vertical take-offs. In level flight the aircraft was powered by the same engine driving a shrouded, pusher configuration propeller. It was designed and built in France in the early 1970s by Denis Rabouyt.
The Aviator Shershen' is a Russian two seat biplane, sold in kit form. It first flew in 2005 and several variants have been produced, with a choice of engines.
The Amax Eagle TT is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria, introduced in the 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The TsAGI A-4, sometimes anglicised as CAHI A-4 or ZAGI A-4, was an early Russian autogyro, influenced by Cierva designs and delivered in small numbers to the Soviet Air Force in 1934.
The Vortech Shadow is an American autogyro that was designed by Tyler Flight, Inc. and produced by Vortech of Fallston, Maryland. The aircraft is supplied as a kit and also in the form of plans for amateur construction. Vortech also supplies rotor blades for the design.
The Groen ShadowHawk was a proposed American autogyro that was under development in the mid-2010s by Groen Aeronautics of Midvale, Utah for the surveillance role. The aircraft was intended to be supplied complete and ready-to-fly.
The Tervamäki ATE-3 is a single-seat autogyro developed in Finland by Jukka Tervamäki and Aulis Eerola in the late 1960s and whose plans were distributed for amateur construction. Other than the designers' own prototype, at least three others were built in Finland and Denmark, The designation stands for Autogyro Tervamäki Eerola, and followed Tervamäki's JT-1 and JT-2 designs. An ATE-3 played a prominent role in a Finnish gangster film of 1969, Leikkikalugangsteri.
