 | |
| Manufacturer | A. J. Stevens & Co. Ltd Wolverhampton |
|---|---|
| Successor | AJS Model E |
| Engine | 748 cc side valve V-Twin |
| Power | 6bhp |
| Transmission | chain to three-speed countershaft gearbox. |
| Weight | 276 pounds (125 kg) (dry) |
The AJS Model D is a British motorcycle made by A. J. Stevens & Co. Ltd in Wolverhampton between 1912 and 1925. With production halted by the First World War AJS managed to develop the Model D into a popular sidecar machine and it was eventually replaced by the larger capacity AJS Model E. [1]
In 1905 the Stevens Motor Manufacturing Company built a V-twin motorcycle powered by a JA Prestwich Industries Ltd motor, with leading-link front forks and a swinging fork at the rear. [2] A new company, A J Stevens & Co (AJS), was founded in 1909 to manufacture motorcycles and at the 1912 London Motorcycle show they launched the 698cc side valve AJS Model D. Featuring cylinders at 50 degrees and chain drive to a three speed countershaft gearbox with a hand gear change, the original engines had quickly removable cylinder heads but after problems with oil leaks a more permanent head was specified for 1913. [1] The side valve engine was lubricated by a 'total loss' system operated by a hand pump. Ignition was achieved with a Splitdorf Magneto and the fuel system featured an Amac automatic carburettor. The silencer was made from cast aluminium and the frame was a tubular 'diamond' construction, with Brampton bi-flex front forks, which had an unusual two way movement, and quickly detachable wheels. The sidecar version of the Model D proved particularly successful and became so popular that AJS were not able to meet demand. [3]
The outbreak of the First World War in 1914 nearly saw the end of the company as a motorcycle producer as they failed to secure motorcycle contracts for the armed forces and the factory was turned over to produce munitions for the war effort instead. In 1916 the Ministry of Munitions banned production of motorcycles except for military use, but in 1917 they needed to fulfil an order from Russia for large numbers of motorcycles and AJS were contracted to build 1100 6 hp military motorcycles, enabling them to continue development of the Model D despite the restrictions. [3]
After the war ended in November 1918 and the Ministry restrictions were lifted, AJS restarted motorcycle production at a new factory at Graisley Hill in Wolverhampton and the Model D was resurrected with the capacity increased to 748cc and a new design of saddle and fuel tank. The idea of detachable cylinder heads was reintroduced with a cross strap and tie bolts to help ensure that they remained oil tight. [1] At the Graisley Hill works AJS had their own foundry, enamelling facility, frame works and press as well as the motorcycle production line. Except for a few electrical and rubber components, the whole of the Model D was made in-house and the company also supplied engines to Brough Superior, OK Supreme and the Morgan Motor Company. [4]
An updated 7 hp version of the Model D was launched at the Olympia Motorcycle Show in November 1920. In 1923 a cheaper version called the Model D1 was introduced and 1924 was the best year for sales, which continued to outstrip the capacity of the factory despite increasing the Graiseley Hill works to 230,000 square feet. [3]
The Model D remained in production until 1925 and became popular as a sidecar machine. In 1925 it was developed into the AJS Model E which had the capacity increased further to 799cc and a new design of frame to allow a lower seat height. The Model E was designed for sidecar use and was later increased to 990cc before production ended again on the outbreak of the Second World War in 1939. [1]
The Norton Motorcycle Company is an English motorcycle marque, originally from Birmingham, England, UK. It was founded in 1898 as a manufacturer of "fittings and parts for the two-wheel trade". By 1902 the company had begun manufacturing motorcycles with bought-in engines. In 1908 a Norton-built engine was added to the range. This began a long series of production of single and eventually twin-cylinder motorcycles, and a long history of racing involvement.
BMW's motorcycle history began in 1921 when the company commenced manufacturing engines for other companies. BMW's own motorcycles—sold under the BMW Motorrad brand—began in 1923 with the BMW R 32, which was powered by a flat-twin engine. Production of motorcycles with flat-twin engines continues to this day, however BMW has also produced many models with other types of engine.
Velocette is a line of motorcycles made by Veloce Ltd, in Hall Green, Birmingham, England. One of several motorcycle manufacturers in Birmingham, Velocette was a small, family-owned firm, selling almost as many hand-built motorcycles during its lifetime, as the mass-produced machines of the giant BSA and Norton concerns. Renowned for the quality of its products, the company was "always in the picture" in international motorcycle racing, from the mid-1920s through the 1950s, culminating in two World Championship titles and its legendary and still-unbeaten 24 hours at over 100 mph (161 km/h) record. Veloce, while small, was a great technical innovator and many of its patented designs are commonplace on motorcycles today, including the positive-stop foot shift and swinging arm rear suspension with hydraulic dampers.
AJS was the name used for cars and motorcycles made by the Wolverhampton, England, company A. J. Stevens & Co. Ltd, from 1909 to 1931, by then holding 117 motorcycle world records. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles till 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers.
Brough Superior motorcycles, sidecars, and motor cars were made by George Brough in his Brough Superior works on Haydn Road in Nottingham, England, from 1919 to 1940. The motorcycles were dubbed the "Rolls-Royce of Motorcycles" by H. D. Teague of The Motor Cycle newspaper. Approximately 3048 motorcycles were made in the 21 years of production; around a third of that production still exists. T. E. Lawrence owned eight of these motorcycles and died from injuries sustained when he crashed number seven; the eighth was on order. Moving forward to 2008, vintage motorcycle enthusiast Mark Upham acquired the rights to the Brough Superior name. In 2013 he met motorcycle designer Thierry Henriette and asked him to design a new Brough Superior motorcycle. Three months later a prototype of a new SS100 was shown in Milan.
Clyno Engineering Company, later Clyno Engineering Company (1922) Ltd, was a motorcycle and car manufacturer that operated in Thrapston from 1909 to 1910 and then in Wolverhampton from 1910 to 1929. During this time they produced over 15,000 motorcycles and between 36,000 and 40,000 cars, at one point becoming Britain's third largest car manufacturer.
Vincent Motorcycles was a British manufacturer of motorcycles from 1928 to 1955. The business was established by Philip Vincent who bought an existing manufacturing name HRD, initially renaming it as Vincent HRD, producing his own motorcycles as HRD did previously with engines purchased as complete assemblies from other companies. From 1934, two new engines were developed as single cylinder in 500 cc and v-twin 1,000 cc capacities. Production grew from 1936, with the most-famous models being developed from the original designs after the War period in the late 1940s.
Matchless is one of the oldest marques of British motorcycles, manufactured in Plumstead, London, between 1899 and 1966. A wide range of models were produced under the Matchless name, ranging from small two-strokes to 750 cc four-stroke twins. Matchless had a long history of racing success; a Matchless ridden by Charlie Collier won the first single-cylinder race in the first Isle of Man TT in 1907.
The Cotton Motor Company, was a British motorcycle manufacturer of 11a Bristol Road, Gloucester, and was founded by Frank Willoughby Cotton in 1918. F.W. presided over the company until his retirement in 1953. The company was reconstituted as E. Cotton (Motorcycles) Ltd, and traded until 1980. The marque was later resurrected in the late 1990s by a business which manufactured replicas of earlier machines.
Ariel Motorcycles was a British maker of bicycles and then motorcycles in Bournbrook, Birmingham. It was an innovator in British motorcycling, part of the Ariel marque. The company was sold to BSA in 1951 but the brand survived until 1967. Influential Ariel designers included Val Page and Edward Turner. The last motorcycle-type vehicle to carry the Ariel name was a short-lived three-wheel tilting moped in 1970.
Douglas was a British motorcycle manufacturer from 1907–1957 based in Kingswood, Bristol, owned by the Douglas family, and especially known for its horizontally opposed twin cylinder engined bikes and as manufacturers of speedway machines. The company also built a range of cars between 1913 and 1922.
Martinsyde was a British aircraft and motorcycle manufacturer between 1908 and 1922, when it was forced into liquidation by a factory fire.
Blackburne was a trade name of Burney and Blackburne Limited a British manufacturer of motorcycles from 1913 to 1922 at Tongham near Farnham, Surrey. They were also a major supplier of engines to other motor cycle and light car makers and continued to make these until 1937. Burney and Blackburne also made small aircraft engines.
ABC motorcycles was a British motorcycle manufacturer established in 1914 by Ronald Charteris in London. Several British motorcycle firms started up with the name "ABC", including Sopwith. The All British Engine Company Ltd. of London was founded in 1912 and later changed to ABC Motors Ltd. With chief engineer Granville Bradshaw, Charteris built a range of engines throughout the First World War. From 1913 ABC produced motorcycle engines.
The Dominator is a twin cylinder motorcycle developed by Norton to compete against the Triumph Speed Twin. The original Dominator was designed in 1947 and 1948 by Bert Hopwood, who had been on the Speed Twin design team at Triumph. Available for sale from mid 1949, this design set the pattern for Norton twins for the next 30 years.
The BSA M20 was a British motorcycle made by Birmingham Small Arms Company (BSA) at their factory in Small Heath, Birmingham. Although initially viewed as a near failure by the War Office in 1936, the M20 evolved into one of the longest serving motorcycles in the history of British military motorcycling, as well as becoming the most numerous type produced for World War II with 126,000 in active service. Many are still in use around the world today.
Quadrant was one of the earliest British motorcycle manufacturers, established in Birmingham in 1901. Famous for their big singles, Quadrant pioneered many innovations that proved important for motorcycle development but struggled after the First World War and the company was wound up in 1928.
The Ruby Cycle Co Ltd. was a British motorcycle manufacturer based in Ancoats Manchester. Founded in 1909 the factory produced a range of motorcycles under the Royal Ruby brand until 1932.
The BSA Model E was a British V-twin motorcycle manufactured by Birmingham Small Arms Company (BSA) at their factory in Armoury Road, Small Heath, Birmingham from 1919. It was often used with the matching BSA sidecar.
BSA motorcycles were made by the Birmingham Small Arms Company Limited (BSA), which was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.