![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these template messages)
|
P-1 Explorer | |
---|---|
![]() | |
Role | aerial photography and survey aircraft |
National origin | United States |
Manufacturer | Abrams Aircraft Corporation |
Designer | Talbert Abrams |
First flight | November 1937 |
Number built | 1 |
The Abrams P-1 Explorer was American purpose-designed aerial photography and survey aircraft that first flew in November 1937.
The Explorer was designed by aerial survey pioneer Talbert Abrams, to meet his needs for a stable aircraft with excellent visibility for his work. Abrams was an early aerial photographer in World War I. He used a Curtiss Jenny post-war, forming ABC airlines. In 1923, Abrams founded Abrams Aerial Survey Company and in 1937, Abrams Aircraft Corporation to build the specialized P-1 aircraft. [1]
The standard single front-engined airplane of this era had many drawbacks for carrying out scientific photography. They were created to be nimble in the air rather than stable photographic platforms. Their engines leaked oil which would then flow under the aircraft and affect the camera lens. Finally, the loud engines made cockpit conversation difficult.
Abrams designed an aircraft with a rear engine to keep the camera apertures clean and reduce cockpit noise, and used a delta type wing to facilitate side vision. He hired engineers Kenneth Ronan and Andrew Edward Kunzl, in Marshall, Michigan, who drew plans and began construction in the former Page Brothers Buggy Company factory.
Ronan and Kunzl operated an aeronautical repair station at the Marshall airfield. Planning and construction took ten months, and resulted in an airplane designed for more efficient and economical aerial photography.
To create the clear nose so the pilot had an unobstructed view, Abrams hired the German company Rohm and Haas, creators of Plexiglas. With a wooden model of each window pane, the Plexiglas was clamped in a frame similar to a window frame. Heated until it began to sag, it was then pushed down by two workers holding the frame until it was molded to the wooden model.
The Plexiglas could then be trimmed and mounted in the frame work. When the Explorer came back for restoration, the panels which had been heated were as clear as when new, though were destroyed due to abuse during disassembly.
The Explorer was a low-wing aluminium monoplane with twin booms and a central nacelle for the pilot and camera equipment. The pod's nose section was extensively glazed in Plexiglas. The undercarriage was fixed and of tricycle configuration.
Originally powered with a 330 hp (250 kW) engine and a two-bladed propeller, it was sent back to Ronan & Kunzul to increase the horsepower to 450. This change required braces to be added from the wing top to the fuselage and they added a three-bladed propeller, with Abrams hoping the increased power would attract a buyer.
World War II interrupted Abrams's work, and the single aircraft built was put into storage for the duration of the war. Obsolete by the end of the conflict, it was donated to the US National Air and Space Museum in 1948, where it remains today [update] awaiting restoration.
The P-1 was flown with a variety of camera gear. The Abrams Instrument Corporation C-3 camera was used to produce 650 nine by nine inch photos per flight. [2]
In 1968, a group of aviation enthusiasts began a project to restore the Explorer, including Jim Linn, who worked at Abrams Aerial Survey, Ron Dietz, a student pilot and engineer at Oldsmobile Division of General Motors, and Ellis Hammond, President of the Michigan Aerospace Educational Association. They worked with Don Lopez, the Assistant Director of the Smithsonian's National Air and Space Museum to release the aircraft, and in January 1975 the Explorer was transported in a Michigan National Guard Lockheed C-130 Hercules to the Capital City Airport in Lansing, Michigan.
The aircraft was moved to a state-owned hangar, where Dietz carried out careful photography before any disassembly was done, as well as detailed tracings of all the lettering so it could be recreated accurately at the end of the project.
The wings were sent to Montcalm Community College, where they were stripped, cleaned, repainted and recovered with silver painted fabric. The instruments panels and controls were disassembled and restored by Dietz's colleagues at Oldsmobile.
The aircraft was physically moved to the Lansing Community College aviation program. However, the restoration attempt was never completed; in 1981, the Lansing Community College truck driving school returned the plane to the Paul E. Garber Preservation, Restoration, and Storage Facility of the Smithsonian, where it remains.
Data from Jane's all the World's Aircraft 1938 [3]
General characteristics
Performance
Related lists
The Focke-Wulf Fw 189 Uhu is a German twin-engine, twin-boom, three-seat tactical reconnaissance and army cooperation aircraft. It first flew in 1938, entered service in 1940 and was produced until mid-1944.
The Abrams Air Craft Corporation was an aircraft manufacturer established in Lansing, Michigan, USA, in 1937 as an offshoot of Talbert Abrams' Aerial Survey Corporation. Abrams had founded an airline in 1929 but found himself increasingly interested in aerial photography. The new company was created for the purpose of designing and producing a dedicated survey aircraft. The result was the P-1 Explorer, designed by Abrams with assistance from Kenneth Ronan of Ronan & Kunzl.
The RWD-10 was a Polish aerobatics sports plane, single-seat parasol wing monoplane, used from 1933 to 1939 and constructed by the RWD team.
The Aviat Husky is a tandem two-seat, high-wing, utility light aircraft built by Aviat Aircraft of Afton, Wyoming.
The Farman F 400 was a 1930s French three-seat cabin high-winged monoplane which was designed and built by Farman.
The RWD 9 was a Polish sports plane of 1934, constructed by the RWD team.
The PWS-24 was a Polish single-engine passenger aircraft for 4 passengers, built in PWS factory, used from 1933 to 1936 by LOT Polish Airlines. In spite of its limited capacity, it was the only series-built airliner of domestic design ever used by the LOT.
The PZL.44 Wicher (gale) was a prototype of 14-seat, twin-engine Polish airliner, built in the Państwowe Zakłady Lotnicze (PZL) in 1938. It was to compete with the DC-2 and Lockheed Super Electra.
The BAT F.K.23 Bantam was a British single-seat fighter biplane produced by British Aerial Transport Company Limited of London during World War I.
The Meyers OTW was a 1930s United States training biplane designed by Allen Meyers and built by his Meyers Aircraft Company from 1936 to 1944.
The AeroVironment FQM-151 Pointer is a small UAV used by the United States Army and Marine Corps for battlefield surveillance. It was designed by AeroVironment Incorporated, which is run by Paul MacCready, noted for such pioneering aircraft as the human-powered Gossamer Condor and a robotic flying pterodactyl replica. The Pointer was developed with company funds, with the US Army and Marine Corps obtaining a total of about 50 beginning in 1990.
The Potez 32 and its military version the Potez 33 was a single-engine French monoplane transport built by Potez and based on the Potez 29 biplane.
The Tupolev ANT-16 was an experimental heavy bomber aircraft designed and tested in the Soviet Union in the early 1930s.
The Siebel Si 202 Hummel ("Bumble-bee") was a German light sportsplane of the late 1930s. It was an angular low-wing monoplane, which could be powered by a variety of small engines.
The InterPlane Skyboy is a two-seat, side-by-side, high wing, single engine, pusher configuration ultralight aircraft that was manufactured as a completed aircraft by InterPlane Aircraft of Zbraslavice, Czech Republic.
The PWS-4 was a prototype Polish sports aircraft, developed in 1928 by Podlaska Wytwórnia Samolotów.
The Kinetic Mountain Goat is an American two-seat cabin monoplane, designed by Bill Montagne for his company Kinetic Aviation.
The Comte AC-11-V was a 1930s Swiss three-seat cabin monoplane produced by Flugzeugbau A. Comte for aerial photography and mapping. The AC-11-V was a high-wing monoplane with a taikskid-conventional landing gear and powered by a 220 hp (164 kW) Armstrong Siddeley Lynx radial engine.
The Historical Ryan STA was an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft was an 85% scale replica of the original Ryan STA and when it was available was supplied as a kit for amateur construction.
The Aerial Service Mercury Senior, Aerial Mercury Senior or just Mercury Senior was a US biplane mailplane designed to operate at night between New York City and Chicago. A different, smaller, lower wing improved its performance for daytime flights. One was built and used by the United States Post Office Department.
![]() | Wikimedia Commons has media related to Abrams P-1 Explorer . |