Access level

Last updated

In computer science and computer programming, access level denotes the set of permissions or restrictions provided to a data type. Reducing access level is an effective method for limiting failure modes, reducing debugging time, and simplifying overall system complexity. It restricts variable modification to only the methods defined within the interface to the class. Thus, it is incorporated into many fundamental software design patterns. In general, a given object cannot be created, read, updated or deleted by any function without having a sufficient access level.

The two most common access levels are public and private, which denote, respectively; permission across the entire program scope, or permission only within the corresponding class. A third, protected, extends permissions to all subclasses of the corresponding class. Access levels modifiers are commonly used in Java [1] as well as C#, which further provides the internal level. [2] In C++, the only difference between a struct and a class is the default access level, which is private for classes and public for structs. [3]

To illustrate the benefit: consider a public variable which can be accessed from any part of a program. If an error occurs, the culprit could be within any portion of the program, including various sub-dependencies. In a large code base, this leads to thousands of potential sources. Alternatively, consider a private variable. Due to access restrictions, all modifications to its value must occur via functions defined within the class. Therefore, the error is structurally contained within the class. There is often only a single source file for each class, which means debugging only requires evaluation of a single file. With sufficient modularity and minimal access level, large code bases can avoid many challenges associated with complexity. [4]

Example: Bank Balance Class

Retrieved from Java Coffee Break Q&A [5] 

public class bank_balance {  public String owner;  private int balance;    public bank_balance( String name, int dollars )  {   owner = name;    if (dollars >= 0)    balance = dollars;   else    dollars =0;  }   public int getBalance()  {   return balance;  }   public void setBalance(int dollars)  {   if (dollars >= 0)    balance = dollars;   else    dollars = 0;    } }

Here, the imperative variable balance is defined as a private int. This ensures other classes, methods and functions cannot accidentally overwrite the variable balance. Instead, they must access the interface for the class bank_balance, whose methods ensure the balance cannot drop below 0.

Related Research Articles

In object-oriented programming, a class defines the shared aspects of objects created from the class. The capabilities of a class differ between programming languages, but generally the shared aspects consist of state (variables) and behavior (methods) that are each either associated with a particular object or with all objects of that class.

In multi-threaded computer programming, a function is thread-safe when it can be invoked or accessed concurrently by multiple threads without causing unexpected behavior, race conditions, or data corruption. As in the multi-threaded context where a program executes several threads simultaneously in a shared address space and each of those threads has access to every other thread's memory, thread-safe functions need to ensure that all those threads behave properly and fulfill their design specifications without unintended interaction.

In programming languages, a closure, also lexical closure or function closure, is a technique for implementing lexically scoped name binding in a language with first-class functions. Operationally, a closure is a record storing a function together with an environment. The environment is a mapping associating each free variable of the function with the value or reference to which the name was bound when the closure was created. Unlike a plain function, a closure allows the function to access those captured variables through the closure's copies of their values or references, even when the function is invoked outside their scope.

In class-based, object-oriented programming, an instance variable is a variable defined in a class, for which each instantiated object of the class has a separate copy, or instance. An instance variable has similarities with a class variable, but is non-static. An instance variable is a variable which is declared in a class but outside of constructors, methods, or blocks. Instance variables are created when an object is instantiated, and are accessible to all the constructors, methods, or blocks in the class. Access modifiers can be given to the instance variable.

In class-based, object-oriented programming, a class variable is a variable defined in a class of which a single copy exists, regardless of how many instances of the class exist.

In object-oriented (OO) and functional programming, an immutable object is an object whose state cannot be modified after it is created. This is in contrast to a mutable object, which can be modified after it is created. In some cases, an object is considered immutable even if some internally used attributes change, but the object's state appears unchanging from an external point of view. For example, an object that uses memoization to cache the results of expensive computations could still be considered an immutable object.

In software systems, encapsulation refers to the bundling of data with the mechanisms or methods that operate on the data. It may also refer to the limiting of direct access to some of that data, such as an object's components. Essentially, encapsulation prevents external code from being concerned with the internal workings of an object.

A method in object-oriented programming (OOP) is a procedure associated with an object, and generally also a message. An object consists of state data and behavior; these compose an interface, which specifies how the object may be used. A method is a behavior of an object parametrized by a user.

In object-oriented programming such as is often used in C++ and Object Pascal, a virtual function or virtual method is an inheritable and overridable function or method that is dispatched dynamically. Virtual functions are an important part of (runtime) polymorphism in object-oriented programming (OOP). They allow for the execution of target functions that were not precisely identified at compile time.

This article compares two programming languages: C# with Java. While the focus of this article is mainly the languages and their features, such a comparison will necessarily also consider some features of platforms and libraries.

<span class="mw-page-title-main">Java syntax</span> Set of rules defining correctly structured program

The syntax of Java is the set of rules defining how a Java program is written and interpreted.

In computer science, a mutator method is a method used to control changes to a variable. They are also widely known as setter methods. Often a setter is accompanied by a getter, which returns the value of the private member variable. They are also known collectively as accessors.

In computer programming, an entry point is the place in a program where the execution of a program begins, and where the program has access to command line arguments.

SystemVerilog, standardized as IEEE 1800, is a hardware description and hardware verification language used to model, design, simulate, test and implement electronic systems. SystemVerilog is based on Verilog and some extensions, and since 2008, Verilog is now part of the same IEEE standard. It is commonly used in the semiconductor and electronic design industry as an evolution of Verilog.

The Java Modeling Language (JML) is a specification language for Java programs, using Hoare style pre- and postconditions and invariants, that follows the design by contract paradigm. Specifications are written as Java annotation comments to the source files, which hence can be compiled with any Java compiler.

A class in C++ is a user-defined type or data structure declared with any of the keywords class, struct or union that has data and functions as its members whose access is governed by the three access specifiers private, protected or public. By default access to members of a C++ class declared with the keyword class is private. The private members are not accessible outside the class; they can be accessed only through member functions of the class. The public members form an interface to the class and are accessible outside the class.

A property, in some object-oriented programming languages, is a special sort of class member, intermediate in functionality between a field and a method. The syntax for reading and writing of properties is like for fields, but property reads and writes are (usually) translated to 'getter' and 'setter' method calls. The field-like syntax is easier to read and write than many method calls, yet the interposition of method calls "under the hood" allows for data validation, active updating, or implementation of what may be called "read-only fields".

This article describes the syntax of the C# programming language. The features described are compatible with .NET Framework and Mono.

Access modifiers are keywords in object-oriented languages that set the accessibility of classes, methods, and other members. Access modifiers are a specific part of programming language syntax used to facilitate the encapsulation of components.

References

  1. ↑ "Controlling Access to Members of a Class (The Java Tutorials > Learning the Java Language > Classes and Objects)". docs.oracle.com. Retrieved 2016-11-22.
  2. ↑ "Access Modifiers (C# Reference)". msdn.microsoft.com. Retrieved 2016-11-22.
  3. ↑ "Friendship and inheritance - C++ Tutorials". www.cplusplus.com. Retrieved 2016-11-23.
  4. ↑ "Why do we need private variables?". softwareengineering.stackexchange.com. Retrieved 2016-11-22.
  5. ↑ "Q&A : What is the difference between public, private, and protected variables?".
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.