Aerodyne Systems Vector

Last updated

Vector
Aerodyne Vector 610 'LN-YAC' (42353104390).jpg
Aerodyne Vector 610 at Flyhistorisk Museum, Sola
Role Ultralight aircraft
National origin United States
Manufacturer Aerodyne Systems
Introduction1982
StatusProduction completed
Developed from Hill Humbug
Variants Ultralight Flight Mirage

The Aerodyne Systems Vector is a family of American ultralight aircraft that was designed by Berndt Petterson, Mike McCarron and Paul Yarnell and produced by Aerodyne Systems, introduced in 1982. The aircraft was supplied as a kit for amateur construction. [1] [2]

Contents

Design and development

The Vector owes many of its design concepts to the earlier Hill Humbug and was later to inspire and influence the Ultralight Flight Mirage. [1] [2]

The Vector was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 195 lb (88 kg). It features a cable-braced high-wing, V-tail, a single-seat, open cockpit, tricycle landing gear and a single engine in pusher configuration. [1] [2]

The aircraft is made from bolted-together aluminum tubing, with its flying surfaces covered in Dacron sailcloth. Its 80% double-surface 35.2 ft (10.7 m) span wing is supported by cables running from an inverted "V" kingpost. The landing gear's nose wheel is not steerable and a small tail caster is provided. The pilot is accommodated on an open seat, without a windshield. The engine is mounted at the wing's leading edge and powers the trailing edge-mounted pusher propeller through an extension shaft. [1] [2]

The Vector series was very popular in its day and a great number were produced. [1]

Variants

Vector 600
Initial model, with a two-axis control system, powered by two 9 hp (7 kW) Chrysler engines. [1]
Vector 610
Improved model, with a structurally strengthened airframe, enlarged spoilers, elliptical wing tip extensions and powered by a single 22 hp (16 kW) Zenoah G-25B single cylinder, two-stroke engine. [1]
Vector 627
Powered by a single 28 hp (21 kW) single cylinder, two-stroke Rotax 277 engine. [1]
Vector 627 SR
Powered by a single 35 hp (26 kW) single cylinder, two-stroke Rotax 377 engine. [1]

Specifications (Vector 610)

Data from Cliche and the Virtual Ultralight Museum [1] [2]

General characteristics

Performance

Related Research Articles

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

The Zenoah G-25 is a single cylinder, two stroke, carburetted aircraft engine, with optional fuel injection, designed for use on ultralight aircraft

<span class="mw-page-title-main">AmeriPlanes Mitchell Wing A-10</span> Type of aircraft

The Mitchell Wing A-10 and T-10 are a family of American cantilever, tricycle landing gear, high-wing, pusher configuration, one and two seat ultralight aircraft designed for amateur construction or supplied as completed aircraft. The aircraft were designed by Don Mitchell and were produced by a number of companies, the last being AmeriPlanes of Truro, Iowa.

The US Aviation Cloud Dancer is an American ultralight motorglider that was designed by Erwin Rodger and Roger Delura and produced by US Aviation. The aircraft was supplied as a kit for amateur construction.

The Striplin Lone Ranger is a family of American ultralight aircraft that was designed by Ken Striplin. The aircraft was supplied as a kit for amateur construction.

The Mariner Aircraft Mariner is an American ultralight amphibious flying boat that was designed by Larry Seifert and produced by Mariner Aircraft, starting in 1989. The aircraft was supplied as a kit for amateur construction.

The Ultralight Flight Mirage is an American ultralight aircraft that was designed by Frank Riley and produced by Ultralight Flight Inc. The aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Ritz Model A</span> American ultralight aircraft

The Ritz Model A is an American ultralight aircraft that was designed by Gerry Ritz in 1984 and supplied in the form of plans for amateur construction.

The V-STOL Solution is an American ultralight aircraft that was designed by Dick Turner in 1998 and produced by V-STOL Aircraft. The aircraft was supplied as a kit for amateur construction.

The Greenwood Witch is an American ultralight aircraft that was designed and produced by Marvin Greenwood. The aircraft was supplied as a kit for amateur construction.

The Mountaineer Trikes Mite-Lite is a family of American flying wing ultralight trikes that was designed and produced by Mountaineer Trikes. The aircraft were supplied as a kit for amateur construction.

The Cosmos Samba, named after the dance of the same name, is a French ultralight trike that is produced by Cosmos ULM of Fontaine-lès-Dijon, France. The aircraft is supplied as a complete aircraft and is not available as a kit.

The Fletcher Hercules is an American two-seat ultralight trike that was designed by AW Harrison and produced by Fletcher's Ultralights of Turlock, California, in the late 1990s and early 2000s. The aircraft was supplied as a kit for amateur construction and was also available as a completed aircraft.

The LiteWing Aircraft LiteTrike, also called The Lite Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied fully assembled.

The LiteWing Aircraft LiteWing, also called the Lite Wing Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">North Wing Maverick</span> American ultralight trike aircraft

The North Wing Maverick is an American single-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

<span class="mw-page-title-main">Sabre 340</span> American ultralight trike

The Sabre 340 is an American ultralight trike that was designed and produced by Sabre Aircraft of Buckeye, Arizona. The aircraft was supplied fully assembled.

The Tennessee Propellers Scout is an American powered parachute that was designed and produced by Tennessee Propellers of Normandy, Tennessee. The aircraft was introduced in 1999, but is no longer available.

The Paramotor Inc FX series is a family of American paramotors that was designed and produced by Paramotor Inc of Weldon Spring, Missouri for powered paragliding.

The Fly Hard Trikes SkyCycle is an American ultralight trike, designed by Mike Theeke and produced by Fly Hard Trikes of Wildwood, Georgia. The aircraft is supplied as a complete ready-to-fly-aircraft and several hundred have been completed and flown.

References

  1. 1 2 3 4 5 6 7 8 9 10 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-42. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 3 4 5 Virtual Ultralight Museum (n.d.). "Vector 600" . Retrieved 3 January 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.