A3C | |
---|---|
Role | Autogyro |
National origin | France |
Manufacturer | Air Copter |
Status | In production (2011) |
The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction. [1]
The A3C was designed to comply with amateur-built aircraft rules. It features a single main rotor, a two-seat side-by-side configuration enclosed cockpit with a windshield, tricycle landing gear and a four-cylinder, air and liquid-cooled, four-stroke, dual-ignition, turbocharged 115 hp (86 kW) Rotax 914 or a normally-aspirated 100 hp (75 kW) Rotax 912S engine mounted in pusher configuration. [1]
Air Copter is well known as a designer and manufacturer of gyroplane rotor blades and other dynamic components and they also make their own components for the A3C. The aircraft's 8.40 m (27.6 ft) diameter rotor has a chord of 20 cm (7.9 in) and employs a NACA 8H12 airfoil. The main rotor has a pre-rotator to shorten take-off distance. The aircraft has an empty weight of 250 kg (550 lb) and a gross weight of 450 kg (990 lb), giving a useful load of 200 kg (440 lb). [1] [2]
Data from Bayerl [1]
General characteristics
Performance
The AutoGyro Calidus is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Celier Kiss is a series of Polish autogyros that was designed by Frenchman Raphael Celier and produced by his company, Celier Aviation of Jaktorów-Kolonia, Poland. When it was available the aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Celier Xenon 2 is a series of Polish autogyros that was designed by Frenchman Raphael Celier and produced by his company, Celier Aviation of Piotrków Trybunalski, Poland. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Airbet Girabet is a family of Spanish autogyros, designed and produced by Airbet of Barcelona. They are all supplied as complete ready-to-fly-aircraft.
The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Bauer BAD-12 Gyrotrainer is a Czech autogyro, designed and produced by Bauer Avion of Prague. The aircraft is supplied as a complete ready-to-fly-aircraft.
The ELA 07 is a series of Spanish autogyros, designed and produced by ELA Aviación of Córdoba, Andalusia. The aircraft are supplied complete and ready to fly.
The ArrowCopter is a series of Austrian autogyros, designed and produced by FD-Composites GmbH of Zeillern. When it was in production the ArrowCopter AC20 series was supplied as complete, factory built, ready-to-fly-aircraft.
The Magni M-14 Scout is an Italian autogyro, designed and produced by Magni Gyro srl of Besnate. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Pagotto Brakogyro is a series of Italian autogyros, designed by Enio Pagotto and produced by Carpenterie Pagotto of Pianzano. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Phenix Aviation Phenix is a Spanish autogyro, under development by Phenix Aviation of Alicante. The aircraft is intended to be supplied as a complete ready-to-fly-aircraft.
The Trixy G 4-2 R is an Austrian autogyro, designed and produced by Trixy Aviation Products of Dornbirn. The aircraft was introduced at the Aero show held in Friedrichshafen in 2011 and when it was available it was supplied as a complete ready-to-fly-aircraft.
The Dynali H2S is a Belgian helicopter, designed by Jacky Tonet and produced by Dynali of the Thines district of Nivelles. When it was available the aircraft was supplied as a kit for amateur construction or fully assembled, supplied ready-to-fly.
The ELA Aviation ELA 10 Eclipse is a Spanish, two-seat, enclosed autogyro, designed and built by ELA Aviación of Córdoba, Andalusia. It was introduced at the AERO Friedrichshafen airshow in 2014. The aircraft is supplied complete and ready-to-fly.
The Aero East Europe Sila is a family of Serbian ultralight and light aircraft, designed and produced by Aero East Europe of Kraljevo and later of Jagodina, introduced at the AERO Friedrichshafen show in 2013. The design is supplied complete and ready-to-fly.
The Aviomania G2SA Genesis Duo is a Cypriot autogyro designed in 2007 by Nicolas Karaolides and produced by Aviomania of Larnaca. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The DTA J-RO (transl. gyro) is a French autogyro designed and produced by DTA sarl of Montélimar. The aircraft is supplied complete and ready-to-fly.
The SkyCruiser Autogyro SkyCruiser is a series of Hungarian autogyros designed and produced by SkyCruiser Autogyro KFT of Inárcs. It was publicly introduced at the AERO Friedrichshafen airshow in 2014. The aircraft is supplied complete and ready-to-fly.
The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.
The Dynali H3 EasyFlyer, now known as the Sport, is a Belgian helicopter designed and produced by the Dynali of the Thines district of Nivelles. The aircraft is supplied complete and ready-to-fly-aircraft or as a kit for amateur construction.