The Albert shako (also known as the Albert pot) [1] was an item of headgear worn in the British Army between 1844 and 1855. It was a development of the Albert hat proposed by Prince Albert in 1843 as a replacement for the bell-top shako then in use. The Albert hat was 7+1⁄10 inches (18 cm) tall, 7⁄10 inch (1.8 cm) taller than the bell-top shako, and had a brim all around rather than just a peak to provide better protection from the sun. The hat included innovative ventilation features.
The hat was ridiculed in the press when it was unveiled on 21 September 1843. The Duke of Wellington, who was then Commander-in-Chief of the British Army, made alterations to the hat. His version, which became known as the Albert shako, had a brim only at the front and rear. It entered into service the following year replacing the bell-top shako of the line infantry, light dragoons and Corps of Royal Sappers and Miners. The shako was also worn by fusilier regiments and grenadier companies, who had previously worn a bearskin hat. The Albert shako was regarded as heavy and uncomfortable and was often replaced by a forage cap on active service. It was replaced in 1855 by the French pattern shako.
The Albert hat was developed and partly designed by Albert, Prince Consort in 1843 as part of his campaign to modernise the uniform of the British Army, which he considered unpractical when compared to that worn by the Royal Navy. It was one of Albert's earliest involvements with the British Army, of which he had been appointed a field marshal in 1840 when he married Queen Victoria. [2] [3] The army had worn the 6+4⁄10-inch-tall (16 cm) bell-top shako since 1829. [4] [5] The Albert hat was 7+1⁄10 inches (18 cm) tall. While the bell-top shako had a brim only at the front the Albert hat had a 2+5⁄8-inch (6.7 cm) brim all round, intended to provide protection from the sun. [6] [7] It was this continuous brim that made the headgear a hat, rather than a shako. [5]
While the bell-top shako was wider at the top than at the bottom the Albert hat tapered inwards, measuring 6+1⁄4 inches (16 cm) in diameter at the top. [7] A ball at the front of the top of the hat played a similar role to the plumes on earlier shakoes; a ball had been used with the bell-top shako since 1835. [7] [8] Albert considered that previous shakoes had made the wearer's head hot, to the detriment of performance. He therefore introduced ventilation to his hat, which was a radical idea in this period. [6] Two brass tiger heads on either side concealed ventilation holes while a further flap was incorporated, to be opened in hot climates. [5] The hat was covered in black cloth, with a band of white worsted material around the bottom, and the brim was black leather. A shako plate was affixed to the front of the hat consisting of a royal crown above a Maltese cross marked with the regiment's number. [5]
Some surviving examples bear the regimental number "I", it is likely this is just an example number rather than intended for issue to the 1st Regiment of Foot (Royal Scots) who were away on foreign service at the time. [6] There is little evidence that the hat was produced in any great quantity, though a number may have been trialled by the 49th (Princess Charlotte of Wales's) (Hertfordshire) Regiment of Foot, newly returned from service in Hong Kong. [9] Because of its limited issue the hat is rarer than its successor, the Albert shako, or the Albert helmet that was developed for the heavy cavalry. [7] A surviving Albert hat is held in the collection of the National Army Museum. [9]
Albert formally unveiled the hat on 21 September 1843. [7] The hat was mocked in a Punch cartoon and in October the Illustrated London News said "public opinion has been so unequivocally expressed against it, that it is not likely to prove a popular substitution for the cap now in wear". [5] [2]
In October 1843 the Duke of Wellington, who was Commander-in-Chief of the British Army, made alterations to the hat proposed by Albert. This included shortening it by 3 inches (7.6 cm), reducing the brim to a peak at the front and rear only and replacing the cross-shaped shako plate with one based on a star for line infantry regiments (and various designs for other units). [7] [9] Because the brim had been altered the new design became known as the Albert shako. [9]
The public response to the proposed shako was generally negative, it being considered similar to the caps worn by Hessians and other German soldiers since the 16th century. [5] By 20 December a new modified design was proposed, with the height increased to 6+3⁄4 inches (17 cm) and the brass tigers omitted and a chin strap introduced. This height was similar to that of the stovepipe shako, in use in the British Army from around 1800. [10] [9] The final design was similar to the shako then worn by the Austrian army. [11] Prototype examples of the new shako were produced by Lock and Company of St James's Street by the end of the year. [9]
The officers' shako was made of black beaver on a felt base. The top, bottom edge and brims were of black lacquered leather. The front peak extended to 2+3⁄8 inches (6.0 cm) and the rear peak to 1+1⁄4 inches (3.2 cm). The hat tapered slightly, measuring 1⁄4 inch (0.64 cm) less in diameter at the top than at its base. The chin strap was of leather over which a gilt chain was worn, affixed to the side of the shako with gilt rosettes. [10] The other ranks' shako was the same as the officers' except that it was made of napped felt (and was therefore somewhat heavier) and the metal adornments were in brass rather than gilt. [12]
A waterproof cover was issued with the shako, for use in bad weather. [12]
Regulations specified that the shako plate for officers was to be in gilt, though examples with silver details are known for some regiments. The plate for officers of line infantry regiments is usually in the shape of an eight-pointed star, though some regiments used plates with 10 and 12 points, surmounted with a crown. Within this was a wreath of laurel and palm leaves and a garter which usually carried the name of the regiment, but sometimes its motto instead. The centre carried the regimental number. Battle honours were listed in the rays of the star. [13] The shako plate of the other ranks was made from bronze and simpler in design. It was circular, surmounted by a crown, with the regimental number within a wreath. [12]
Light companies (and light infantry regiments) were distinguished with a bugle in the centre of the plate, grenadier companies with a grenade. Fusilier regiments wore a grenade-shaped shako plate, rifle regiments one in bronze shaped like a bugle. [13]
The ball-shaped plume (sometimes called a tuft) was retained from earlier shakos and the Albert hat. [13] [7] The ball was made of worsted and measured 2+1⁄2 inches (6.4 cm) in diameter. It was attached to the helmet by a metal mounting. [13]
The colour of the plume varied to denote different roles. The line infantry wore red with a white tuft; light infantry regiments and the light companies of the line infantry wore green with a white tuft; fusilier regiments, the grenadier companies of line infantry regiments and the Royal Marines wore plain white and rifle regiments wore green with a black tuft. Regimental staff officers wore a plain red plume and field officers wore a red horsehair plume instead of the ball. [7]
The Albert shako entered service in 1844, replacing the bell-top shako of the infantry regiments and the bearskins of the fusiliers and grenadier companies. [14] The Foot Guards retained their bearskins and Highland regiments their feather bonnets. [15] The light dragoon regiments and the Corps of Royal Sappers and Miners were also issued with the Albert shako. [16] [11] The hussar regiments and Royal Horse Artillery, who had previously worn the bell top shako, were ordered to wear a new hussar busby. [17] The hussars found the busby too hot for service in India and the shako was permitted to be worn there with a white cotton cover that also helped protect the neck. The plain black shako was also worn occasionally in full dress uniform. In some regiments, such as the 10th Hussars the shako was decorated with gilt circlets around the top for officers and yellow lace for the other ranks. The 10th wore the shako with a black horsehair plume. [18]
Soldiers complained that the Albert shako was heavy and uncomfortable. [6] The shako was liable to fall off in action, one account recalls that the battlefield of Chillianwala in 1849 was littered with discarded shakoes. [19] The shako saw use in the Crimean War (1853–1856), one of its last uses in the field as it was replaced in 1855. [20] The shako was generally only worn in the earlier battles of the war such as Alma and Inkerman, being replaced by the round forage cap in later actions. [12] Colonel George Bell of the 1st Regiment of Foot (Royal Scots) complained in 1854: "The next thing I want to pitch aside is the abominable Albert, as it is called, whereon a man may fry his ration beef at mid-day in this climate, the top being patent leather to attract a 10 fold more portion of the sun's rays to madden his brain". [21]
The Albert shako's formal replacement was the 1855 French pattern shako, introduced as part of reforms that year that reduced the amount of decorative details on British Army uniforms. The French pattern shako was shorter and is sometimes described as a kepi. [22] It is not known if the reduction in size was to improve comfort or just in imitation of the headgear then worn by the French army. [16] The ball-shaped plumes of the Albert shako were retained on the new headgear. [23] The Albert shako was retained by the Sappers and Miners until 1857, when they were issued with busbies. [11] The shako continued in service in the yeomanry long after it had been replaced in the regular forces. Yeomanry officers often wore the shako with feather plumes and their men with horsehair plumes rather than the ball plumes mandated for the regulars. [24]
The Pickelhaube, also Pickelhelm, is a spiked leather or metal helmet that was worn in the 19th and 20th centuries by Prussian and German soldiers of all ranks, as well as firefighters and police. Although it is typically associated with the Prussian Army, which adopted it in 1842–43, the helmet was widely imitated by other armies during that period. It is still worn today as part of ceremonial wear in the militaries of certain countries, such as Sweden, Chile, and Colombia.
A slouch hat is a wide-brimmed felt or cloth hat most commonly worn as part of a military uniform, often, although not always, with a chinstrap. It has been worn by military personnel from many different nations including Australia, Ireland, the United Kingdom, Canada, India, New Zealand, Southern Rhodesia, France, the United States, the Confederate States, Germany and many others. Australia and New Zealand have had various models of slouch hat as standard issue headwear since the late Victorian period.
The kepi is a cap with a flat circular top and a peak, or visor. In English, the term is a loanword from French: képi, itself a re-spelled version of the Alemannic German: Käppi, a diminutive form of Kappe, meaning 'cap'. In Europe, the kepi is most commonly associated with French military and police uniforms, though versions of it were widely worn by other armies during the late 19th and early 20th centuries. In North America, it is usually associated with the American Civil War, as it was worn by soldiers on both sides of the conflict.
A military uniform is a standardised dress worn by members of the armed forces and paramilitaries of various nations.
A bearskin is a tall fur cap derived from mitre caps worn by grenadier units in the 17th and 18th centuries. Initially worn by only grenadiers, bearskins were later used by several other military units in the 19th century. The bearskin cap continued to see use in battle during the mid-19th century, although by the 20th century, it was only used for parade dress. In the 21st century, the bearskin cap is retained by select military units as a prominent element of their ceremonial and full dress uniforms.
Lützow Free Corps was a volunteer force of the Prussian army during the Napoleonic Wars. It was named after its commander, Ludwig Adolf Wilhelm von Lützow. The Corpsmen were also widely known as the “Lützower Jäger“ or “Schwarze Jäger“, sometimes also "Lützower Reiter".
The pith helmet, also known as the safari helmet, salacot, sola topee, sun helmet, topee, and topi is a lightweight cloth-covered helmet made of sholapith. The pith helmet originates from the Spanish military adaptation of the native salakot headgear of the Philippines.
Busby is the English name for the Hungarian prémes csákó or kucsma, a military head-dress made of fur, originally worn by Hungarian hussars. In its original Hungarian form the busby was a cylindrical fur cap, having a bag of coloured cloth hanging from the top. This bag could be filled with sand and the end attached to the right shoulder as a defence against sabre cuts.
A side cap is a military cap that can be folded flat when not being worn. It is also known as a garrison cap or flight cap in the United States, wedge cap in Canada, or field service cap in the United Kingdom; or in vulgar slang as a cunt cap or piss cutter. In form the side cap is comparable to the glengarry, a folding version of the Scottish military bonnet. It has been associated with various military forces since the middle of the 19th century, as well as various civilian organizations.
Czapka is a Polish, Belarusian, and Russian generic word for a cap. However, it is perhaps best known to English speakers as a word for the 19th-century Polish cavalry headgear, consisting of a high, four-pointed cap with regimental insignia on the front to which feathers or rosettes were sometimes added.
A shako is a tall, cylindrical military cap, usually with a visor, and sometimes tapered at the top. It is usually adorned with an ornamental plate or badge on the front, metallic or otherwise; and often has a feather, hackle, or pompom attached at the top.
Forage cap is the designation given to various types of military undress, fatigue or working headwear. These vary widely in form, according to country or period. The coloured peaked cap worn by the modern British Army for parade and other dress occasions is still officially designated as a forage cap.
Full dress uniform, also known as a ceremonial dress uniform or parade dress uniform, is the most formal type of uniforms used by military, police, fire and other public uniformed services for official parades, ceremonies, and receptions, including private ones such as marriages and funerals. Full dress uniforms typically include full-size orders and medals insignia. Styles tend to originate from 19th century uniforms, although the 20th century saw the adoption of mess dress-styled full-dress uniforms. Designs may depend on regiment or service branch. In Western dress codes, full dress uniform is a permitted supplementary alternative equivalent to the civilian white tie for evening wear or morning dress for day wear – sometimes collectively called full dress – although military uniforms are the same for day and evening wear. As such, full dress uniform is the most formal uniform, followed by the mess dress uniform.
The uniforms of La Grande Armée, the army of Napoleon I, are described in this article.
The uniforms of the British Army currently exist in twelve categories ranging from ceremonial uniforms to combat dress. Uniforms in the British Army are specific to the regiment to which a soldier belongs. Full dress presents the most differentiation between units, and there are fewer regimental distinctions between ceremonial dress, service dress, barrack dress and combat dress, though a level of regimental distinction runs throughout.
The Brunswick Ducal Field-Corps, commonly known as the Black Brunswickers, was a volunteer military unit raised by Frederick William, Duke of Brunswick-Wolfenbüttel during the Napoleonic Wars. The Duke was a strong opponent of Napoleon's occupation of German territory. Formed in 1809 when war broke out between the First French Empire and the Austrian Empire, the unit initially consisted of approximately 2,300 infantrymen and cavalrymen before incorporating a number of artillery troops.
The uniforms of the United States Army distinguish soldiers from other service members. U.S. Army uniform designs have historically been influenced by British and French military traditions, as well as contemporary U.S. civilian fashion trends. The two primary uniforms of the modern U.S. Army are the Army Combat Uniform, used in operational environments, and the Army Green Service Uniform, worn during everyday professional wear and during formal and ceremonial occasions that do not warrant the wear of the more formal blue service uniform.
The military uniforms of the Union Army in the American Civil War were widely varied and, due to limitations on supply of wool and other materials, based on availability and cost of materials. The ideal uniform was prescribed as a dark blue coat with lighter pants, with a black hat. Officer's ranks were denoted with increasing levels of golden decoration. Specific jobs, companies, and units had markedly different styles at times, often following European customs such as that of the Zouaves. Officers uniforms tended to be highly customized and would stray from Army standard. Ironically, several main pieces of gear had been created by order of the U.S. War Secretary Jefferson Davis before the war; he later became Confederate President.
This article deals with the rank insignia of the Austro-Hungarian Army, as worn by the Austro-Hungarian Army after the reorganisation in 1867 until 1918.
The Albert helmet is a type of dragoon helmet introduced by the British military in the 19th century. The helmet was developed by Prince Albert of Saxe-Coburg and Gotha in 1842, and was first introduced for service with the Household Cavalry in 1843. The helmet was introduced to other heavy cavalry units in the British Empire in 1847.