Amax Sport 1700

Last updated

Sport 1700
Role Homebuilt aircraft
National origin Australia
Manufacturer Amax Engineering
StatusProduction completed
Number builtat least one

The Amax Sport 1700 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. [1]

Contents

Design and development

The Sport 1700 features a strut-braced parasol wing, a two-seats-in-tandem open cockpit with a windshield, fixed conventional landing gear and a single engine in tractor configuration. [1]

The aircraft fuselage is made from welded 4130 steel tubing, while the wing is of wooden construction, with the whole aircraft covered in doped aircraft fabric. Its 33.00 ft (10.1 m) span wing has a wing area of 146.00 sq ft (13.564 m2) and are capable of folding for storage for ground transport. The acceptable power range is 85 to 110 hp (63 to 82 kW). [1]

The Sport 1700 has an empty weight of 600 lb (270 kg) and a gross weight of 1,300 lb (590 kg), giving a useful load of 700 lb (320 kg). With full fuel of 16 U.S. gallons (61 L; 13 imp gal) the payload is 604 lb (274 kg). [1]

The manufacturer estimates the construction time from the supplied kit as 500 hours. [1]

Specifications (Sport 1700)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The AeroLites AeroMaster AG is an American homebuilt agricultural aircraft, designed and produced by AeroLites of Welsh, Louisiana. The aircraft is supplied as a kit for amateur construction.

The Amax Vixen 105 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit for amateur construction.

The Associated Air Liberty 181 is an American homebuilt aircraft that was designed and produced by Associated Air of Woodland, Washington, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

The Bounsall Super Prospector is an American STOL homebuilt aircraft that was designed and produced by Bounsall Aircraft of Mesquite, Nevada, introduced in 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The Early Bird Spad 13 is an American homebuilt aircraft that was designed and produced by the Early Bird Aircraft Company of Erie, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

Early Bird Jenny American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

The Historical P-51 Mustang is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original North American P-51 Mustang and when it was available was supplied as a kit for amateur construction.

Historical Ryan STA American light aircraft

The Historical Ryan STA was an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft was an 85% scale replica of the original Ryan STA and when it was available was supplied as a kit for amateur construction.

The Lucas L-6B is a French homebuilt aircraft that was designed by Émile Lucas. When it was available the aircraft was supplied in the form of plans for amateur construction.

The NWT Spruce Coupe is an American homebuilt aircraft that was designed and produced by NWT Co of Charleston, Maine. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

The Deland Travel Air 2000 is an American homebuilt aircraft that was designed and produced by Orlando Helicopter Airways, an aircraft maintenance and repair company located in DeLand, Florida. When it was available the aircraft was supplied as a kit for amateur construction and marketed under the "Deland" brand, named for the company's location. Plans were also available.

The St Croix Pietenpol Aerial is an American homebuilt aircraft that was designed by Chad and Charles Willie and produced by St Croix Aircraft of Corning, Iowa, first flown in 1977. When it was available the aircraft was supplied in the form of plans for amateur construction, with partial kits available.

The Tech Aero TR 200 is a French homebuilt aerobatic aircraft that was designed and produced by Tech Aero of Glisolles, first flown in August 1988. When it was available the aircraft was supplied as a kit for amateur construction.

Tri-R KIS TR-1 American homebuilt aircraft

The Tri-R KIS TR-1 is an American homebuilt aircraft that was designed by Rich Trickel and produced by Tri-R Technologies of Oxnard, California, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

The Amax Double Eagle TT is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria in the late 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Amax Eagle TT is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria, introduced in the 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Amax Eagle is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria, introduced in the early 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

Bede BD-12 American homebuilt airplane

The Bede BD-12 was an American homebuilt aircraft designed by Jim Bede and produced by Bede Aircraft of Medina, Ohio, introduced in the 1990s. The aircraft was intended to be supplied as a kit for amateur construction, but only one was ever built.

The Bradley BA-200 ATAC was an American homebuilt aircraft that was designed by Bradley Aerospace of Chico, California, introduced in the mid-1990s. The aircraft was intended to be supplied as a kit for amateur construction, but is likely that only one was constructed.

References

  1. 1 2 3 4 5 6 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 114. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1