Puget Sound Naval Shipyard, officially Puget Sound Naval Shipyard and Intermediate Maintenance Facility, is a United States Navy shipyard covering 179 acres (0.7 km2) on Puget Sound at Bremerton, Washington in uninterrupted use since its establishment in 1891; it has also been known as Navy Yard Puget Sound, Bremerton Navy Yard, and the Bremerton Naval Complex.
USS Nanigo (YTB-537/YTM-537), a harbor tug of the United States Navy, was laid down on 6 December 1944 by the Consolidated Shipbuilding Corp., Morris Heights, New York, launched on 27 March 1945; and placed in service on 30 August 1945.
Arthur Foss, built in 1889 as Wallowa at Portland, Oregon, is likely the oldest wooden tugboat afloat in the world. Its 79-year commercial service life began with towing sailing ships over the Columbia River bar, and ended with hauling bundled log rafts on the Strait of Juan de Fuca in 1968. Northwest Seaport now preserves the tug as a museum ship in Seattle, Washington.
USS Quapaw (ATF–110/AT-110) was a Abnaki-class fleet ocean tug in the United States Navy. She was named after the Quapaw.
USS Challenge (SP-1015/AT-59/YT-126/YTM-126) was a commercial tugboat acquired by the United States Navy for service in World War I, and remained available for duty during World War II.
USS Mohave (AT-15) was a Arapaho-class fleet tug of the United States Navy. The unnamed steel-hulled Fleet Tug No.15 was laid down on 16 December 1913 by the Seattle Construction and Drydock Company. She was named Mohave in accordance with General Order No. 97 of 9 May 1914, for the Yuman tribe on the Colorado River in Arizona, California, and Nevada. Launched on 20 June 1914; and placed in service at the Puget Sound Navy Yard, Bremerton, Washington, on 2 December 1914.
Arapaho-class tugboats were oceangoing tugboats designated fleet tugs by the United States Navy during their service in the early half of the 20th century. They were in service during World War I and World War II. Arapaho was built by the Seattle Construction and Drydock Company in Seattle, Washington.
USS Nokomis (YT-142/YTB-142/YTM-142) was a Woban-class harbor tug built in Bremerton, Wash, and assigned to Pearl Harbor, Hawaii, in 1940. Nokomis was present during the Japanese attack on Pearl Harbor, 7 December 1941. She was the first vessel on scene at the USS Arizona, and was called off by the officers on deck because of the imminent explosion of the battery below deck. It then left and helped beach the USS Nevada, with Hoga (YT-146), and YT-153. The beaching of the Nevada saved Pearl Harbor's mouth from being blocked. After that the USS Nokomis fought fires and dewatered the battleship USS California, for 3 days. This effort made the California salvageable, to be recommissioned again later in the war. Nokomis was also the last vessel to move the surviving YC-699 barge prior to the Japanese attack on Pearl Harbor. Post-war she continued serving Pearl Harbor ships until she was decommissioned in May 1973, and eventually sold for "scrap" to Crowley, in San Francisco. She was renamed Sea Serpent and served many years in the San Francisco Bay as a tug and fire boat. In 1989, after the Loma Prieta earthquake in the SF Bay area, Nokomis and Hoga fought fires alongside each other again.
The second USS Wando, later YT-17, later YT-123, later YTB-123, was a United States Navy tug in commission from 1917 to 1946.
Skenandoa (YTB-835) is a United States Navy Natick-class tugboat named for Oneida Chief Skenandoa. Skenandoa is the second US Navy ship to bear the name.
Ottumwa (YTB–761) was a United States Navy Natick-class large harbor tug named for Ottumwa, Iowa.
Arcata (YTB-768) was a United States Navy Natick-class large harbor tug named for Arcata, California, and the third navy ship to carry the name.
USS Ala (YT-139) was a United States Navy yard tug laid down on 23 September 1939 at Bremerton, Washington, by the Puget Sound Navy Yard; launched on 6 November 1939; and completed on 11 March 1940.
USS Wingina (YTB-395) is a tugboat that was laid down as District Harbor Tug YT-395. She was re-classified while still under construction as District Harbor Tug, Large YTB-395. After her commissioning, she served in the United States Navy from 1944 to 1980.
USS Active was a tug constructed in 1888 at San Francisco by the Union Iron Works. The tug, first steel tug built on the West Coast, was launched 4 August 1888. She was acquired by the United States Navy from John D. Spreckels Brothers Co. on 18 April 1898 "for auxiliary purposes incident to a state of war." Converted for naval service at her builder's yard, she was commissioned at the Mare Island Navy Yard on 6 July 1898, Ens. Thomas M. Shaw in command. She was the third US Navy ship to be named Active.
There is a long marine tradition of Seattle tugboats. The complex inlets of Puget Sound needed tugs to move sailing vessels against contrary winds. Tugs would wait in the open Pacific off Cape Flattery to greet the sailing ships entering the sound to move lumber. During the war years and the Alaskan booms, it became of renewed importance.
Puget Sound Naval Shipyard is a large military-industrial complex located in Bremerton, Washington along the north shore of Sinclair Inlet, which opens to Puget Sound. This large shipyard is 1.5 miles (2.4 km) in length along the shore and over a half-mile in width at its greatest distance across. The shipyard has nearly 1,000 facilities such as shipfitters shops, repair shops, drydocks, piers, cranes, crane rails, railways, and tunnels. In addition to the industrial facilities, supporting structures include: residences for officers and enlisted personnel, recreation facilities, boiler, electrical substations, fuel tanks, medical facilities, and canteens. The historic district is just over a tenth of the entire shipyard, 189 acres of the shipyard's 1,347 acres. Its greatest significance was during the Second World War when it repaired large warships damaged in the Pacific theater. It was designated a National Historic Landmark District in 1992.
The Type V ship is a United States Maritime Commission (MARCOM) designation for World War II tugboats. Type V was used in World War II, Korean War and the Vietnam War. Type V ships were used to move ships and barges. Type V tugboats were made of either steel or wood hulls. There were four types of tugboats ordered for World War II. The largest type V design was the sea worthy 186-foot (57 m) long steel hull, V4-M-A1. The V4-M-A1 design was used by a number of manufacturers; a total of 49 were built. A smaller steel hull tugboat was the 94-foot (29 m) V2-ME-A1; 26 were built. The largest wooden hull was the 148-foot (45 m) V3-S-AH2, of which 14 were built. The smaller wooden hull was the 58-foot (18 m) V2-M-AL1, which 35 were built. Most V2-M-AL1 tugboats were sent to England for the war efforts under the lend-lease act. The Type V tugs served across the globe during World War II including: Pacific War, European theatre and in the United States. SS Farallon and other Type V tugs were used to help built Normandy ports, including Mulberry harbour, on D-Day, June 6, 1944 and made nine round trips to Normandy to deliver Phoenix breakwaters.
Everett-Pacific Shipbuilding & Dry Dock Company was established in 1942 to build ships needed for World War II. As part of the Emergency Shipbuilding Program the US Navy provided some of the capital to start Everett-Pacific Shipbuilding at Port Gardner Bay in Everett, Washington. Everett-Pacific was sold in 1945 to the Pacific Car and Foundry, who was already a major manufacturer of railcars and trucks. Pacific Car and Foundry was building barges for the US Navy during World War II at plants in Renton, Seattle and Tacoma in the state of Washington. The lease for the shipyard in Everett, Washington ended in 1949 and the yard closed. Pacific Car and Foundry in 1972 changed its name to Paccar Inc. to reflect its major products. The Everett-Pacific shipyard site later became part of Western Gear, a heavy machinery manufacturer. in 1987 the shipyard became part of Naval Station Everett. Everett-Pacific Shipbuilding was started by William Pigott Jr. a Seattle businessmen and his brother Paul Pigott (1900-1961). William Pigott Jr. was born in 26 Aug. 1895 in Pueblo, CO and died on 8 July 1947 in San Francisco, CA.
The Pacific Coast Engineering Company or PACECO is an American industrial fabricator and mechanical engineering company, and was previously a shipbuilding company in Oakland, California and then Alameda, California. To support the World War II demand for ships, PACECO shipyard switched over to military construction and built US Navy Tugboats.
United States