Area code split

Last updated

In telecommunications, an area code split is the practice of introducing a new telephone area code by geographically dividing an existing numbering plan area (NPA), and assigning area codes to the resulting divisions, but retaining the existing area code only for one of the divisions. The purpose of this practice is to provide more central office prefixes, and therefore more telephone numbers, in an area with high demand for telecommunication services, and prevent a shortage of telephone numbers.

Contents

An increasing demand for telephone numbers has existed since the development of automatic telephony in the early 20th century, but was spurred especially since the 1990s, with the proliferation of fax machines, pager systems, mobile telephones, computer modems and, eventually, smart phones.

The implementation of an area code split typically involves the establishment of a Class-4 toll switching center for each division of the existing numbering plan area that receive a new area code. The local seven-digit telephone numbers in any of the areas are typically not changed. The existing central office prefixes are maintained and only the central offices of the new divisions are reassigned to a new area code. The impact of a split on the general public involves the printing of new stationery, advertisements, and signage for many customers, and the dissemination of the new area code to family, friends, and customers. Computer systems and telephone equipment may require updates in address books, speed dialing directories, and other automated equipment.

Since area code splits have substantial impact in the involved communities, and involve substantial cost in telephone plant and exchange equipment, they are planned carefully well ahead of implementation with the intent that an area is not again affected by a subsequent realignment for at least a decade. [1]

The new boundaries of the numbering plan areas are drawn in a manner that minimizes splitting communities and should coincide with political subdivision where practical. [1] Other geographic features, such as rivers and bodies of water, mountain ranges, or highways may serve as guides for boundary placements. Tributary toll telephone routes should not be unduly cut, so prevent rerouting to new toll center switching systems.

The area that retains the existing area code is typically the largest, or historically more established or developed place, but the locations of large government bodies or other criteria may affect this decision.

Area code overlays

Not withstanding the desire for long-term stability of the local numbering plan and customer understanding, rapid growth in some areas has resulted in many splits within just a few years.

As a result, in the early 1990s, the North American Numbering Plan Administrator (NANPA) introduced another method for exhaustion relief: the area code overlay. This method assigns multiple area codes to the same numbering plan area, so that existing subscribers can keep established telephone numbers. Only new accounts and extra lines receive telephone numbers with the new area code. This method requires ten-digit dialing of local calls for customers of both area codes. Since 2007, most territories use overlays for mitigating numbering shortages. Most area code relief plans today do not even consider splits as relief options. [2]

See also

Related Research Articles

<span class="mw-page-title-main">North American Numbering Plan</span> Integrated telephone numbering plan of twenty North American countries

The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the telephone country code 1. Some North American countries, most notably Mexico, do not participate with the NANP.

<span class="mw-page-title-main">Area codes 416, 647, and 437</span> Telephone area codes for Toronto, Ontario

Area codes 416, 647, and 437 are telephone area codes in the North American Numbering Plan (NANP) for the city of Toronto, Ontario, Canada. Area code 416 is one of the original North American area codes created by the American Telephone and Telegraph Company (AT&T) in 1947. Area codes 647 and 437 are additional area codes for the same numbering plan area (NPA), forming an overlay numbering plan.

<span class="mw-page-title-main">Area codes 314 and 557</span> Telephone area code for St. Louis, Missouri

Area codes 314 and 557 are telephone area codes in the North American Numbering Plan (NANP) in the U.S. state of Missouri, serving the city of St. Louis and most of its inner-ring suburbs in neighboring St. Louis County. The numbering plan area is bordered to the west by area code 636, which serves St. Louis' outer suburbs to the west, south, and north. Across the Mississippi River to the east, 314 is adjacent to area code 618, which serves southern Illinois and most of Metro East. Area code 557 was added to the 314 numbering plan area on August 12, 2022, to form an overlay numbering plan.

<span class="mw-page-title-main">Area codes 415 and 628</span> Area codes for San Francisco and Marin County, California

Area codes 415 and 628 are telephone area codes in the North American Numbering Plan (NANP) for the city of San Francisco and its northern suburbs in Marin County, and the northeast corner of San Mateo County in the U.S. state of California. Area code 415 was one of the eighty-six original North American area codes established in 1947, but modified in geographic configuration later. Area code 628 was assigned in 2015 to form an overlay in that numbering plan area in mitigation of central office prefix exhaustion.

In telecommunications, an area code overlay complex is a telephone numbering plan that assigns multiple area codes to the same geographic numbering plan area (NPA). Area code overlays are implemented in territories of the North American Numbering Plan (NANP) to mitigate exhaustion of central office codes in growth areas. The method has been in use since 1992, and has been the exclusive method of area code relief since 2007.

Ten-digit dialing is a telephone dialing procedure in the countries and territories that are members of the North American Numbering Plan (NANP). It is the practice of including the area code of a telephone number when dialing to initiate a telephone call. When necessary, the ten-digit number may be prefixed with the trunk code 1, which is referred to as 1+10-digit dialing or national format.

Seven-digit dialing is a telephone dialing procedure customary in some territories of the North American Numbering Plan (NANP) for dialing telephone numbers in the same numbering plan area (NPA). NANP telephone numbers consist of ten digits, of which the leading three are the area code. In seven-digit dialing it is not necessary to dial the area code. The procedure is also sometimes known as local format or network format.

<span class="mw-page-title-main">Area code 564</span> Telephone area code for western Washington, United States

Area code 564 is a telephone overlay area code in the North American Numbering Plan (NANP) for Western Washington state, including metropolitan Seattle. The area code was first proposed in 1999 to relieve telephone number shortages in area code 360, but implementation was delayed until 2017, when it was installed for an overlay complex that comprises only the numbering plan area 360. Neighboring area codes 206, 253, and 425 were slated for expansion of the overlay upon exhaustion of central office codes in each NPA. In 2023, area code 206 was approved for expansion with a guide line for preparation of inclusion of at least nine months. Ten-digit dialing has been mandatory in all of western Washington since July 29, 2017.

Telephone number pooling, thousands-block number pooling, or just number pooling, is a method of allocating telephony numbering space of the North American Numbering Plan in the United States. The method allocates telephone numbers in blocks of 1,000 consecutive numbers of a given central office code to telephony service providers. In the United States it replaced the practice of allocating all 10,000 numbers of a central office prefix at a time. Under number pooling, the entire prefix is assigned to a rate center, to be shared among all providers delivering services in that rate center. Number pooling reduced the quantity of unused telephone numbers in markets which have been fragmented between multiple service providers, avoided central office prefix exhaustion in high growth areas, and extended the lifetime of the North American telephone numbering plan without structure changes of telephone numbers. Telephone number pooling was first tested for area code 847 in Illinois in June 1998, and became national policy in a series of Federal Communications Commission (FCC) orders from 2000 to 2003.

<span class="mw-page-title-main">Area codes 909 and 840</span> Area codes in southern California, United States

Area codes 909 and 840 are telephone area codes in the North American Numbering Plan for the far-eastern part of Los Angeles County and southwestern San Bernardino County in the U.S. state of California. Area code 909 was created on November 14, 1992, in an area code split of 909, and 840 was added to the numbering plan area to form an overlay complex effective February 23, 2021.

<span class="mw-page-title-main">Area codes 514, 438, and 263</span> Telephone area codes for Montreal

Area codes 514, 438, and 263 are telephone area codes of the North American Numbering Plan (NANP) for Montreal and most of its on-island suburbs, specifically the Island of Montreal and Île Perrot in the Canadian province of Quebec.

<span class="mw-page-title-main">Area codes 202 and 771</span> Area codes for Washington, D.C.

Area codes 202 and 771 are telephone area codes in the North American Numbering Plan (NANP) for Washington, D.C.

<span class="mw-page-title-main">Area codes 602, 480, and 623</span> Area codes for Phoenix, Arizona, United States

Area codes 602, 480, and 623 are telephone area codes in the North American Numbering Plan (NANP) for most of the Phoenix metropolitan area in the U.S. state of Arizona.

<span class="mw-page-title-main">Area codes 678, 470, and 943</span> Telephone area codes for the Atlanta metropolitan area

Area codes 678, 470, and 943 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. State of Georgia in the Atlanta metropolitan area. The area codes are assigned in an overlay plan to a combined numbering plan area (NPA) consisting of 404 and 770.

<span class="mw-page-title-main">Area codes 408 and 669</span> Area codes that serve the southern San Francisco Bay Area, California

Area codes 408 and 669 are telephone area codes in the North American Numbering Plan (NANP) in the U.S. state of California. The numbering plan area comprises most of Santa Clara County and Northern Santa Cruz County, and includes Gilroy, Morgan Hill, Saratoga, Los Gatos, Monte Sereno, Milpitas, Sunnyvale, Santa Clara, Cupertino, Campbell, and San Jose.

<span class="mw-page-title-main">Area codes 304 and 681</span> Area codes of West Virginia

Area codes 304 and 681 are telephone area codes in the North American Numbering Plan (NANP) for the entirety of the U.S. state of West Virginia. The numbering plan area was established in October 1947 with area code 304, as one of the eighty-six original North American area codes. Area code 681 was added to the same area in an overlay plan that took effect on March 28, 2009.

<span class="mw-page-title-main">Area codes 301, 240, and 227</span> North American telephone area codes in Western Maryland, U.S.

Area codes 301, 240, and 227 are telephone area codes in the North American Numbering Plan (NANP) for the western part of the U.S. state of Maryland. The numbering plan area (NPA) comprises Maryland's portion of the Greater Washington, D.C. metro area, portions of southern Maryland, along with rural western Maryland. This includes the communities of Cumberland, Frederick, Hagerstown, Gaithersburg, Potomac, Germantown, Bethesda, Rockville, Landover, Silver Spring, and Waldorf.

<span class="mw-page-title-main">Area codes 410, 443, and 667</span> Telephone area codes for east Maryland

Area codes 410, 443, and 667 are telephone area codes in the North American Numbering Plan (NANP) for the eastern half of the U.S. state of Maryland. The numbering plan area (NPA) includes the Baltimore metropolitan area and the Eastern Shore. The three area codes are overlay codes for one numbering plan area, among which 410 was the initial area code for the NPA, when it was split from area code 301 in 1991. 443 and 667 found assignment primarily in cellular service and for competitive local exchange carriers, such as Comcast and Cavalier Telephone, when introduced, but have since become universal in carrier availability.

<span class="mw-page-title-main">Area code 360</span> Telephone area code for western Washington, United States

Area code 360 is a telephone area code in the North American Numbering Plan (NANP) for western Washington state outside metropolitan Seattle and west of the Cascade Mountains. Its numbering plan area (NPA) comprises all of western Washington outside urban King, Pierce, and Snohomish counties and Bainbridge Island, Until January 15, 1995, when the area code commenced service, the numbering plan area (NPA) was served by area code 206, Washington's original area code since 1947.

The expansion of the North American Numbering Plan (NANP) is the anticipated requirement for providing more telephone numbers to accommodate future needs beyond the pool of ten-digit telephone numbers. Ten-digit telephone numbers have been in use in the United States and Canada in long-distance telephone service since the 1950s. An October 2020 analysis estimated that the numbering plan would not be exhausted until after 2050.

References

  1. 1 2 AT&T, Notes on the Network (1975), Section 2
  2. ↑ North American Numbering Plan Administrator (March 2022). 2021 NANPA Annual Report (PDF) (Report).
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.