Seven-digit dialing

Last updated

Seven-digit dialing is a telephone dialing procedure customary in some territories of the North American Numbering Plan (NANP) for dialing telephone numbers in the same numbering plan area (NPA). NANP telephone numbers consist of ten digits, of which the leading three are the area code. In seven-digit dialing it is not necessary to dial the area code. The procedure is also sometimes known as local format or network format.

Contents

History

Originally, telephone exchanges consisted of manual switchboards operated by switchboard operators. Telephone numbers had typically two to four digits, depending on the size of the community. As the number of subscribers grew, multiple exchanges served individual neighborhoods of large cities. Multiple exchanges were identified by a central office name and typically four digits, such as "Pennsylvania 5000". A rural telephone number, often party line, had often up to four digits and a letter or letter and digits to indicate which of the multiple parties on the line was desired.

Various methods were used to convert these to dialable numbers as dial systems replaced manual switchboards; many moderately-large cities used a 2L-4N format where "ADelaide 1234" would be dialled as AD-1234 (23–1234, a six-digit local call). The four largest cities, New York, Chicago, Philadelphia, and Boston, used seven digits. In New York, for example, "PENnsylvania 5000" became PEN-5000 and later PEnnsylvania 6-5000, dialled PE6-5000 or 736–5000). New York used the 3L-4N format from 1920, when dial telephones were first introduced there, until 1930, when it switched to 2L-5N.

The original North American area codes were assigned in 1947 as routing codes for operator calls, but by 1951, the first cross-country Bell System direct distance dial was placed directly from a subscriber station. The system was based on fixed-length numbers; a direct-dial long-distance call consisted of a three-digit area code and a seven-digit local number. Numbers in 2L-4N cities (such as Montréal and Toronto) were systematically lengthened to seven digits in the 1950s, a few exchanges at a time, so that all local numbers were seven digits when direct distance dialling finally came to town.

Exchange prefixes were added to small-town numbers to extend four or five-digit local numbers to the standardised seven-digit length, matching in length the then-longest local numbers in the largest major US markets.

Structure

Within the multinational calling area administered by the North American Numbering Plan, telephone numbers are composed of three fixed-length fields: a three-digit numbering plan area (NPA) code (area code), a three-digit (NXX) central office code, and a four-digit (XXXX) station number.

In seven-digit dialing, only the central office code and the station number is dialed, indicating that the call destination is within the local area code. This was the standard in most of North America from the 1950s onward. In some small villages with only one local exchange, it may have been permissible to dial only the four-digit station number. Even after exchange names were introduced, it was possible in many small cities to call local numbers by dialing only the five digits which followed.

A long-distance call within the same area code could often be dialed as 1+7D, without using an area code. The scheme relied on the second digit of an area code being 0–1 and the second digit of a local exchange being 2–9. This dialing plan was incompatible with the introduction of area code 334 and area code 360, and was therefore eliminated by January 1, 1995, in the United States, and by September 1994 in Canada. It was also eliminated as early as 1981 in some numbering plan areas in the United States that had introduced interchangeable central office codes.

Interchangeable central office codes are central office codes (NXXs) which, with a zero or one as the middle digit, resemble and duplicate area codes in the pre-1995 format. They were introduced to postpone area code splits in major cities such as New York City and Los Angeles, but in 1988, AT&T/Bellcore made them mandatory for area codes nearing exhaust of non-interchangeable codes. The Massachusetts 617/508 split was the last one before the policy changed—617 did not yet have interchangeable NXXs at the time. Area codes with interchangeable NXXs had mandatory 10-digit long-distance dialing in order to allow exchanges to distinguish between intra- and inter-area code calls. From 1988 to 1994, few area codes splits were possible due to the dwindling supply of area codes, so conservation measures became necessary.

As of 1995, with the introduction of interchangeable NPA codes, nearly all code combinations are useful as NPAs or as NXXes.

Office code protection

Traditionally, identical central office codes in adjacent Numbering Plan Areas (NPAs) would be assigned as far apart from each other as possible, so that callers living near an NPA boundary would not confuse numbers in the adjacent NPAs. Central office code protection made it possible in some low density areas to use seven digits to reach areas in another area code.

Examples:

Limitations

Area code overlay complexes introduced the requirement that calls must include the area code, resulting in a ten-digit dialing. Seven-digit dialing remains possible in some areas of North America with a single area code.

Traditionally, calling from one area code to another, specifically for long-distance calls, requires the caller to dial the trunk digit "1" before the code and number. More recently, with the increasing number and decreasing geographic size of area codes, it is increasingly possible to dial a number in another area code that is not long-distance where such a call does require the area code, but not the trunk digit (initial "1").

Many modern cellular phones automatically prepend the telephone's own area code if the user enters only seven digits, sending a total of ten digits. This is the same case with many landline providers that allow this. And also with many voice-over-IP services, users can configure default handling of seven-digit dialing in a dial plan.

Timeline

Before 1947

Local telephone numbers were governed by varying local numbering plans based on historical growth of services. Places without dial service often used special party line syntax (e.g., 2-R-48). The largest cities already used seven-digit telephone numbers and had dial service.

1947 to 1951

The American Telephone and Telegraph Company (AT&T) announced a nationwide numbering plan in 1947, which divided the United States and Canada into 86 numbering plan areas and assigned a unique area code to each. All area codes had a zero or one as the middle digit. A zero indicated that the state or province was served by a single area code, and a one indicated multiple divisions of a state or province.

Area codes were used as a universal destination routing code to the numbering plan area, and replaced the trunk routing codes that operators previously had to look up at the toll switching centers under the General Toll Switching Plan that was in use since 1929. In Operator Toll Dialing, automated equipment translated area codes to routing information. Systematic conversion of city dial systems commenced to the seven-digit (two-letter-five-number) numbering plan. Central office codes were restricted to the digits 2 to 9 in the middle position, to facilitate machine recognition when an area code was dialed. The same rule already applied to the first digit for technical and historical reasons.

1951 to 1960

Direct Distance Dialing (DDD) trials were conducted by the end of 1951, in which subscribers in Englewood, New Jersey, could dial long-distance calls to a select group of remote destinations, as far away as San Francisco, by using an area code.

DDD technology expanded to other major cities, By 1960, it was available in a few places in Canada, as well as most large American cities. This decade is notable for implementation of some thirty more area codes, including in Alaska, Hawaii, and the Caribbean.

1960 to 1981

Major progress may be noted in provisioning DDD service. Long-distance billing was computerized in the 1960s to the early 1980s. Few area codes were introduced during this time. Toll-free 800-service was introduced. Service demands in the largest American cities of New York and greater Los Angeles area resulted in the first use of interchangeable central office codes (NXX). All-number calling was implemented, replacing 2L-5N telephone numbers. A very small number of places still did not use a seven-digit numbering plan by 1981.

1981 to 1994

New area code assignments were increasing in the 1980s. From 1990 to 1994, all remaining assignable codes entered service. The exhaustion of NXX codes necessitated interchangeable codes in several more area codes. Ten-digit dialing, or 1+10D, was implemented in area codes with interchangeable NXX codes. Protected dialing plans as in national capital areas were discontinued to help meet demand without area code relief. As 1994 neared its end, ten-digit dialing became required throughout the numbering plan in preparation for interchangeable NPA codes.

All local numbers now had seven-digit, as the last technological hold-outs had given way to modern switching technology. The concept of a ten-digit local number was conceived, as New York had an overlay code (917, implemented in 1992), but seven-digit dialing was still the norm.

1995 to 2019

Interchangeable NPA codes were introduced in Washington state and Alabama, and some forty new area codes were introduced in 1999 as relief was implemented for pent-up demand. This included two additional toll-free prefixes as the 888 code was quickly exhausted. Since 1999, a more steady rate of area code introductions has taken place, the rate being slower due to one or more factors:

With overlays in several areas (the relief method of choice in Canada since 2000), ten-digit local numbers were supplanting seven-digit dialing; by 2019, only four Canadian area codes (506, 709, 807 and 867) were still single-code areas (no overlay) and allowed seven-digit local dialing. Although fewer American area codes were overlaid, seven-digit dialing was also disappearing in the United States.

2020 to present

On July 16, 2020, the FCC adopted rules to establish 988 as the three-digit phone number for the National Suicide Prevention Lifeline. [2] This required 82 area codes to switch to mandatory ten-digit dialing by October 24, 2021, because they had already used 988 as a central office code. [3]

Similar transitions are scheduled in most parts of the remaining single-code areas in Canada by May 31, 2023, due in part to the rollout of 9-8-8 service in that country. [4]

See also

Related Research Articles

<span class="mw-page-title-main">North American Numbering Plan</span> Integrated telephone numbering plan of twenty North American countries

The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the telephone country code 1. Some North American countries, most notably Mexico, do not participate with the NANP.

<span class="mw-page-title-main">Area codes 416, 647, and 437</span> Telephone area codes for Toronto, Ontario

Area codes 416, 647, and 437 are telephone area codes in the North American Numbering Plan (NANP) for the city of Toronto, Ontario, Canada. Area code 416 is one of the original North American area codes created by the American Telephone and Telegraph Company (AT&T) in 1947. Area codes 647 and 437 are additional area codes for the same numbering plan area (NPA), forming an overlay numbering plan.

<span class="mw-page-title-main">Area codes 716 and 624</span> Telephone area code for western New York state

Area codes 716 and 624 are telephone area codes in the North American Numbering Plan (NANP) for Buffalo, Niagara Falls, and four surrounding counties in western New York. 716 was one of the original North American area codes established in 1947, while 624 was assigned to the identical numbering plan area (NPA) in 2023.

Ten-digit dialing is a telephone dialing procedure in the countries and territories that are members of the North American Numbering Plan (NANP). It is the practice of including the area code of a telephone number when dialing to initiate a telephone call. When necessary, the ten-digit number may be prefixed with the trunk code 1, which is referred to as 1+10-digit dialing or national format.

<span class="mw-page-title-main">Area codes 514, 438, and 263</span> Telephone area codes for Montreal

Area codes 514, 438, and 263 are telephone area codes of the North American Numbering Plan (NANP) for Montreal and most of its on-island suburbs, specifically the Island of Montreal and Île Perrot in the Canadian province of Quebec.

<span class="mw-page-title-main">Area codes 202 and 771</span> Area codes for Washington, D.C.

Area codes 202 and 771 are telephone area codes in the North American Numbering Plan (NANP) for Washington, D.C.

<span class="mw-page-title-main">Telephone exchange names</span> Alphabetic telephone numbering plan

A telephone exchange name or central office name was a distinguishing and memorable name assigned to a central office. It identified the switching system to which a telephone was connected, and facilitated the connection of telephone calls between switching systems in different localities.

<span class="mw-page-title-main">Area codes 608 and 353</span> Telephone area code for southwestern Wisconsin

Area codes 608 and 353 are telephone area codes in the North American Numbering Plan for much of southwestern Wisconsin, including the state capital city Madison. Area code 608 was assigned in 1955 to a numbering plan area created from areas with area code 414 and area code 715, and was the third area code created in Wisconsin. Rapid growth of the area, specifically in Dane County, brought the area code close to exhaustion of central office prefixes, with NANPA projections in 2022 projecting the need for relief by late 2023. In September 2022, the Wisconsin Public Service Commission and North American Numbering Plan Administrator (NANPA) announced an overlay complex for the numbering plan area with new area code 353, with an in-service date of September 15, 2023. New central office code orders were accepted starting on July 11, 2023, but activatlon is contingent on complete exhaustion of central office codes for 608.

Area code 246 is the telephone area code in the North American Numbering Plan (NANP) for Barbados. The sequence 246 spells BIM on an alpha-numeric telephone keypad, a nickname for the island.

<span class="mw-page-title-main">Area codes 678, 470, and 943</span> Telephone area codes for the Atlanta metropolitan area

Area codes 678, 470, and 943 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. State of Georgia in the Atlanta metropolitan area. The area codes are assigned in an overlay plan to a combined numbering plan area (NPA) consisting of 404 and 770.

<span class="mw-page-title-main">Area codes 301, 240, and 227</span> North American telephone area codes in Western Maryland, U.S.

Area codes 301, 240, and 227 are telephone area codes in the North American Numbering Plan (NANP) for the western part of the U.S. state of Maryland. The numbering plan area (NPA) comprises Maryland's portion of the Greater Washington, D.C. metro area, portions of southern Maryland, along with rural western Maryland. This includes the communities of Cumberland, Frederick, Hagerstown, Gaithersburg, Potomac, Germantown, Bethesda, Rockville, Landover, Silver Spring, and Waldorf.

<span class="mw-page-title-main">Area code 509</span> Telephone area code for eastern Washington state

Area code 509 is the telephone area code in the North American Numbering Plan (NANP) for the eastern part of the U.S. state of Washington. The numbering plan area (NPA) roughly comprises the state east of the Cascade Mountains, and includes Spokane, the Tri-Cities, Ellensburg, Yakima, Walla Walla, and Wenatchee. The area code was assigned in a split of area code 206 in 1956.

<span class="mw-page-title-main">Area code 856</span> Telephone area code for southwestern New Jersey

Area code 856 is a telephone area code in the North American Numbering Plan (NANP) for the southwestern part of the U.S. state of New Jersey. The numbering plan area (NPA) includes the Camden, Cherry Hill, and Vineland areas and a small part of Willingboro Township and the western part of Burlington County. 856 is essentially coextensive with the New Jersey side of the Philadelphia metropolitan area.

Area code 731 is a telephone area code in the North American Numbering Plan (NANP) for the western part of the U.S. state of Tennessee.

The expansion of the North American Numbering Plan (NANP) is the anticipated requirement for providing more telephone numbers to accommodate future needs beyond the pool of ten-digit telephone numbers. Ten-digit telephone numbers have been in use in the United States and Canada in long-distance telephone service since the 1950s. An October 2020 analysis estimated that the numbering plan would not be exhausted until after 2050.

<span class="mw-page-title-main">PEnnsylvania 6-5000</span> US telephone number from New York City

PEnnsylvania 6-5000 is a telephone number in New York City, written in the 2L+5N format that was common from about 1930 into the 1960s. The number is best known from the 1940 hit song "Pennsylvania 6-5000", a swing jazz and pop standard recorded by the Glenn Miller Orchestra. Its owner, the Hotel Pennsylvania, claims it to be the oldest continuously used telephone number in New York City. The hotel opened on January 25, 1919, but the exact age of the telephone number and the veracity of the hotel's claim are unknown. For many years, callers to (212) 736-5000 were greeted with the hotel's phone system recorded greeting that includes a portion of the song.

Telephone numbers in Canada follow the fixed-length format of the North American Numbering Plan (NANP) of a three-digit area code, a three-digit central office code, and a four-digit station or line code. This is represented as NPA NXX XXXX.

The original North American area codes were established by the American Telephone and Telegraph Company (AT&T) in 1947, after the demonstration of regional Operator Toll Dialing during the World War II period. The program had the goal of speeding the connecting times for long-distance calling by eliminating intermediary telephone operators. Expanding this technology for national use required a comprehensive and universal, continent-wide telephone numbering plan.

In the North American Numbering Plan (NANP), interchangeable NPA and central office codes constituted a change in numbering plan design and policy, to mitigate exhaustion of the numbering resources of the ten-digit telephone numbers used in the closed numbering plan of the NANP.

In the administration of the North American Numbering Plan, central office code protection is a numbering policy for maintaining local seven-digit dialing in communities that extend on both sides of the boundary line between multiple numbering plan areas (NPAs), such as in cross-border towns on state lines. Code protection prevents the use of the same telephone number on both sides by not assigning the same central office code of one NPA in the adjacent NPA.

References

  1. ↑ In-state calling (archived) at fairpoint.com
  2. ↑ "Designating 988 for the National Suicide Prevention Lifeline". FCC.gov. Federal Communications Commission. July 17, 2020. Archived from the original on Aug 7, 2020. Retrieved July 6, 2021.
  3. ↑ "Transition to 10-digit dialing for 988". NANPA. Archived from the original on April 26, 2021. Retrieved July 6, 2021.
  4. ↑ Canadian Radio-television and Telecommunications Commission (August 31, 2022). "Telecom Regulatory Policy CRTC 2022-234: Introduction of 9-8-8 as the three-digit abbreviated dialing code for mental health crisis and suicide prevention services and Northwestel Inc.'s application for modified implementation of ten-digit local dialing" . Retrieved September 6, 2022.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.