Area code 360 is a telephone area code in the North American Numbering Plan (NANP) for all of Washington state outside metropolitan Seattle and west of the Cascade Mountains. The numbering plan area (NPA) serves all of western Washington outside urban King, Pierce, and Snohomish counties and Bainbridge Island, Until January 15, 1995, when the area code commenced service, the numbering plan area (NPA) was served by area code 206, Washington's original area code since 1947.
Since 2017, area code 360 has been overlaid with area code 564. Additional NPAs in western Washington will be overlaid with 564 as well when numbering shortages demand relief.
From 1947 to 1957, all of Washington state was assigned area code 206 for routing long-distance telephone calls in Operator Toll Dialing. In 1957, the numbering plan area (NPA) was reduced to just the western part of the state, with most of the state east of the Cascade Mountains becoming area code 509.
Washington remained with two NPAs for 38 years. This configuration was unchanged even with western Washington's explosive growth in the second half of the 20th century and the proliferation of cell phones, fax machines, and pagers. By the early 1990s, the ensuing resource pressure meant that the need for additional central office prefixes and telephone numbers could no longer be staved off. Accordingly, of the region outside the Seattle and Tacoma areas was split from 206 to form a new numbering plan area with area code 360.
The 360 area code consists of two sections due to numbering disputes in the community. The configuration arose when residents of several Seattle exurbs protested their move from the more-established 206 to the new area code. [1] In response, US West returned some central offices in these exurbs to 206. However, 206 was on the brink of exhaustion even after the creation of 360. The restoration of these exurbs forced the Washington Public Utilities Commission to switch most of Seattle's suburban ring into areas 253 and 425 in 1998, sooner than originally planned.
This made 360 one of the few NPAs in the North American Numbering Plan without a continuous land border; [lower-alpha 1] others include 706 in Georgia, 423 in Tennessee and 386 in Florida. Each case results from a split that removed the middle from a formerly contiguous area.
In 1999, the Washington Utilities and Transportation Commission intended to overlay 360 with an additional area code, but the implementation was delayed indefinitely. A 2016 report forecasted exhaustion in 2018. [3] The change was finally approved in May 2016. [4] On August 28, 2017 numbering plan area 360 was assigned the second area code, 564, to form an overlay numbering plan. [5] Area code 564 is intended to eventually overlay other western Washington NPAs (206, 253, and 425) when demand requires numbering relief action. [5] Beginning July 29, 2017 all calls in western Washington required ten-digit dialing. [6] the first 564 prefix was assigned in 2021 [7] [8] [ disputed (for: Conflict between sources used) – discuss ] and the final [9] 360 prefix was assigned on October 22, 2021. [8]
Area codes 360 and 334 (Alabama), which began service on the same day, were the first two area codes in the North American Numbering Plan with a middle digit other than 0 or 1. [10]
The larger, western portion stretches from the Strait of Juan de Fuca through the Olympic Peninsula and Southwest Washington to the Oregon border, while the portion on the east shore of Puget Sound stretches from the border with British Columbia, Canada, almost to Everett. Whidbey Island in Puget Sound is also included.
Cities and towns in the numbering plan area include:
The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the telephone country code 1. Some North American countries, most notably Mexico, do not participate with the NANP.
In telecommunications, an area code overlay complex is a telephone numbering plan that assigns multiple area codes to the same geographic numbering plan area (NPA). Area code overlays are implemented in territories of the North American Numbering Plan (NANP) to mitigate exhaustion of central office codes in growth areas. The method has been in use since 1992, and has been the exclusive method of area code relief since 2007.
Area code 564 is a telephone overlay area code in the North American Numbering Plan (NANP) for Western Washington state, including metropolitan Seattle. The area code was first proposed in 1999 to relieve telephone number shortages in area code 360, but implementation was delayed until 2017, when it was installed for an overlay complex that comprises only the numbering plan area 360. Neighboring area codes 206, 253, and 425 were slated for expansion of the overlay upon exhaustion of central office codes in each NPA. In 2023, area code 206 was approved for expansion with a guide line for preparation of inclusion of at least nine months. Ten-digit dialing has been mandatory in all of western Washington since July 29, 2017.
Telephone number pooling, thousands-block number pooling, or just number pooling, is a method of allocating telephony numbering space of the North American Numbering Plan in the United States. The method allocates telephone numbers in blocks of 1,000 consecutive numbers of a given central office code to telephony service providers. In the United States it replaced the practice of allocating all 10,000 numbers of a central office prefix at a time. Under number pooling, the entire prefix is assigned to a rate center, to be shared among all providers delivering services in that rate center. Number pooling reduced the quantity of unused telephone numbers in markets which have been fragmented between multiple service providers, avoided central office prefix exhaustion in high growth areas, and extended the lifetime of the North American telephone numbering plan without structure changes of telephone numbers. Telephone number pooling was first tested for area code 847 in Illinois in June 1998, and became national policy in a series of Federal Communications Commission (FCC) orders from 2000 to 2003.
Area codes 909 and 840 are telephone area codes in the North American Numbering Plan for the far-eastern part of Los Angeles County southwestern San Bernardino County, and a small portion of Riverside County in the U.S. state of California. Area code 909 was created on November 14, 1992, in an area code split of 909, and 840 was added to the numbering plan area to form an overlay complex effective February 23, 2021. While most of western Riverside County now uses Area code 951, some residents in Eastvale and Corona were allowed to keep the 909 area code after the split in 2004.
Area code 404 is a telephone area code in the North American Numbering Plan (NANP) for Atlanta, Georgia and its closest suburbs. This comprises roughly the area encircled by Interstate 285. It is an enclave area code, surrounded by area code 770, which serves most of Atlanta's suburbs. Both 404 and 770 are overlaid by area codes 678, 470, and 943.
Area codes 706 and 762 are telephone area codes in the North American Numbering Plan (NANP) for the northern and west central parts of Georgia, but excluding metropolitan Atlanta.
Area codes 202 and 771 are telephone area codes in the North American Numbering Plan (NANP) for Washington, D.C.
Area codes 813 and 656 are area codes in the North American Numbering Plan for the U.S. state of Florida in the city of Tampa, Florida, and its surrounding areas, such as Zephyrhills and Oldsmar. In 2022, due to exhaustion of central office prefixes, area code 656 was added to the service area forming an overlay complex.
Area codes 678, 470, and 943 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. State of Georgia in the Atlanta metropolitan area. The area codes are assigned in an overlay plan to a combined numbering plan area (NPA) consisting of 404 and 770.
Area codes 408 and 669 are telephone area codes in the North American Numbering Plan (NANP) in the U.S. state of California. The numbering plan area comprises most of Santa Clara County and Northern Santa Cruz County, and includes Gilroy, Morgan Hill, Saratoga, Los Gatos, Monte Sereno, Milpitas, Sunnyvale, Santa Clara, Cupertino, Campbell, and San Jose.
Area codes 304 and 681 are telephone area codes in the North American Numbering Plan (NANP) for the entirety of the U.S. state of West Virginia. The numbering plan area was established in October 1947 with area code 304, as one of the eighty-six original North American area codes. Area code 681 was added to the same area in an overlay plan that took effect on March 28, 2009.
Area codes 610, 484, and 835 are telephone area codes in the North American Numbering Plan (NANP) for the eastern and southeastern regions of Pennsylvania. The numbering plan area (NPA) includes regions to the west of Philadelphia and the cities Allentown, Bethlehem, and Reading. It includes much of the Delaware Valley, including almost all of Delaware County, most of the Philadelphia Main Line, and all of the Lehigh Valley.
Area codes 301, 240, and 227 are telephone area codes in the North American Numbering Plan (NANP) for the western part of the U.S. state of Maryland. The numbering plan area (NPA) comprises Maryland's portion of the Greater Washington, D.C. metro area, portions of southern Maryland, along with rural western Maryland. This includes the communities of Cumberland, Frederick, Hagerstown, Gaithersburg, Potomac, Germantown, Bethesda, Rockville, Landover, Silver Spring, and Waldorf.
Area codes 410, 443, and 667 are telephone area codes in the North American Numbering Plan (NANP) for the eastern half of the U.S. state of Maryland. The numbering plan area (NPA) includes the Baltimore metropolitan area and the Eastern Shore. The three area codes are overlay codes for one numbering plan area, among which 410 was the initial area code for the NPA, when it was split from area code 301 in 1991. 443 and 667 found assignment primarily in cellular service and for competitive local exchange carriers, such as Comcast and Cavalier Telephone, when introduced, but have since become universal in carrier availability.
Area code 206 is a telephone area code in the North American Numbering Plan (NANP) for the U.S. state of Washington. The numbering plan area (NPA) includes Seattle and most of its innermost suburbs. This includes such suburbs as Shoreline and Lake Forest Park; Mercer, Bainbridge, and Vashon Islands; and portions of metropolitan Seattle from Des Moines to Woodway.
Area code 253 is a telephone area code in the North American Numbering Plan (NANP) for a part of the U.S. state of Washington. The numbering plan area (NPA) includes cities in King County that are situated south of Seattle and the southern Puget Sound area, centered at Tacoma and extending to include the areas around Gig Harbor, Auburn, and Roy. It also serves the western half of Pierce County, as well as southern King County.
Area code 425 is a telephone area code in the North American Numbering Plan (NANP) for the suburbs north and east of Seattle in the U.S. state of Washington. The numbering plan area includes the Eastside, extending east to North Bend, north to Everett, and south to Maple Valley. It also includes the cities of Bellevue and Redmond, both major employment centers. The area code was created in 1997 in a three-way split of area code 206.
'Economically and socially we're part of the lower mainland. Governmentally, we're part of Whatcom County. Our schools are in Blaine. None of it is a local call'
North: 236/672/778, 250, 604 | ||
West: Pacific Ocean, 236/672/778, 250 | Area code 360 / 564 (206, 253, 425) | East: 509 |
South: 503/971 | ||
British Columbia area codes: 250, 604, 778/236/672 | ||
Oregon area codes: 503/971, 541/458 |