Argon 18

Last updated
Argon 18 Inc.
Company type Private
Industry Bicycles
Founded1989
Headquarters Montreal, Quebec
Canada
ProductsBicycle and Related Components
Website www.argon18.com

Argon 18 is a Canadian cycle manufacturer founded in 1989 in Montreal, Quebec by Gervais Rioux. The name is derived from the element Argon, which is number 18 on the periodic table of elements. Argon 18 bikes are distributed in more than 70 countries. Argon 18 also sponsors professional cycling teams and professional triathletes.

Contents

In June 2017, they became the official supplier to Canada's national road, track and para-cycling cycling teams, through the 2020 Olympic Games. [1]

Cycle technology

3D Headtube Argon 18 Gallium Pro with Shimano Dura Ace 9000 and Enve 6.7 Wheelset (14114639956).jpg
3D Headtube
ONEness Concept

The ONEness concept consists of an integrated aero and stemless fork/aerobar combination that is designed to be aerodynamic and ergonomic. The design extends to the frame, fork, headset, base bar and aero bars, brakes and levers as well as a reversible carbon seatpost which can be 76 or 78°. [2]

3D Headtube

This consists of interchangeable structural spacers that extend the headtube's height. [3]

Integrated Disc Brakes

Argon 18 introduced the world’s first integrated disc brakes on the E-119 Tri+ Disc, completely hiding the calipers as well as the hydraulic cables and reservoirs, for a clear aero advantage. Their unique solution is a design that includes an air duct to allow for airflow over the brake pads, ensuring proper heat dissipation and maximum braking power. Using CFD analysis on the front caliper in a comparison of the aero performance of the integrated disc brake against a standard disc brake, they found that the aero improvement of integrated disc brakes offered a 1W advantage on a flat road for a 300W riding power, or a savings of 10 seconds over 100km on a flat road for a 300W riding power. They also found a 25% decrease of CdA, when looking at the caliper, disc and surrounding fork surface. [4]

Professional cycling teams

Professional triathletes

Related Research Articles

<span class="mw-page-title-main">Disc brake</span> Mechanism using friction to resist rotation of a circular plate

A disc brake is a type of brake that uses the calipers to squeeze pairs of pads against a disc or a "rotor" to create friction. This action slows the rotation of a shaft, such as a vehicle axle, either to reduce its rotational speed or to hold it stationary. The energy of motion is converted into waste heat which must be dispersed.

<span class="mw-page-title-main">Bicycle brake</span> Braking device for bicycles

A bicycle brake reduces the speed of a bicycle or prevents the wheels from moving. The two main types are: rim brakes and disc brakes. Drum brakes are less common on bicycles.

<span class="mw-page-title-main">Pinarello</span> Italian bicycle manufacturer

Cicli Pinarello S.p.A. is an Italian bicycle manufacturer based in Treviso, Italy. Founded in 1953, it supplies mostly handmade bicycles for the road, track, E-bikes(NYTRO), mountain bikes and cyclo-cross. The company also produces an in-house component brand – MOST.

<span class="mw-page-title-main">Buell Motorcycle Company</span> American motorcycle manufacturer

Buell Motorcycles is an American motorcycle manufacturer based in Grand Rapids, Michigan, United States. It was founded in 1983 by ex-Harley-Davidson engineer Erik Buell. Harley-Davidson acquired 49 percent of Buell in 1993, and Buell became a wholly owned subsidiary of Harley-Davidson by 2003. On November 17, 2006, Buell announced that it had produced and shipped its 100,000th motorcycle.

<span class="mw-page-title-main">Racing bicycle</span> Bicycle designed for competitive road cycling

A racing bicycle, also known as a road bike is a bicycle designed for competitive road cycling, a sport governed by and according to the rules of the Union Cycliste Internationale (UCI).

Colnago Ernesto & C. S.r.l. or Colnago is a manufacturer of high quality road-racing bicycles founded by Ernesto Colnago near Milano in Cambiago, Italy. It remained a family-controlled firm until May 4, 2020, when it was announced that the UAE-based investment company, Chimera Investments LLC, had acquired a majority of the Colnago shares from Ernesto Colnago, although the headquarters will remain located in Italy after the acquisition. Instead of following his family's farming business, Ernesto Colnago chose to work in the cycle trade, and was apprenticed first to Gloria Bicycles at the age of 13, and subsequently taking up road racing. After a bad crash ended his racing career, he began subcontracting for Gloria, and opened his own shop in 1954, building his first frames the same year. While building frames, he remained much in demand as a racing mechanic. He was second mechanic on the Nivea team Giro d'Italia under Faliero Masi in 1955, eventually being employed as head mechanic for the Molteni team of Belgian cycling legend Eddy Merckx in 1963.

<span class="mw-page-title-main">Yamaha XS 650</span> Yamaha motorcycle

The Yamaha XS650 is a mid-size motorcycle made by Yamaha Motor Company. The standard model was introduced in October 1969,and produced through 1979. The "Special" cruiser model was introduced in 1978 and produced through 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later the Hosk company was acquired by Showa Corporation, and in 1960 Yamaha had bought Showa with Hosk's early design of 650 cc twin.

<span class="mw-page-title-main">Downhill bike</span> Type of mountain bike

A downhill bike is a full suspension bicycle designed for downhill cycling on particularly steep, technical trails. Unlike a typical mountain bike, durability and stability are the most important design features, compared to lighter, more versatile cross-country bikes. Downhill bikes are primarily intended for high-speed descent, and downhill riders will usually push, or shuttle via chairlifts or motorized vehicles, to the trailhead. Downhill bikes share similarities with freeride bikes due to their large strong frames and increased travel.

Hope Technology is a bicycle component manufacturer based in Barnoldswick, Lancashire. Primarily concerned with manufacturing high-quality mountain bike componentry, Hope have branched into accessories such as lights, tools and riding gear.

<span class="mw-page-title-main">Liam Bertazzo</span> Italian cyclist (born 1992)

Liam Bertazzo is an Italian racing cyclist, who currently rides for UCI Continental team Maloja Pushbikers. He rode at the 2014 UCI Road World Championships. He was named in the start list for the 2016 Giro d'Italia.

<span class="mw-page-title-main">Roy Eefting</span> Dutch cyclist (born 1989)

Roy Eefting-Bloem is a Dutch road and track cyclist, who currently rides for UCI Continental team Maloja Pushbikers. He competed at the 2015 UCI Track Cycling World Championships.

<span class="mw-page-title-main">Motorcycle braking systems</span>

Motorcycle braking systems have varied throughout time, as motorcycles evolved from bicycles with an engine attached, to the 220 mph (350 km/h) prototype motorcycles seen racing in MotoGP. Most systems work by converting kinetic energy into thermal energy (heat) by friction. On motorcycles, approximately 70% of the braking effort is performed by the front brake. This however can vary for individual motorcycles; longer-wheelbase types having more weight biased rearward, such as cruisers and tourers, can have a`greater effort applied by the rear brake. In contrast, sports bikes with a shorter wheelbase and more vertical fork geometry can tolerate higher front braking loads. For these reasons, motorcycles tend to have a vastly more powerful front brake compared to the rear.

<span class="mw-page-title-main">Maximilian Kuen</span> Austrian cyclist

Maximilian Kuen is an Austrian former professional cyclist, who rode professionally between 2011 and 2021 for the Gebrüder Weiss–Oberndorfer, Tirol Cycling Team, My Bike–Stevens and Team Vorarlberg squads.

Wittson Cycles is a Northern European handmade bicycle manufacturer located in Klaipeda, Lithuania. Wittson works exclusively with titanium and sources the European Grade 9 tubes from Baltic neighbor Sweden and the VSMPO Titan Scandinavia corporation, which also supplies aerospace luminaries Boeing and Airbus. Wittson uses 3/2.5 Ti for their frame production, and 6/4 Ti, which has greater tensile strength but is much harder to weld, for dropouts and bottom bracket shells, along with smaller bits such as brake cable stops.

<span class="mw-page-title-main">Daniel Bichlmann</span> German cyclist

Daniel Bichlmann is a German professional racing cyclist, who currently rides for UCI Continental team Maloja Pushbikers. He rode in the men's team time trial at the 2016 UCI Road World Championships.

<span class="mw-page-title-main">Moritz Malcharek</span> German cyclist

Moritz Malcharek is a German road and track cyclist, who currently rides for UCI Continental team Maloja Pushbikers. Representing Germany at international competitions, Malcharek competed at the 2016 UEC European Track Championships in the scratch event.

The 2016 Eschborn-Frankfurt – Rund um den Finanzplatz was the 54th edition of the Eschborn-Frankfurt – Rund um den Finanzplatz, a semi-classic cycling race in Germany. It was held, as customary on Tag der Arbeit, 1 May. The race started in Eschborn and finished in Frankfurt, covering a total distance of 206.8 kilometres (128.5 mi), and was a part of the 2016 UCI Europe Tour.

<span class="mw-page-title-main">2019 Tour de la Provence</span> Cycling race

The 2019 Tour de la Provence was a road cycling stage race that took place between 14 and 17 February 2019. The race was rated as a 2.1 event as part of the 2019 UCI Europe Tour, and was the fourth edition of the Tour de la Provence.

<span class="mw-page-title-main">Maloja Pushbikers</span> German cycling team

Maloja Pushbikers is a German professional cycling team founded in 2014 around team manager Christian Grasmann.

<span class="mw-page-title-main">2022 Czech Cycling Tour</span> Cycling race

The 2022 Sazka Tour was a road cycling stage race that took place between 4 and 7 August 2022 in Czech Republic. The race was rated as a category 2.1 event on the 2022 UCI Europe Tour calendar, and was the 13th edition of the Sazka Tour.

References

  1. Beacon, Bill (15 June 2017). "National cycling team to use Canadian-made Argon 18 bikes in multi-year deal". Montreal Gazette. The Canadian Press. Retrieved 15 June 2017.
  2. "ONEness Concept | Argon 18". Argon18bike.com. 2020-04-22.
  3. "3D Headtube | Argon 18". Argon18.com. 2020-04-22.
  4. "Integrated Disc Brakes | Argon 18". Argon18.com. 2020-04-22.
  5. "Maloja Pushbikers | Argon 18". Argon18bike.com.
  6. "Craig Alexander ; Argon 18". Argon18bike.com.
  7. "Heather Jackson ; Argon 18". Argon18bike.com.
  8. "Michelle Vesterby ; Argon 18". Argon18bike.com.
  9. "Eric Lagerstrom ; Argon 18". Argon18bike.com.
  10. "Stéphanie Roy ; Argon 18". Argon18bike.com.