Automatic equipment identification

Last updated

Automatic equipment identification (AEI) is an electronic recognition system in use with the North American railroad industry. Consisting of passive tags mounted on each side of rolling stock and active trackside readers, AEI uses RF technology to identify railroad equipment while en route.

Contents

RFID antenna used by trackside AEI readers AEIreader.jpg
RFID antenna used by trackside AEI readers

History

Predecessor systems

In the late 1960s, railroads in North America began searching for a system that would allow them to automatically identify rail cars and other rolling stock. Through the efforts of the Association of American Railroads (AAR), a number of companies developed automatic car identification (ACI) systems. The AAR selected four systems for extensive field tests. General Electric developed an RFID system, ABEX a microwave system, Wabco a black and white barcode system, and General Telephone and Electronics (GTE) a color barcode system called KarTrak. The RFID system used a tag mounted under the rail car and an interrogator installed between the rails. The other three systems had labels that were mounted on each side of the rail car and a trackside scanner.

ACI plate 1 ACI plate 1.jpg
ACI plate 1

After the initial field tests, the ABEX, Wabco, and the GTE KarTrak ACI systems were selected for a head-to-head accuracy test on the Pennsylvania Railroad, at Spruce Creek PA. The KarTrak system was declared the winner and selected by the AAR as the standard.

The KarTrak system was abandoned by the late 1970s. Because of this failure, the railroad industry did not seriously search for another system to identify rail cars until the mid-1980s.

Development

ACI plate with older KarTrak color barcode. AEI tag can also be seen on side of car to the right and lower of ACI plate. ACI plate.jpg
ACI plate with older KarTrak color barcode. AEI tag can also be seen on side of car to the right and lower of ACI plate.

Burlington Northern was the first railroad in North America to renew the search for an effective identification system. BN had been closely following the efforts of various maritime shipping companies, such as American President Lines, in their efforts to find a system to automatically identify containers. Based on the maritime companies' success with RF-based identification systems, Burlington Northern began a testing program in 1986.

Burlington Northern initially asked nine vendors to present their identification systems. From this group of nine, Burlington Northern selected two systems for full-scale testing. The two vendors selected were General Railway Signal (GRS) and Union Switch & Signal (US&S). The US&S system is manufactured by Amtech Corporation of Dallas, Texas.

In January 1988, Burlington Northern equipped 1,500 taconite (iron ore pellets) rail cars in northern Minnesota each with a GRS and an Amtech transponder. Each vendor also installed three wayside reader sites. All tags were mounted on the sides of the rail cars.

In August 1988, the Burlington Northern Railroad presented a report on the results of their testing at the AAR Communication and Signal Annual Meeting. They stated that the accuracy of both systems over a six-month period was in excess of 99.99%. Based on the spectacular results from both systems, the Burlington Northern asked the AAR to form a committee to write an AEI standard for the North American rail industry, and suggested that the AAR use the current draft ISO standard for container identification as a starting point.

A committee was formed by the AAR, charged with the development of an AEI standard. Railroads such as Norfolk Southern Railway, Union Pacific Railroad, CSX Transportation and Canadian National Railway began their own testing programs and reported the results to the AAR's AEI Committee.

In August 1989, the AAR informed various identification system vendors that Amtech's identification technology had been selected as the AEI standard.

By the fall of 1989, the AAR's AEI Committee had selected a technology and defined the tag's data format. The only major question still unresolved was whether to place tags on the sides of the rail cars or underneath, each approach having advantages and disadvantages in cost and maintainability. It was finally decided by the AEI Committee in the summer of 1990 that a tag would be mounted on each side of each car.

AEI tag affixed to the side of a freight car. AEItag.jpg
AEI tag affixed to the side of a freight car.

In July 1990, the AAR Committee on Car Service sent a resolution to the O-T General Committee of the AAR to set a mandatory implementation date when all rail cars in interchange service would be tagged. The O-T General Committee is the highest operating committee within the AAR. The O-T General Committee requested that the AEI Committee perform a cost/benefit analysis on mandatory AEI implementation and recommend an implementation schedule. In October 1990, the O-T General Committee approved the recommended AEI voluntary standard.

With these recommendations, in August 1991, the O-T General Committee of the Association of American Railroads voted to make the AEI standard mandatory. The mandatory vote was ratified by the AAR Board of Directors at their meeting in September 1991. The mandatory period started on 1 March 1992, and ended on 31 December 1994. By the end of this period all 1.4 million rail cars in North American interchange service were to be tagged.

As part of the AAR's adoption of a standard based on Amtech technology, AAR required that Amtech license that technology. At the time of the AAR's 1991 mandate, six vendors sold AEI site equipment. Those vendors were US&S, Safetran, Harmon, VideoMasters, CCTC International in partnership with IBM, and Southern Technologies. [1] As of August 2007, only two of these vendors remain, SAIC(formely Video Masters), now owned by Comet Industries, as of 2007 and Southern Technologies.

Usage

As of 31 December 1994, Amtech had shipped over 3.1 million tags to railways in North America. The AAR reported that over 95% of the North American rail car fleet was tagged. Over 3,000 readers have been installed by the railways in North America as of the end of 2000. Amtech was bought by TransCore. TransCore is today the most important producer of RFID tags for rail in the world.

The AAR's S-918 specifications outline ten recommended frequencies ranging from 902.250 to 921.500 MHz, depending on the location of the reading device (in a yard or trackside), with a nominal transmitting power of 2.0 watts (measured at the transmitter).

Related Research Articles

<span class="mw-page-title-main">Telemetry</span> Data and measurements transferred from a remote location to receiving equipment for monitoring

Telemetry is the in situ collection of measurements or other data at remote points and their automatic transmission to receiving equipment (telecommunication) for monitoring. The word is derived from the Greek roots tele, 'remote', and metron, 'measure'. Systems that need external instructions and data to operate require the counterpart of telemetry: telecommand.

<span class="mw-page-title-main">Barcode</span> Optical machine-readable representation of data

A barcode or bar code is a method of representing data in a visual, machine-readable form. Initially, barcodes represented data by varying the widths, spacings and sizes of parallel lines. These barcodes, now commonly referred to as linear or one-dimensional (1D), can be scanned by special optical scanners, called barcode readers, of which there are several types.

Radio-frequency identification (RFID) uses electromagnetic fields to automatically identify and track tags attached to objects. An RFID system consists of a tiny radio transponder, a radio receiver and transmitter. When triggered by an electromagnetic interrogation pulse from a nearby RFID reader device, the tag transmits digital data, usually an identifying inventory number, back to the reader. This number can be used to track inventory goods.

<span class="mw-page-title-main">BNSF Railway</span> American freight railroad

BNSF Railway is the largest freight railroad in the United States. One of six North American Class I railroads, BNSF has 36,000 employees, 33,400 miles (53,800 km) of track in 28 states, and over 8,000 locomotives. It has three transcontinental routes that provide rail connections between the western and eastern United States. BNSF trains traveled over 169 million miles in 2010, more than any other North American railroad.

<span class="mw-page-title-main">Association of American Railroads</span> Industry trade group representing major North American freight railroads

The Association of American Railroads (AAR) is an industry trade group representing primarily the major freight railroads of North America. Amtrak and some regional commuter railroads are also members. Smaller freight railroads are typically represented by the American Short Line and Regional Railroad Association (ASLRRA), although some smaller railroads and railroad holding companies are also members of the AAR. The AAR also has two associate programs, and most associates are suppliers to the railroad industry.

<span class="mw-page-title-main">Reporting mark</span> Alphabetic code ID used on the North American railroad network

A reporting mark is a code used to identify owners or lessees of rolling stock and other equipment used on certain rail transport networks. The code typically reflects the name or identifying number of the owner, lessee, or operator of the equipment.

ISO 11784 and ISO 11785 are international standards that regulate the radio-frequency identification (RFID) of animals, which is usually accomplished by implanting, introducing or attaching a transponder containing a microchip to an animal.

<span class="mw-page-title-main">Westinghouse Air Brake Company</span> Former American manufacturing company

The Westinghouse Air Brake Technologies Corporation was founded on September 28, 1869 by George Westinghouse in Pittsburgh, Pennsylvania. Earlier in the year he had invented the railway air brake in New York state.

<span class="mw-page-title-main">Ear tag</span> Object attached to a livestock animals ear for identification purposes

An ear tag is a plastic or metal object used for identification of domestic livestock and other animals. If the ear tag uses Radio Frequency Identification Device (RFID) technology it is referred to as an electronic ear tag. Electronic ear tags conform to international standards ISO 11784 and ISO 11785 working at 134.2 kHz, as well as ISO/IEC 18000-6C operating in the UHF spectrum. There are other non-standard systems such as Destron working at 125 kHz. Although there are many shapes of ear tags, the main types in current use are as follows:

Standards for North American railroad signaling in the United States are issued by the Association of American Railroads (AAR), which is a trade association of the railroads of Canada, the US, and Mexico. Their system is loosely based on practices developed in the United Kingdom during the early years of railway development. However, North American practice diverged from that of the United Kingdom due to different operating conditions and economic factors between the two regions. In Canada, the Canadian Rail Operating Rules (CROR) are approved by the Minister of Transport under the authority of the Railway Safety Act. Each railway company or transit authority in Canada issues its own CROR rulebook with special instructions peculiar to each individual property. Among the distinctions are:

<span class="mw-page-title-main">Positive train control</span> Type of train protection system

Positive train control (PTC) is a family of automatic train protection systems deployed in the United States. Most of the United States' national rail network mileage has a form of PTC. These systems are generally designed to check that trains are moving safely and to stop them when they are not.

<span class="mw-page-title-main">Baku–Tbilisi–Kars railway</span> Railway line in Azerbaijan, Georgia, and Turkey

The Baku–Tbilisi–Kars (BTK), or Baku–Tbilisi–Akhalkalaki–Kars railway (BTAK), is a railway connecting Azerbaijan, Georgia and Turkey, which became operational on 30 October 2017 following several years of delays. The project was originally due to be completed by 2010, but was delayed to 2013, 2015, 2016, and, following a fifth trilateral meeting in February 2016, foreign ministers of the three countries announced that the railway would finally be completed in 2017.

<span class="mw-page-title-main">Goods wagon</span> Unpowered railway vehicle used for freight transport

Goods wagons or freight wagons, also known as goods carriages, goods trucks, freight carriages or freight trucks, are unpowered railway vehicles that are used for the transportation of cargo. A variety of wagon types are in use to handle different types of goods, but all goods wagons in a regional network typically have standardized couplers and other fittings, such as hoses for air brakes, allowing different wagon types to be assembled into trains. For tracking and identification purposes, goods wagons are generally assigned a unique identifier, typically a UIC wagon number, or in North America, a company reporting mark plus a company specific serial number.

Janney couplers are a semi-automatic form of railway coupling that allow rail cars and locomotives to be securely linked together without rail workers having to get between the vehicles. They are also known as American, AAR, APT, ARA, MCB, knuckle, Buckeye, tightlock, Henricot or Centre Buffer Couplers.

RFID is a wireless technology supported by many different vendors for tags and readers. In order to ensure global operability of the products multiple test standards have been developed. Furthermore, standardization organizations like ETSI organize RFID Plugtests, where products from multiple vendors are tested against each other in order to ensure interoperability.

<span class="mw-page-title-main">KarTrak</span> Obsolete colored barcode system designed to identify railcars

KarTrak, sometimes KarTrak ACI or just ACI was a colored barcode system designed to automatically identify railcars and other rolling stock. KarTrak was made a requirement in North America in 1967, but technical problems led to the abandonment of the system in the late 1970s.

<span class="mw-page-title-main">David Jarrett Collins</span> American inventor and businessman (1936–2022)

David Jarrett Collins was an inventor and businessman whose career was focused on bringing barcode technology into the mainstream. While at Sylvania in 1960, he led a team that developed the first functional barcode system for tracking railroad cars, and subsequently worked on developing laser barcode systems.

Kavach is an automatic train protection (ATP) system indigenously developed by Indian Railways through Research Designs & Standards Organisation (RDSO). Initial development of Kavach started in 2012 under the name Train Collision Avoidance System (TCAS) and completed development in 2022.

<span class="mw-page-title-main">Bozeman station</span> Former train station in Montana

Bozeman Depot is a former train station in Bozeman, Montana, opened in 1883 by the Northern Pacific Railway. The current brick station house was built in 1892 and expanded in 1924.

References

  1. Welty, Gus (March 1991). "Mandatory AEI tagging?". Railway Age.