Awning

Last updated
Art Nouveau awning in Nancy (France) Porte et marquise CCI Nancy.jpg
Art Nouveau awning in Nancy (France)
City-house with an awning above the entrance, in Bucharest (Romania) 5, Strada Sfantul Stefan, Bucharest (Romania) 1.jpg
City-house with an awning above the entrance, in Bucharest (Romania)
Grand Hotel with numerous awnings in Toledo, Ohio Grand Hotel, Toledo, Ohio - DPLA - bf49ff919e07a698c50339b60b919db3 (page 1) (cropped).jpg
Grand Hotel with numerous awnings in Toledo, Ohio

An awning or overhang is a secondary covering attached to the exterior wall of a building. It is typically composed of canvas woven of acrylic, cotton or polyester yarn, or vinyl laminated to polyester fabric that is stretched tightly over a light structure of aluminium, iron or steel, possibly wood or transparent material (used to cover solar thermal panels in the summer, but that must allow as much light as possible in the winter). The configuration of this structure is something of a truss, space frame or planar frame. Awnings are also often constructed of aluminium understructure with aluminium sheeting. These aluminium awnings are often used when a fabric awning is not a practical application where snow load as well as wind loads may be a factor.

Contents

The location of an awning on a building may be above a window, a door, or above the area along a sidewalk. With the addition of columns an awning becomes a canopy, which is able to extend further from a building, as in the case of an entrance to a hotel. Restaurants often use awnings broad enough to cover substantial outdoor area for outdoor dining, parties, or reception. In commercial buildings, an awning is often painted with information as to the name, business, and address, thus acting as a sign or billboard as well as providing shade, breaking strong winds, and protecting from rain or snow. In areas with wintry weather, most awnings do not have to be taken down at the end of the summer – they can remain retracted against the building all winter long, or be designed and built for those conditions.

History

Ancient world

Awnings were first used by the ancient Egyptian and Syrian civilizations. They are described as "woven mats" that shaded market stalls and homes. A Roman poet Lucretius, in 50 BC, said "Linen-awning, stretched, over mighty theatres, gives forth at times, a cracking roar, when much 'tis beaten about, betwixt the poles and cross-beams".

Among the most significant awnings in the ancient world was the velarium, the massive complex of retractable shade structures that could be deployed above the seating areas of the Roman Colosseum. Made of linen shadecloths, timber framing, iron sockets and rope, the system could effectively shade about one-third of the arena and seating; another third could be shaded by the high surrounding walls, providing a majority of seats some shade on a blinding afternoon. It is believed that sailors, with their background in sailmaking and rigging were employed to build, maintain and operate the velarium. [1]

Early 19th century

Diwan-i-Khas, Red Fort, Delhi with red awnings or shamianas, in 1817 Diwan-i-Khas, Red Fort, Delhi with red awnings or shamianas, in 1817.jpg
Diwan-i-Khas, Red Fort, Delhi with red awnings or shamianas, in 1817

Awnings became common during the first half of the 19th century. At that time they consisted of timber or cast iron posts set along the sidewalk edge and linked by a front cross bar. To lend support to larger installations, angled rafters linked the front cross bar to the building facade. The upper end of the canvas was connected to the facade with nails, with grommets and hooks, or by lacing the canvas to a head rod bolted to the facade. The other (projecting) end of the canvas was draped over or laced to a front bar with the edge often hanging down to form a valance. On ornate examples, metal posts were adorned with filigree and the tops decorated with spear ends, balls or other embellishments. On overcast days or when rain did not threaten, the covering was often rolled up against the building facade; during the winter months proper maintenance called for the removal and storage of awnings. Photographs from the mid-19th century often show the bare framework, suggesting that the covering was extended only when necessary. Canvas duck was the predominant awning fabric, a strong, closely woven cotton cloth used for centuries to make tents and sails.

Awnings became a common feature in the years after the American Civil War. Iron plumbing pipe, which was quickly adapted for awning frames, became widely available and affordable as a result of mid-century industrialization. It was a natural material for awning frames, easily bent and threaded together to make a range of different shapes and sizes. At the same time the advent of the steamship forced canvas mills and sail makers to search for new markets. An awning industry developed offering an array of frame and fabric options adaptable to both storefronts and windows.

Late 19th century

Awnings over windows Building and Power lines.jpg
Awnings over windows

In the second half of the 19th century, manufactured operable awnings grew in popularity. [2] Previously, most awnings had fixed frames-the primary way to retract the covering was to roll it up the rafters by hand. Operable systems for both storefront and window awnings had extension arms that were hinged where they joined the facade. The arms were lowered to project the awning or raised to retract the awning using simple rope and pulley arrangements. Because the canvas remained attached to the framework, retractable awnings allowed a more flexible approach to shading (shopkeepers and owners could incrementally adjust the amount of awning coverage depending upon the weather conditions). When the sun came out from behind clouds, the awning could be deployed with ease. In case of sudden storms, owners could quickly retract the awning against the building wall where it was protected from wind gusts.

Despite their advantages, early operable awnings had drawbacks; when retracted, their cloth coverings often bunched up against the building facade. This left part of the fabric exposed to inclement weather, and deterioration was often accelerated by moisture pooling in the folds of fabric. If poorly designed or badly placed, the retracted fabric could obscure part of the window or door opening, and even if out of the way an imperfectly folded awning presented an unkempt appearance. Modern materials and designs have eliminated all of these issues.

Benefits

Spherical awning of a bandshell Baden-Baden Kurmuschel.jpg
Spherical awning of a bandshell

Retractable awnings let owners control the weather on their own terms. When passing showers threaten, or when the sun gets hot, they or the home automation system unroll the awning for near-instant protection and shade. Lab test measurements show that it can be as much as 10 °C (20 °F) cooler under an awning's canopy. Because awnings prevent the sun from shining through windows and sliding glass doors, they can keep temperatures inside cooler as well, which saves on air-conditioning costs. They can help prevent carpets and furniture from fading in sunlight. Awnings also provide a sheltered place for children and pets to play, shielded from direct sun.

Some of today's awnings also offer accessories that can greatly increase the versatility and usefulness owners get from their decks or patios. A screen room add-on can easily turn an awning into a virtually bug-free outdoor room, side screening cuts down on wind and mist coming under the sides of awnings, and patio lights let people enjoy their decks evenings and nights.

It also can be used to cover the thermal solar panels in the summer.

Types

Actuation

An example of a modern garden awning Ivoryawningl.jpg
An example of a modern garden awning

Today's awnings come in two basic types: manually operated models which are opened by hand and motorized models which operate by electricity. Each offers its own advantages. Benefits include low-cost affordability, easy adaptability to almost any deck or patio, and support arms that can be angled back against the house or set vertically on the deck or patio floor. These arms provide extra support and stability which some owners prefer in windy areas, and increase the awning's versatility by making the attachment of certain accessories available.

Motorized awnings have no vertical supports. Instead, they have retracting lateral arms, creating an unobstructed shaded area. These awnings are operated by an electric motor, generally hidden inside the roller bar of the awning. The arms open and close the awning at the touch of a wireless remote control or a wall-mounted switch.

Modern awnings may be constructed with covers of various types of fabrics, aluminium, corrugated fibreglass, corrugated polycarbonate or other materials. High winds can cause damage to an extended awning, and newer designs incorporate a wind sensor for automatic retraction in certain conditions.

Wind tolerance and construction

Wind tolerance AwningWindTolerance.jpg
Wind tolerance
Design schematics for awning type used at the White House AwningDesign.jpg
Design schematics for awning type used at the White House

Modern awnings are rated for wind tolerance based on width, length, number of supporting arms, and material. Modern awning design incorporates urethane compression joints, steel support structures, and wind sensors. Such designs are currently in use at the White House, Grand Central Station, and the Kremlin.

Aluminium awnings

Aluminium awnings have long been popular in residential applications throughout the world. They are available in many colors and are usually painted with a baked-on enamel paint. Among the many benefits of these awnings are cooler temperatures inside the home, shade for your patio, extending the life of furniture and window treatments. Possibly the most beneficial feature of the awnings are the fact that they have a usable life of well over 40 years.

Some aluminum awnings are designed to be folded down and fastened to protect windows in case of storms such as hurricanes.

Retractable awnings

Retractable awning in Maryland, USA. Retractable awnings.jpg
Retractable awning in Maryland, USA.

Retractable awnings are now becoming very popular with homeowners in the United States. They have been popular in Europe for many years, due to higher energy costs and lack of air conditioning.

Some retractable awnings can include photovoltaic cells or rollable solar panels to generate electricity.

Retractable awnings can include the following types:

Retractable patio cover systems

Retractable patio cover systems are the latest "entry" in to the retractable market. Most of these systems are water-proof as compared to water-resistant (lateral arm awnings) and therefore allow no water penetration through the fabric "roof" section. These systems meet Beaufort scale wind loads up to Beaufort 10 (89–101 km/h or 48–55 kn or 55–63 mph) depending on model and size. Another advantage of retractable patio cover systems is that they can be enclosed on the front and sides using solar shade screens. This allows for an "outdoor room" that can be heated in the winter and air conditioned in the summer.

Retractable lateral arm awnings or folding arm awnings

These are a modern version of the old storefront crank-up awnings of the last century. The two, three or four tension arms (width dependent) and a top tube are supported by a torsion bar. With a Traditional 'Open Style' folding arm awning the torsion bar (also known as square bar) fits into wall or soffit or fascia or roof mounted brackets that spread the load to the wall or roof truss. The newer 'Full Cassette' style of folding arm awning does away with the torsion bar and uses an aluminium extrusion that interlocks with brackets that in-turn spreads the cantilevered force imposed by the awning into the structure it is fitted to. [3] Hand-cranked awnings are still available, but motorized awnings are now most common due to advances in technology, manufacturing & reliability over the last few decades. The motor is inside the roller tube that the fabric rolls around and therefore is not visible. Many motors now have a built-in receiver and are operated by remote control, smartphone, tablet or home automation.

Lateral arm awnings are also known as folding arm, deck or patio awnings, as they can extend / project as far as 5 m (16 ft) and when several awnings are coupled together, can be as wide as 16 m (52 ft) or more – thus covering a large outdoor space. Normally a single folding arm awning can only span 7 m (23 ft) in a single system due to difficulties transporting, storing and powder coating extrusion greater than this size.

The most common fabric choice for folding arm awning is solution dyed acrylic fabric that comes in a variety of styles, colours, patterns as well as performance grades for water repellence and fire retardancy. Solution dyed acrylic fabric is the most suitable fabric for use in these awnings due to dimensional properties, ease of manufacturing, weight (versus woven mesh) & high levels of filtering of and resistance against UV.

Retractable side or drop arm awnings

Rigid shop awnings. White Center 02.jpg
Rigid shop awnings.

Commonly used to shade a window, with a roller tube at the top, spring-loaded side arms, and a motor, crank or tape-pull operator. Awnings with sides are commonly known as traditional style awnings as they have been used for many years dating back to the early 19th century using cotton canvas fabric. Canvas was replaced in the 1960s by more acrylic materials and polyester in more recent times driven by a focus on the environment. Traditional style awnings are appropriate for historical buildings and are still popular today using a more weather resistant fabric and a rope and pulley system for retracting the awnings. [4] Awnings without sides do not provide as much sun protection as those with sides. Awnings without sides come in many different styles. Drop Arm Awnings without sides come with roller tubes at the top and are available with motors and wind sensors for automatic retraction. Spear Awnings are made without sides and are made with Wrought Iron Frames and they can be retracted with a rope and pulley system but are not available with motors.

Awnings with sides provide the best sun protection for east and west facing windows. North and South facing windows can be protected from the sun with awnings without sides. Awnings provide shade keeping your house cooler, awnings are also great shade creators around porches, decks and patios.

Portable, pop-up canopies

A portable pop-up canopy or tent provides a cost-effective temporary solution to people who want to enjoy shade. The portable designs offer versatility to take the unit to social events. The frame usually incorporates an accordion-style truss which folds up compactly.

Retractable solar shade screens

Shade screens utilize acrylic canvas or a mesh fabric, which allows some view-through while blocking the sun's rays. The roller at the top may be hand-cranked or motorized. [5] The fabric is gravity-fed, with a weighted bottom rail pulling the fabric down between guide rails or guy wires. Exterior shades are much more effective at blocking heat than interior shades, since they block the heat before it enters the glass. [6] This style of framed screen is typically done by professional installers, because of the specialized frames and tools required. A recent advancement is frame-less shade screens, which allows a "DIY-er" to install their own exterior shades. Solar shade screens can also be installed at the end of awnings to provide horizontal shade during early morning or late afternoon sun positions.

Retractable solar window awnings

Retractable solar window awnings are made from fabric. They are resistant to hail and harsh winter weather. Many solar window awnings can be programmed to open and close automatically in response to the sun.

Shade sails

Shade sails provide semi-horizontal shading. They can be demounted with some difficulty and are usually left in place year round. Retractable versions also exist, with greater cost but also greater utility, as they can be retracted to admit winter sun if required.

Classification numbers

Construction Specifications Institute (CSI) Division 10 MasterFormat 2004 Edition:

CSI MasterFormat 1995 Edition:

See also

Related Research Articles

<span class="mw-page-title-main">Sextant</span> Tool for angle measurement

A sextant is a doubly reflecting navigation instrument that measures the angular distance between two visible objects. The primary use of a sextant is to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation.

<span class="mw-page-title-main">Window</span> Opening to admit light or air

A window is an opening in a wall, door, roof, or vehicle that allows the exchange of light and may also allow the passage of sound and sometimes air. Modern windows are usually glazed or covered in some other transparent or translucent material, a sash set in a frame in the opening; the sash and frame are also referred to as a window. Many glazed windows may be opened, to allow ventilation, or closed, to exclude inclement weather. Windows may have a latch or similar mechanism to lock the window shut or to hold it open by various amounts.

<span class="mw-page-title-main">Passive solar building design</span> Architectural engineering that uses the Suns heat without electric or mechanical systems

In passive solar building design, windows, walls, and floors are made to collect, store, reflect, and distribute solar energy, in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design because, unlike active solar heating systems, it does not involve the use of mechanical and electrical devices.

<span class="mw-page-title-main">Convertible</span> Vehicle with a folding or removable roof

A convertible or cabriolet is a passenger car that can be driven with or without a roof in place. The methods of retracting and storing the roof vary among eras and manufacturers.

<span class="mw-page-title-main">Tent</span> Temporary shelter which can be easily dismantled and which is portable

A tent is a shelter consisting of sheets of fabric or other material draped over, attached to a frame of poles or a supporting rope. While smaller tents may be free-standing or attached to the ground, large tents are usually anchored using guy ropes tied to stakes or tent pegs. First used as portable homes by nomads, tents are now more often used for recreational camping and as temporary shelters.

<span class="mw-page-title-main">Window blind</span> Type of window covering

A window blind is a type of window covering. There are many different kinds of window blinds which use a variety of control systems. A typical window blind is made up of several long horizontal or vertical slats of various types of hard material, including wood, plastic or metal which are held together by cords that run through the blind slats. Vertical blinds run along a track system which can tilt open and closed and move side-to-side. Window blinds can be manoeuvred with either a manual or remote control by rotating them from an open position, with slats spaced out, to a closed position where slats overlap and block out most of the light. There are also several types of window coverings, called shades, that use a single piece of soft material instead of slats.

<span class="mw-page-title-main">Hurricane shutter</span>

Hurricane coverings, commonly known as shutters, are used in hurricane mitigation to protect houses and other structures from damage caused by storms. Hurricane shutters are used to prevent windows from being broken by flying objects during a storm. Although the negative pressure caused by high-speed wind flowing over a building roof can cause the roof to fail with the building envelope intact, broken windows allow the air pressure to rise inside a building, creating an even greater pressure difference and increasing the likelihood of roof failure.

<span class="mw-page-title-main">Tonneau</span> Open automotive bed

A tonneau, bed or tray is an area of a car or truck open at the top. It can be for passengers or cargo.

<span class="mw-page-title-main">Window shutter</span>

A window shutter is a solid and stable window covering usually consisting of a frame of vertical stiles and horizontal rails. Set within this frame can be louvers, solid panels, fabric, glass and almost any other item that can be mounted within a frame. Shutters may be employed for a variety of reasons, including controlling the amount of sunlight that enters a room, to provide privacy, security, to protect against weather or unwanted intrusion or damage and to enhance the aesthetics of a building.

<span class="mw-page-title-main">Sunroom</span> Room with large glass windows or walls for exposure to sunlight

A sunroom, also frequently called a solarium, is a room that permits abundant daylight and views of the landscape while sheltering from adverse weather. Sunroom and solarium have the same denotation: solarium is Latin for "place of sun[light]". Solaria of various forms have been erected throughout European history. Currently, the sunroom or solarium is popular in Europe, Canada, the United States, Australia, and New Zealand. Sunrooms may feature passive solar building design to heat and illuminate them.

<span class="mw-page-title-main">Canopy (architecture)</span> Structure providing shade or shelter

A canopy is an overhead roof or else a structure over which a fabric or metal covering is attached, able to provide shade or shelter from weather conditions such as sun, hail, snow and rain. A canopy can also be a tent, generally without a floor. The word comes from the ancient Greek κωνώπειον, from κώνωψ, which is a bahuvrihi compound meaning "mosquito". The first 'o' changing into 'a' may be due to influence from the place name Canopus, Egypt thought of as a place of luxuries.

Marine canvas refers to a varied array of fabrics used in the fabrication and production of awnings, covers, tarps, sunshades, signs and banners for the advertising, boating, trucking, tenting, structural and medical industries. The term "marine canvas" is also used more narrowly to refer specially to boat cover products.

<span class="mw-page-title-main">Volkswagen Westfalia Camper</span> Conversion of Volkswagen Type 2

The Volkswagen Westfalia Camper was a conversion of the Volkswagen Type 2, and then, the Volkswagen Type 2 (T3), sold from the early 1950s to 2003. Volkswagen subcontracted the modifications to the company Westfalia-Werke in Rheda-Wiedenbrück.

<span class="mw-page-title-main">Screen door</span>

A screen door can refer to a hinged storm door or hinged screen door covering an exterior door, or a screened sliding door used with sliding glass doors. A screen door incorporates screen mesh to block birds, flying insects or airborne debris such as seeds or leaves from entering, and pets and small children from exiting interior spaces, while allowing for air, light, and views.

SunSetter Products LP is an American manufacturer of awnings and retractable screens. SunSetter claims to have approximately a third of the United States awning marketshare.

<span class="mw-page-title-main">Uni-Systems</span>

Uni-Systems, LLC is a design, construction, and manufacturing firm located in Minneapolis, Minnesota specializing in kinetic architecture, or movable, mechanized structures. Uni-Systems has been involved in the construction of five of the seven sports stadiums incorporating retractable roofs in North America since 1999.

<span class="mw-page-title-main">Margot and Bill Winspear Opera House</span> Opera house in downtown Dallas, Texas

The Margot and Bill Winspear Opera House is an opera house located in the Arts District of downtown Dallas, Texas (USA).

<span class="mw-page-title-main">Photovoltaic mounting system</span>

Photovoltaic mounting systems are used to fix solar panels on surfaces like roofs, building facades, or the ground. These mounting systems generally enable retrofitting of solar panels on roofs or as part of the structure of the building. As the relative costs of solar photovoltaic (PV) modules has dropped, the costs of the racks have become more important and for small PV systems can be the most expensive material cost. This has caused an interest in small users deploying a DIY approach. Due to these trends, there has been an explosion of new racking trends. These include non-optimal orientations and tilt angles, new types of roof-mounts, ground mounts, canopies, building integrated, shading, vertical mounted and fencing systems.

<span class="mw-page-title-main">Skylight</span> Window in the ceiling-roof

A skylight is a light-permitting structure or window, usually made of transparent or translucent glass, that forms all or part of the roof space of a building for daylighting and ventilation purposes.

<span class="mw-page-title-main">Medina Haram Piazza</span> All weather prayer cover

Medina Haram Piazza Shading Umbrellas or Al-Masjid An-Nabawi Umbrellas are convertible umbrellas erected at the piazza of Al-Masjid an-Nabawi in Medina, Saudi Arabia. The shade of the umbrella is spread in the four corners, and the area covered by the shade extends to 143,000 square meters. These umbrellas are aimed to protect worshipers from the heat of the sun during prayer, as well as from the risk of slipping and falling in the event of rain. Similar structures are built at the square of the mosques worldwide. At Al-Masjid An-Nabawi, there are a total of 250 umbrellas.

References

  1. Alchin, Linda (2008). "Awning at the Colosseum". Roman Colosseum website. Linda K. Alchin. Archived from the original on 29 August 2011. Retrieved 9 May 2012.
  2. "A Brief History of Awnings. From the Ancient to the Modern". Appeal Group. 2022-03-02. Retrieved 2022-05-17.
  3. "Construct folding arm style awnings". Department of Education, Skills and Employment Austria.
  4. "The Use of Awnings on Historic Buildings, Repair, Replacement and New Design". U.S. Department of the Interior.
  5. "Wintergartenbeschattung" (in German). Metallbau Görres. 4 February 2021.
  6. "Energy Efficient Window Coverings". Office of Energy Efficiency & Renewable Energy.