Baganda music

Last updated
A blind Buganda harpist c. 1911 Blind Baganda Harpist.jpg
A blind Buganda harpist c. 1911

Baganda music is a music culture developed by the people of Uganda with many features that distinguish African music from other world music traditions. Parts of this musical tradition have been extensively researched and well-documented, with textbooks documenting this research. Therefore, the culture is a useful illustration of general African music.

Contents

Musical instruments

In addition to voice, a range of instruments are used, including the Amadinda, the Akadinda xylophones, the Ennanga harp, the Etongoli lyre, drums, and the Kadongo (plural "budongo") lamellophone.

Amadinda, akadinda, ennanga, and entongoli, as well as several types of drums, are used in the courtly music of the Kabaka, the king of Buganda. The kadongo, on the other hand, was more recently introduced to Baganda music, dating to the early 20th century. For this reason, budongo music is not part of the traditional court music.

Musical scale

Baganda music is based on an approximately equidistant pentatonic scale. Therefore, the octave (mwànjo, plural myanjo) is divided into five intervals of approximately 240 cents (2.4 semitones). There is some variation in the interval length between instruments, and it even might vary in one (tunable) instrument during a performance. This means that in an emic description, the scale can be called an equipentatonic scale while on an etic level of description, there might be different variations of implementing that conceptual scale.

Because this music is not harmony-based, chords are not used and only the octaves are consonant.

In Baganda culture, like in many African cultures, the musical scale is not perceived as pointing from "low" to "high" tones but the other way around, from "small" to "large" or "big" tones. Despite this, the notation (created by European ethnomusicologists) used for the music denotes the deepest tone as "1" and the highest as "5".

Timbre

As in many African cultures, there is a preference in Baganda music for "noisy" timbres. In the Kadongo lamellophone, metal rings are put around the lamellas to create a buzzing sound. In the ennanga harp, scales of a kind of goana are fixed on the instrument in such a way that the vibrating strings will touch it. This gives a crackling timbre to the sound. In tuning the instruments (including the xylophones), the octave is often deliberately not tuned exactly, resulting in an intended acoustic beat effect. In singing, "coarse" timbres are often used.

Form numbers

The music is generally repetitive. The elementary pulses in the music are quite fast. There are different form numbers, i.e., number of elementary pulses in one cycle, in Baganda music. Besides the more usual 24, 36 and 48 (multiples of 12), which are widespread in African music, there are also instances of unusual form numbers: the amadinda piece "Bakebezi bali e Kitende" has 50, the pieces "Ab'e Bukerere balaagira emwanyi" and "Akawologoma" have 54 and the piece "Agenda n'omulungi azaawa" has a rare form number of 70.

Inherent patterns

Much of the music is based on playing parallel octaves. For example, on the amadinda, two musicians play parallel octaves in an interlocking fashion, i.e. the tones played by one musician fall exactly between those played by the other musicians. Both musicians play parallel octaves, moving their right hand and left hand in parallel within a distance of five xylophone bars. In perception, neither the pattern played by one nor the pattern played by the other musician is perceived, and although the parallel octaves can be heard, they are hardly noticeable. Instead, perceptually, the music seems to consist of two to three pitch levels in which irregular melodic/rhythmic inherent patterns can be heard. The inherent patterns in the middle pitch level combine out of low pitch notes of the higher octave and high pitch notes of the lower octave. Generally, the patterns that can be heard are not played by any of the musicians but result from the combination of the actions of both musicians. Sometimes several conflicting ways of hearing patterns are present, and perception might switch between them. The musicians can influence this by accentuating certain notes.

Relationship between the instruments

There are close relationships between music of both the ennanga and entongoli, and the amadinda. Pieces for the string instruments can be translated to the xylophone. The part for the right hand is assigned to one musician and the part for the left hand is assigned to another. The ennanga has only eight strings, so parallel octaves can only be played within a restricted interval, but the general compositional principles applying to the xylophone music are the same in the chord instruments.

Music and language

Luganda is a tonal language. As with many other African musical cultures, the language significantly influences the music. The composer usually starts with the lyrics. The text's progression of tones partly determines the possible melodies of the song. He then composes a tune that fits the song's melodic pattern. When the music is played, inherent patterns may appear, which, to native speakers, may evoke new text associations. These might belong to totally different semantic areas, creating a strong poetic effect. Sometimes, such text associations "suggested" by the music are included in the sung text. However, they might be present for the Luganda speaker even if not made explicit in the text, adding an aesthetic level to the music that is only accessible to someone knowing conversant in the language.

The names of musical compositions often refer to the text that can be associated with the music. Moreover, mnemonic phrases are often used to memorize the sometimes long and irregular sequences of notes in xylophone playing.

Amadinda music

Cultural and historical background

The instrument

The amadinda is a xylophone of the type called log xylophone. It consists of 12 wooden bars placed on two fresh banana stems. Sticks are inserted into the stems as separators between the bars. The bars are normally made from the wood of the Lusamba tree (Markhamia plarycalyx).

Basics of Amadinda playing

The amadinda (or madinda) is played by three musicians called omunazi, omwawuzi and omukoonezi, respectively. One of these sits on one side of the Xylophone, the other two on the other. Different seating arrangements are possible.

The music is always started by the omunazi. The omwawuzi then comes in, putting his notes exactly between those of the omunazi. The part of the omunazi is called okunaga, the part of the omwawuzi is called okwawula.

The following example shows the parts of the piece "Olutalo olw'e Nsinsi" (The battle of Nsinsi), a piece where the okwawula part is relatively simple. The form number of this piece is 24, i.e., one cycle has a total length of two times 12. Both musicians play parallel octaves on the first ten bars or the Amadinda, so in the following numerical notation, "1" means hitting the first (deepest) bar plus the sixth one together, and so on.

Okunaga 4.3.4.3.3.3.4.3.4.4.2^2.
Okwawula 5.2.1.5.2.1.5.2.1.5.2.1

The "^" denotes the place where the okwawula part starts—this entry point may be elsewhere in other compositions. The resulting sequence is 413542313532413542412522. This sequence is repeated, possibly many times.

The third musician, the omukoonezi, repeats the pattern occurring on the lowest two bars (the amatengezzi) two octaves higher on the highest two bars (the amakoonezi). The omukoonezi starts on the "2" of the okwawula. So, in this case, this pattern, called okukoonera is:

2.1...2.1...2.12.22..1...

The okukoonera is what would be heard on these two plates if the amadinda was extended by additional octaves played by another pair of omunazi and omwawuzi. So, one could also think of the omukoonezi of "simulating" the actions of two additional musicians. When listening to the music, one can perceive the okukoonera as a separate pattern, but it might also combine with notes played on the adjacent bars to form other audible patterns.

Adding drums

Playing techniques and terminology

The amadinda, like other types of south Ugandan Xylophones, is played by hitting the bars at the end with a stick. The tip of the bar is hit with the middle of the stick in an angle of about 45 degrees. The hands are moved in parallel. The movement should come from the wrist, and the arms should be moved as little as possible. The correct way of playing the amadinda is called Okusengejja, literally "to strain, to filter, to clarify, to sort things out". There are special techniques are used only by master players.

There are several ways of playing Amadinda which are considered mistakes:

Miko transpositions

Miko (singular Muko) are transpositions of a piece by one step of the scale (up or down). The whole melody is shifted up or down one xylophone bar: 1 is replaced by 2, 2 by 3, 3 by 4, 4 by 5 and 5 by 1. Although in the middle of the xylophone, the structure of the piece remains the same, the movement patterns of the musicians are changed, and the okukoonera part may become completely different. In fact, this way, from each piece of the total repertoire of 50 different compositions, 4 more pieces can be derived, giving a total of 250 pieces.

Repertoire

There are 50 different Amadinda pieces, not counting the miko transpositions. Their names are:

Form number 24 (2 x 12):

* Banno bakkola ng'osiga  * Ndyegulira ekkadde  * Ekyuma ekya Bora  * Abaana ba Kalemba besibye bulungi  * Segomba ngoye Mwanga alimpa  * Ennyana ekutudde  * Olutalo olw'e Nsisi  * Wavvangaya  * Omunyoro atunda nandere  * Title unknown

Form number 36 (2 x 18):

* Ssematimba ne Kikwabanga  * Naagenda kasana nga bulaba  * Omusango gwa'abelere  * Omuwabutwa wakyeejo  * Mawasansa  * Alifuledi  * Omutamanya n'gamba  * Katulye ku bye pesa  * Ganga alula  * Balangana  enkonge  * Byasi byabuna olugudo  * Ab'e Busoga begaala ngabo  * Nanjobe  * Mugowa Iwatakiise  * Gulemye Mpagala  * Mawanda segwanga  * Ebigambo ebibulire bitta enyumba  * Walugembe eyava oKunywa  * Omujooni: Balinserekerera balinsala ekyambe  * Lutaaya yesse yekka  * Kawumpuli  * Abalung'ana be baleta engoye 

Form number 48 (2 x 24):

* Atalabanga mudnu agende Buleega  * Ezali embikke kasagazi kawunga  * Kalagala e Bembwe  * Semakookiro ne Jjunju  * Agawuluguma ennyanja  * Akaalo kekamu  * Afa talamusa  * Okuzanyira ku nyanja kutunda mwooyo  * Ngabo Maanya eziriwangula Mugerere  * Ensiriba ya munange Katego  * Atakulubere  * Nkejje namuwanula  * Kansimbe omuggo awali Kibuka  * Omukazi omunafu ngayigga na ngabo 

Other form numbers (these form numbers are very unusual in African music):

* Bakebezi bali e Kitende form number 50 (2 x 25)  * Ab'e Bukerere balaagira mwanyi form number 54 (2 x 27)  * Akawologoma form number 54 (2 x 27)  * Agenda n'omulungi azaawa form number 70 (2 x 35)

Numerical scores of all of these compositions have been published by Gerhard Kubik (s. References).

Well known Amadinda musicians

Research on Amadinda music

Amadinda music in East African and multi-cultural education

Akadinda music

Comparison with other music cultures

Busoga (Embaire music)

The Embaire is the Xylophone played in Busoga sub-region. [1] [2] The Embaire was described by Mark Stone, a lecturer at Oakland University and a former Rotary Ambassadorial Scholar at Makerere University during the 1996–1997 school year in these words: The Embaire is the most communal and most powerful xylophone tradition I know, a tradition that I am fortunate to teach regularly to my students at Oakland University in a number of classes [3] [4]

Embaire keys are made from ensambiya wood (Bignoniaceae: Markhamia platycalyx), [5] and played by beating the ends of the keys with sticks from a heavier wood called enzo (Rutaceae: Teclea nobilis [6] ). The keys are laid on felled banana stems, making an instrument which spans about 2.5m from end to end. The bass keys are large and broad but relatively thin. Wherever the instrument is played, a hole about 2 metres long and half a metre deep is first dug in the ground under the area where the bass keys will lie (the bottom ten keys of the Nakibembe instrument), to provide resonance: this chamber is sealed at the bottom end of the instrument with the base of a banana frond packed around with some of the excavated earth. In contrast to other parts of Uganda, Several impressive music groups with embaire xylophones are located relatively easily in Iganga district, Busoga. [7]

Parallels outside Uganda

Like the Amadinda music, the Timbrh (timbili) lamellophone music of the Vute of central Cameroon is based on playing parallel Octaves, resulting in inherent patterns. This striking similarity provides some evidence that the principles underlying both forms of music might go back to ancient times.

Recordings

Related Research Articles

<span class="mw-page-title-main">Xylophone</span> Wooden keyboard percussion instrument

The xylophone is a musical instrument in the percussion family that consists of wooden bars struck by mallets. Like the glockenspiel, the xylophone essentially consists of a set of tuned wooden keys arranged in the fashion of the keyboard of a piano. Each bar is an idiophone tuned to a pitch of a musical scale, whether pentatonic or heptatonic in the case of many African and Asian instruments, diatonic in many western children's instruments, or chromatic for orchestral use.

<span class="mw-page-title-main">Marimba</span> Wooden keyboard percussion instrument

The marimba, is a musical instrument in the percussion family that consists of wooden bars that are struck by mallets. Below each bar is a resonator pipe that amplifies particular harmonics of its sound. Compared to the xylophone, the marimba has a lower range. Typically, the bars of a marimba are arranged chromatically, like the keys of a piano. The marimba is a type of idiophone.

<span class="mw-page-title-main">Glockenspiel</span> Mallet percussion instrument

The glockenspiel or bells is a percussion instrument consisting of pitched aluminum or steel bars arranged in a keyboard layout. This makes the glockenspiel a type of metallophone, similar to the vibraphone.

<span class="mw-page-title-main">Mbira</span> African musical instrument of the lamellophone family

Mbira are a family of musical instruments, traditional to the Shona people of Zimbabwe. They consist of a wooden board with attached staggered metal tines, played by holding the instrument in the hands and plucking the tines with the thumbs, the right forefinger, and sometimes the left forefinger. Musicologists classify it as a lamellaphone, part of the plucked idiophone family of musical instruments. In Eastern and Southern Africa, there are many kinds of mbira, often accompanied by the hosho, a percussion instrument. It is often an important instrument played at religious ceremonies, weddings, and other social gatherings. The "Art of crafting and playing Mbira/Sansi, the finger-plucking traditional musical instrument in Malawi and Zimbabwe" was added to the UNESCO Representative List of the Intangible Cultural Heritage of Humanity in 2020.

Given the vastness of the African continent, its music is diverse, with regions and nations having many distinct musical traditions. African music includes the genres amapiano, jùjú, fuji, afrobeat, highlife, Congolese rumba, soukous, ndombolo, makossa, kizomba,Taarab and others. African music also uses a large variety of instruments from all across the continent. The music and dance of the African diaspora, formed to varying degrees on African musical traditions, include American music like Dixieland jazz, blues, jazz, and many Caribbean genres, such as calypso and soca. Latin American music genres such as cumbia, salsa music, son cubano, rumba, conga, bomba, samba and zouk were founded on the music of enslaved Africans, and have in turn influenced African popular music.

In music, an ostinato is a motif or phrase that persistently repeats in the same musical voice, frequently in the same pitch. Well-known ostinato-based pieces include classical compositions such as Ravel's Boléro and the Carol of the Bells, and popular songs such as Donna Summer and Giorgio Moroder's "I Feel Love" (1977), Henry Mancini's theme from Peter Gunn (1959), The Who's "Baba O'Riley" (1971), The Verve's "Bitter Sweet Symphony" (1997), and Flo Rida's "Low" (2007).

Music for 18 Musicians is a work of minimalist music composed by Steve Reich during 1974–1976. Its world premiere was on April 24, 1976, at The Town Hall in the Midtown Manhattan Theater District. Following this, a recording of the piece was released on the ECM New Series in 1978.

<span class="mw-page-title-main">Music of Uganda</span>

Uganda, is now ranked number three in Africa as far as music and entertainment is concerned. Uganda is home to over 65 different ethnic groups and tribes, and they form the basis of all indigenous music. The Baganda, being the most musically vibrant nationality in the country, has defined what constitutes culture and music of Uganda over the last two centuries.

<span class="mw-page-title-main">Lamellophone</span> Class of musical instruments

A lamellophone is a member of the family of musical instruments that makes its sound by a thin vibrating plate called a lamella or tongue, which is fixed at one end and has the other end free. When the musician depresses the free end of a plate with a finger or fingernail, and then allows the finger to slip off, the released plate vibrates. An instrument may have a single tongue or a series of multiple tongues.

<span class="mw-page-title-main">Music of the Republic of the Congo</span> Overview of musical traditions in Congo-Brazzaville

The Republic of the Congo is an African nation with close musical ties to its neighbor, the Democratic Republic of the Congo. The Democratic Republic of the Congo's homegrown pop music, soukous, is popular across the border, and musicians from both countries have fluidly travelled throughout the region playing similarly styled music, including Nino Malapet and Jean Serge Essous. Brazzaville had a major music scene until unrest in the late 1990s, and produced popular bands like Extra Musica and Bantous de la Capitale that played an integral role in the development of soukous and other styles of Congolese popular music. The Hip-Hop group "Bisso na Bisso" also hails from Congo-Brazzaville.

<span class="mw-page-title-main">Level (music)</span>

A level, also "tonality level", Gerhard Kubik's "tonal step," "tonal block," and John Blacking's "root progression," is an important melodic and harmonic progression where melodic material shifts between a whole tone above and a whole tone below the tonal center. This shift can occur to both neighboring notes, in either direction, and from any point of departure. The steps above and below the tonic are often called contrasting steps. A new harmonic segment is created which then changes the tonality but not necessarily the key.

James K. Makubuya is an ethnomusicologist, instrumentalist, singer, dancer, and choreographer. He plays several traditional instruments from various parts of Uganda, including the endongo and adungu, endingidi, amadinda, akogo (lamellaphone), and engoma (drums).

<span class="mw-page-title-main">Roneat ek</span> Musical instrument

The Roneat Ek or Roneat Aek is a xylophone used in the Khmer classical music of Cambodia. It is built in the shape of a curved, rectangular shaped boat. It has twenty-one thick bamboo or hard wood bars that are suspended from strings attached to the two walls. They are cut into pieces of the same width, but of different lengths and thickness. Originally these instruments were highly decorated with inlay and carvings on the sides of the sound box. Now they are simpler. The Roneat is played in the Pinpeat ensemble. In that ensemble, sits on the right of the Roneat Thung, a lower-pitched xylophone. The roneat ek is the analogous equivalent to the Thai xylophone called ranat ek, and the Burmese bamboo xylophone called "pattala".

<span class="mw-page-title-main">African harp</span> Plucked string instrument

African Harps, particularly arched or "bow" harps, are found in several Sub-Saharan African music traditions, particularly in the north-east. Used from early times in Africa, they resemble the form of harps in ancient Egypt with a vaulted body of wood, parchment faced, and a neck, perpendicular to the resonant face, on which the strings are wound.

<span class="mw-page-title-main">Bell pattern</span> Rhythmic pattern of striking a hand-held bell or other instrument

A bell pattern is a rhythmic pattern of striking a hand-held bell or other instrument of the idiophone family, to make it emit a sound at desired intervals. It is often a key pattern, in most cases it is a metal bell, such as an agogô, gankoqui, or cowbell, or a hollowed piece of wood, or wooden claves. In band music, bell patterns are also played on the metal shell of the timbales, and drum kit cymbals.

Kadongo Kamu is a music genre native to Uganda and is the oldest mainstream music genre in the country. The word "kadongo kamu" is a term in the Ganda language that means "one little guitar". To understand why the genre has this name, one has to understand the stylistic structure of the music which is created with only one acoustic guitar, a dry acoustic non-electric six-string guitar. But this is not always the case and many times other instruments are involved. However the true style of the music relies only on one acoustic guitar as instrumentation, hence the "one little guitar" name.

Kidandali is a stylistic music genre featuring the use of native sounds and samples from Uganda. Kidandali is a word from the Ganda language which in translation can mean "local party" or "celebration". Music concerts and traditional wedding ceremonies (kwanjula) are examples of such "bidandali". The music itself is given this name because most times it is the kind of music played or performed at such local parties and functions. Some other sources and commentators refer to the genre alternatively as "Band music" while others refer to it as "afrobeat".

Traditional sub-Saharan African harmony is a music theory of harmony in sub-Saharan African music based on the principles of homophonic parallelism, homophonic polyphony, counter-melody and ostinato-variation. Polyphony is common in African music and heterophony is a common technique as well. Although these principles of traditional African music are of Pan-African validity, the degree to which they are used in one area over another varies. Specific techniques that used to generate harmony in Africa are the "span process", "pedal notes", "rhythmic harmony", "harmony by imitation", and "scalar clusters".

Bigwala is a genre of ceremonial music and dance of the Busoga Kingdom in Uganda centered around gourd trumpets.

<span class="mw-page-title-main">Timbrh</span> Lamellophone

Timbrh is an instrument belonging in lamellophone class, traditional to the Mambila people of Cameroon. The wooden base are generally made of thin woods or hollow raffia palm stems. The lamellas of timbrh, which can be in numbers up to 20, consists of hard leaf veins of raffia palms. It also features a triangular soundholes. In a typical dance accompaniment ensemble, three to four timbrh play together. A variant with a smaller box is only used as a solo. In an older, now obsolete version of the timbrh, the lamellae were attached to two parallel connected raffia leaf ribs cut in half.

References

  1. Busoga sub-region
  2. Pier, David G., 1975- author. (25 October 2015). Ugandan music in the marketing era : the branded arena. ISBN   978-1-137-54939-6. OCLC   908286948.{{cite book}}: |last= has generic name (help)CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)
  3. "Mark Stone - percussionist, composer, educator | Global Soundscapes | Embaire xylophone". markstonepercussion.com.
  4. "Mudondo - Embaire Xylophone at Oakland University". YouTube . Archived from the original on 2021-12-19.
  5. "Global Plants".
  6. "Global Plants".
  7. Micklem, James; Cooke, Andrew; Stone, Mark (1999). "Xylophone Music of Uganda: The Embaire of Nakibembe, Busoga". African Music. 7 (4): 29–46. doi: 10.21504/amj.v7i4.1996 . JSTOR   30249819.
  8. Baganda music at AllMusic