Related Research Articles
The Bensen B-8 is a small, single-seat autogyro developed in the United States in the 1950s. Although the original manufacturer stopped production in 1987, plans for homebuilders are still available as of 2019. Its design was a refinement of the Bensen B-7, and like that aircraft, the B-8 was initially built as an unpowered rotor-kite. It first flew in this form in 1955, and on 6 December a powered version, designated B-8M first flew. The design proved to be extremely popular and long-lasting, with thousands of sets of plans sold over the next thirty years.
The Duruble Edelweiss is a light utility aircraft designed in France in the early 1960s and marketed for homebuilding. It is a low-wing cantilever monoplane with retractable tricycle undercarriage and all-metal construction. The aircraft was designed for a load factor of 9. Two- and four-seat versions were designed. The aircraft's creator, Roland Duruble flew the first example, a two-seater designated RD-02 in 1962, and in 1970 began to market plans for a stretched version with a rear bench seat as the RD-03. Over the next 15 years, 56 sets of plans had been sold, and at least nine Edelweisses finished and flown. In the 1980s, Duruble marketed an updated version of his original two-seater as the RD-02A, and sold around seven sets of plans, with at least one aircraft flying by 1985.
The Smyth Model S Sidewinder is an all-metal, two-seat side-by-side, low-wing homebuilt aircraft, designed and developed in the United States.
The MacFam Cavalier is a homebuilt aircraft designed by Stan McLeod, developed through a progressing series of models, all using all-wooden construction. The model range includes the SA102, SA102.5, SA103, SA104 and the SA105.
The Aristocraft II was a six-place homebuilt aircraft designed by Terrence O'Neill.
The Sport Copter 2 is an American two-seat autogyro designed and built by Sport Copter of Scappoose, Oregon. Made of bolted dural tubes and a carbon fiber shell, the Sport Copter 2 is a fully enclosed autogyro with removable doors and side-by-side seating for two. The prototype was powered by a 160 hp (119 kW) Subaru 2.2-litre 4-cylinder engine, but was subsequently upgraded to the Lycoming IO360. The Lycoming IO320 may also be fitted.
The Sport Copter Lightning is an American autogyro, designed and produced by Sport Copter of Scappoose, Oregon. The aircraft is supplied as a kit for amateur construction.
The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction.
The ArrowCopter is a series of Austrian autogyros, designed and produced by FD-Composites GmbH of Zeillern. When it was in production the ArrowCopter AC20 series was supplied as complete, factory built, ready-to-fly-aircraft.
The Shirlen Big Cootie is an American homebuilt biplane that was designed by Roy Shirlen.
The S-M-J Maverick I is an American aircraft designed for homebuilt construction.
The Grudieaire GH-4 is an American autogyro that was designed for homebuilt construction.
The Hilman Hornet is a two place homebuilt helicopter.
The St Croix Sopwith Triplane is an American homebuilt aircraft that was designed and produced by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. The aircraft is a full-size replica of the 1916 Sopwith Triplane fighter aircraft.
The SkyDancer SD-260 was an American aerobatic Homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.
The Ultimate 10-200 is a Canadian homebuilt aerobatic biplane that was designed produced by Streamline Welding of Hamilton, Ontario, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Warner Revolution II, also marketed as the Space Walker II, is an American homebuilt aircraft that was designed and produced by Warner Aerocraft of Seminole, Florida. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Farrington Twinstar is an American two-seat autogyro that was designed and produced by Farrington Aircraft of Paducah, Kentucky, a company owned by Don Farrington. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Bede BD-12 was an American homebuilt aircraft designed by Jim Bede and produced by Bede Aircraft of Medina, Ohio, introduced in the 1990s. The aircraft was intended to be supplied as a kit for amateur construction, but only one was ever built.
The Brutsche Freedom 210 STOL was a proposed American STOL homebuilt aircraft that was designed by Neal H. Brutsche and intended to be produced by Brutsche Aircraft Corporation of Salt Lake City, Utah, introduced in the mid-1990s. The aircraft was planned to be supplied as a kit for amateur construction.