Batman: The Ride (Six Flags México)

Last updated
Batman: The Ride
Six Flags Mexico - panoramio.jpg
Six Flags Mexico
Location Six Flags Mexico
Coordinates 19°17′43″N99°12′23″W / 19.2952°N 99.2065°W / 19.2952; -99.2065 Coordinates: 19°17′43″N99°12′23″W / 19.2952°N 99.2065°W / 19.2952; -99.2065
StatusOperating
Opening dateApril 14, 2000
General statistics
Type Steel  Inverted
Manufacturer Vekoma
Lift/launch systemChain lift hill
Height109.3 ft (33.3 m)
Length2,260.5 ft (689.0 m)
Speed49.7 mph (80.0 km/h)
Inversions 5
Duration1:36
Capacity1,040 riders per hour
Height restriction51 in (130 cm)
Trains2 trains with 10 cars. Riders are arranged 2 across in a single row for a total of 20 riders per train.
Batman: The Ride at RCDB
Pictures of Batman: The Ride at RCDB

Batman: The Ride is a steel inverted coaster at Six Flags Mexico that has been operating since 2000. It is a standard Vekoma Suspended Looping Coaster model themed to the famed Batman franchise, and was part of Premier Park's massive renovation in 2000.

Contents

History

In 1999, Premier Parks, the holding company for all Six Flags theme parks at the time, bought Six Flags Mexico, then known as Reino Aventura, for an estimated $59 million. Management then proceeded to utilize $40 million to renovate the park, which included the addition of 20 new attractions, 18 of which are still operating today. Batman: The Ride was one of them. It officially opened to the public on April 14, 2000.

Characteristics

Model

Batman: The Ride is a steel Vekoma Suspended Looping Coaster, instead of the similarly themed Bolliger & Mabillard inverts that opened at various Six Flags theme parks in the 1990s. However, this coaster model is very common, with identical coasters existing all around the world. However, it is the only inverted coaster of any kind or model currently operating in the country.

Statistics

Batman: The Ride has a total length of 2,260.5 ft (689.0 m), a top speed of 49.7 mph (80.0 km/h), and a height of 109.3 ft (33.3 m), the highest point of the ride being the peak of the lift hill. The coaster also boasts 5 inversions; including the SLC signature Sea Serpent Roll (which counts as two), a sidewinder, and two inline twists, which occur one after the other.

Trains

Batman: The Ride utilizes two 20 passenger trains, making for an estimated hourly capacity of 1.040 riders per hour. The trains are outfitted with over-the-shoulder restraints, which are known to aid the typical head banging that Suspended Looping Coasters normally get. Riders must be minimum 51 inches tall to ride, although most SLCs require a 52-inch minimum.

Layout

The coaster follows the same layout as the standard Suspended Looping Coaster. The ride starts by taking riders up a 33.3-metre (109 ft) chain hill. Once at the top, the train goes down a steep, banked turn to the right where it enters the first inversion element - a Sea Serpent Roll (also known as a Roll Over), which first features a Sidewinder quickly followed by a reverse sidewinder. [1] Upon exit from this element, the train goes up a hill featuring some banking at the top before descending and approaching the ride's next inversion - a sidewinder. A sidewinder is similar to an Immelmann loop; however, it features a half loop followed by a half corkscrew (rather than an inline twist). [2] From the exit of this sidewinder, the train goes into a sharp 270° helix before entering the ride's final two inversions - inline twists, one after the other. A banked curve to the right turns the train back around to face towards the station, whereas the coaster hits the brake run, and makes two 90° turns to the right, through another brake run, before re-entering the station.

Location

The coaster is located in the DC Universe section of the park, beside attractions such as Superman El Último Escape, Super Girl Sky Flight, and Wonder Woman Coaster, as well as the Teen Titans Turbo Gokarts attraction that was installed alongside it back in 2000.

Related Research Articles

Steel roller coaster Roller coaster that is defined by having a track made of steel

A steel roller coaster is a roller coaster that is defined by having a track made of steel. Steel coasters have earned immense popularity in the past 50 years throughout the world. Incorporating tubular steel track and polyurethane-coated wheels, the steel roller coasters can provide a taller, smoother, and faster ride with more inversions than a traditional wooden roller coaster.

Roller coaster inversion Section of inverted track on a roller coaster

A roller coaster inversion is a roller coaster element in which the track turns riders upside-down and then returns them to an upright position. Early forms of inversions, dating as far back as 1848 on the Centrifugal Railway in Paris, were vertical loops that were circular in nature. They produced massive g-force that was often dangerous to riders, and as a result, the element eventually became non-existent with the last rides to feature the looping inversions being dismantled during the Great Depression. In 1975, designers from Arrow Development created the corkscrew, reviving interest in the inversion during the modern age of steel roller coasters. Since then, the elements have evolved from simple corkscrews and vertical loops to more complex inversions such as Immelmann loops and cobra rolls. Featuring fourteen inversions, The Smiler at Alton Towers holds the world record for the number of inversions on a roller coaster.

Stand-up roller coaster

A stand-up roller coaster is a roller coaster designed to have the passengers stand through the course of the ride.

Batman: The Ride Series of roller coasters at Six Flags parks

Batman: The Ride is an inverted roller coaster based on the DC Comics character Batman and found at seven Six Flags theme parks in the United States. Built by consulting engineers Bolliger & Mabillard, it rises to a height of between 100 and 105 feet and reaches top speeds of 50 mph (80 km/h). The original roller coaster at Six Flags Great America was partially devised by the park's general manager Jim Wintrode. Batman: The Ride was the world's first inverted roller coaster when it opened in 1992, and has since been awarded Coaster Landmark status by the American Coaster Enthusiasts. Clones of the ride exist at amusement parks around the world.

The Riddlers Revenge Roller coaster at Six Flags Magic Mountain

The Riddler's Revenge is a stand-up roller coaster located at Six Flags Magic Mountain. Manufactured by Bolliger & Mabillard, the ride opened as the park's eleventh roller coaster on April 4, 1998, setting multiple world records among stand-up coasters. Originally located in the Movie District section of the park, which later became Metropolis in 2017, The Riddler's Revenge was also the park's single biggest investment at a cost of $14 million. It features a height of 156 feet (48 m), a maximum speed of 65 mph (105 km/h), six inversions, and a track length of 4,370 feet (1,330 m).

Boomerang (roller coaster) Steel roller coaster

Boomerang is a model of roller coaster manufactured and designed by Vekoma, a Dutch manufacturer. The roller coaster model name is from the hunting implement based on the traditions of the Indigenous Australians. As of January 2022 there are 55 Boomerangs operating.

Montu (roller coaster) Inverted roller coaster at Busch Gardens Tampa

Montu is an inverted roller coaster at Busch Gardens Tampa in Tampa, Florida. Designed by Swiss manufacturer Bolliger & Mabillard, it is the park's second roller coaster designed by that company following the success of Kumba, which opened 3 years prior. When the ride opened on May 16, 1996, it was the world's tallest and fastest inverted roller coaster, a title it has since conceded to Alpengeist at sister park Busch Gardens Williamsburg. The ride stands 150 feet (46 m) tall and reaches speeds of 60 miles per hour (97 km/h).

<i>Superman: Ultimate Flight</i> Series of roller coasters at Six Flags parks, USA

Superman: Ultimate Flight is the name of three flying roller coasters currently operating at three Six Flags amusement parks in the United States, those being Six Flags Over Georgia, Six Flags Great Adventure and Six Flags Great America. Each of these steel coasters were designed and built by Swiss manufacturer Bolliger & Mabillard and opened in 2002 and 2003. Since 2003, Six Flags has installed Superman: Ultimate Flight in three of their parks. Themed to the popular comic book character, Superman: Ultimate Flight simulates flying by positioning its passengers parallel to the track, supported by harnesses and facing the ground through most of the ride. In the station, riders board the train sitting down. After the train is locked and checked, the trains are raised into the flying position. After the ride, the seats are lowered back into the sitting position for the next round of riders.

Giant Inverted Boomerang Steel roller coaster

A Giant Inverted Boomerang is a type of steel shuttle roller coaster manufactured by the Dutch firm Vekoma. The ride is a larger, inverted version of Vekoma's popular Boomerang sit down roller coasters. As of January 2022, four installations of the model are operating, with another one under construction.

Suspended Looping Coaster Type of roller coaster

The Suspended Looping Coaster is a model of steel inverted roller coaster built by Vekoma. There are at least 39 different installations across the world. The minimum rider height requirement is 130 centimetres. Vekoma is now marketing a Suspended Thrill Coaster as a successor to the Suspended Looping Coaster. The Odyssey is the largest, fastest and tallest SLC ever built at Fantasy Island in the UK.

Arkham Asylum – Shock Therapy

Arkham Asylum – Shock Therapy is a Vekoma SLC roller coaster located at Warner Bros. Movie World on the Gold Coast, Queensland, Australia. When the ride was introduced in 1995, it was themed to the Lethal Weapon film series created by Shane Black and was named Lethal Weapon – The Ride. In 2012, the ride was rethemed to Batman: Arkham Asylum and renamed Arkham Asylum. The ride was the first steel inverted roller coaster at an Australian theme park.

T3 (roller coaster) Roller coaster at Kentucky Kingdom

T3 (stylized as T3; pronounced "T-three", "T-cubed", or "Terror to the third power") is an inverted roller coaster at Kentucky Kingdom in Louisville, Kentucky. Previously named T2, the Suspended Looping Coaster model manufactured by Vekoma opened on April 8, 1995. The amusement park closed in 2009 due to financial difficulties, but later reopened under new ownership in 2014. The roller coaster was refurbished and renamed T3, which reopened to the public on July 3, 2015.

Batwing (roller coaster) Flying roller coaster at Six Flags America

Batwing is a steel flying roller coaster built by Vekoma at Six Flags America in Prince George's County, Maryland. This is nearly identical to Nighthawk at Carowinds, however that ride has a slightly different ending, and different paint scheme. The ride is also a clone of the now-defunct Firehawk at Kings Island.

The Jester (roller coaster) Steel roller coaster at Six Flags New Orleans

The Jester is a steel roller coaster located at the abandoned Six Flags New Orleans amusement park in New Orleans. Built and designed by Vekoma, the ride originally opened at Six Flags Fiesta Texas in 1996 as The Joker's Revenge. After its closure in 2001, the coaster was sent to Six Flags New Orleans where it became The Jester. The ride opened to the public at Six Flags New Orleans on April 13, 2003. Following the devastation to the amusement park in August 2005 by Hurricane Katrina, the roller coaster ceased operation following the park's closure but remains standing.

Flight Deck (Canadas Wonderland)

Flight Deck is a steel inverted roller coaster located at Canada's Wonderland in Vaughan, Ontario, Canada. It originally opened in 1995 under the name Top Gun until it was renamed in 2008 to Flight Deck, after Paramount Parks sold Wonderland to Cedar Fair which necessitated the gradual removal of all Paramount names and trademarks from the theme park.

Kong (roller coaster)

Kong is an inverted roller coaster located at Six Flags Discovery Kingdom amusement park in Vallejo, California. The Suspended Looping Coaster (SLC) model was manufactured by Vekoma and first opened to the public as Hangman at Opryland USA on May 1, 1995. Following Opryland's closure in 1997, the roller coaster was sold to Premier Parks and moved to Six Flags Discovery Kingdom, where it reopened as Kong in May 1998.

Firehawk (roller coaster) Former roller coaster at Kings Island

Firehawk was a flying roller coaster located at Kings Island in Mason, Ohio. Manufactured by Vekoma, it originally opened as X-Flight at Six Flags Worlds of Adventure on May 26, 2001, billed as the Midwest's first and only flying roller coaster. Cedar Fair purchased Worlds of Adventure in 2004 and began efforts to downsize the park. X-Flight was relocated to Kings Island following the 2006 season, where it reopened as Firehawk on May 26, 2007.

Roller coaster elements are the individual parts of roller coaster design and operation, such as a track, hill, loop, or turn. Variations in normal track movement that add thrill or excitement to the ride are often called "thrill elements".

Goliath (Six Flags Fiesta Texas) Steel inverted roller coaster currently operating at Six Flags Fiesta Texas in San Antonio, Texas

Goliath is an inverted roller coaster located at Six Flags Fiesta Texas in San Antonio, Texas, United States. Designed by Werner Stengel and Swiss manufacturer Bolliger & Mabillard, Goliath initially opened in 1995 at an amusement park in Japan, and has been operating at Six Flags Fiesta Texas since 2008. It stands at a height of 105 feet (32 m), reaches a maximum speed of 50 mph (80 km/h), and features multiple inversions.

Sky Scrapper Roller coaster

Sky Scrapper is a flying roller coaster at World Joyland in Wujin, Changzhou, Jiangsu, China. Sky Scrapper was one of World Joyland's opening day attractions, officially opening on April 30, 2011. The 2,805.1-foot-long (855.0 m) ride stands 131.3 feet (40.0 m) tall, and features a top speed of 54.7 mph (88.0 km/h). Designed by Swiss firm Bolliger & Mabillard, Sky Scrapper restrains riders in the prone position and features five inversions.

References

  1. Marden, Duane. "Roll Over". Roller Coaster DataBase . Retrieved 28 March 2019.
  2. Marden, Duane. "Sidewinder". Roller Coaster DataBase . Retrieved 28 March 2019.