This article needs additional citations for verification .(December 2018) |
Inverted roller coaster | |
---|---|
Status | In production |
First manufactured | 1992 |
No. of installations | 189 |
Manufacturers | Bolliger & Mabillard, Vekoma, Intamin, Gerstlauer, and Mack Rides |
Vehicles | Suspended trains |
Restraint Style | Over-the-shoulder (most common style) |
An inverted roller coaster is a type of steel roller coaster in which the train runs under the track with the seats directly attached to the wheel carriage. Riders are seated in open cars, letting their feet swing freely. The inverted coaster was pioneered by Swiss roller coaster manufacturer Bolliger & Mabillard in the early 1990s with the development of Batman: The Ride, which opened at Six Flags Great America on May 9, 1992.
Versions of inverted coasters have since been produced by other major coaster manufacturers such as Vekoma and Intamin. Intamin has few designs classified as inverted coasters, although they do install inverted coaster trains on some of their launched designs. Vekoma, however, predominantly mass-produced the same design (Suspended Looping Coaster) with 41 identical coasters installed around the world, though Vekoma now markets a newer style of inverted coaster, the Suspended Thrill Coaster, which utilises lap-bar restraints instead of the traditional over-the-shoulder restraints. [1] Vekoma was also the first manufacturer to install a family-friendly inverted roller coaster with the opening of Flying Ace Aerial Chase at Kings Island in 2001. Giovanola also has a single inverted coaster operating, which uses the box-track design, also used by Bolliger & Mabillard.
The inverted coaster differs from the older suspended coaster, which runs under the track, but features cars that enclose the rider's legs and lower body and are attached to the track above by a pivoting bar, whereas the trains on inverted coasters are directly attached to the track. This direct attachment facilitates inversions, which aren't possible on suspended coasters. Inversions typically featured on inverted coasters include vertical loops, zero-g rolls, Immelmann loops, cobra rolls, and corkscrews, though Vekoma's suspended loopers typically feature sidewinder and in-line twist elements.
The inverted coaster was developed in the early 1990s by engineers Walter Bolliger and Claude Mabillard of the Swiss roller coaster manufacturer Bolliger & Mabillard in cooperation with engineer Robert Mampe and Jim Wintrode, at the time the general manager of Six Flags Great America, who first envisioned a suspended coaster capable of inversions. [2] [3] [4] The result of this partnership, Batman: The Ride, soft opened at Six Flags Great America as the first inverted coaster in the world on May 2, 1992, officially opening on May 9, 1992. [3] With the coaster's success, Time Warner, Six Flags' parent company at the time, moved to construct a series of duplicates of the ride at various Six Flags parks. In 1993, a second installation of Batman: The Ride at Six Flags Great Adventure opened as the second inverted coaster in the world. [5] Six Flags has since gone on to construct five additional duplicates of the ride. [6]
The second unique inverted coaster was Flight Deck which opened in 1993 at California's Great America as Top Gun. [7] Nemesis Reborn was the first inverted coaster constructed outside the United States when it opened at Alton Towers in Staffordshire, England in 1994. [8] That same year, Raptor opened at Cedar Point. With a 3,790-foot (1,160 m) track layout, Raptor was far larger and featured a less compact layout than its predecessors. It also featured the first cobra roll on an inverted coaster. [9] [10]
231 inverted roller coasters have been installed at various theme parks, some of which have been relocated. The following list is not exhaustive and only shows the most notable installations.
A stand-up roller coaster is a roller coaster where passengers aboard a train stand throughout the course of the ride. The first manufacturer to employ the format was TOGO, a Japanese company that converted two traditional roller coasters in 1982 to stand-up configurations. Arrow Dynamics followed suit in the United States the following year with their own conversion. The first roller coaster designed from the ground up as a stand-up coaster was King Cobra, built by TOGO, which opened at Kings Island in 1984. Intamin and Bolliger & Mabillard (B&M) have also designed stand-up models beginning in the 1990s, with the latest opening in 2023 as Pipeline: The Surf Coaster in SeaWorld Orlando.
Bolliger & Mabillard, officially Bolliger & Mabillard Consulting Engineers, Inc. and often abbreviated B&M, is a roller coaster design consultancy based in Monthey, Switzerland. The company was founded in 1988 by engineers Walter Bolliger and Claude Mabillard, both of whom had worked for Giovanola.
A Floorless Coaster, commonly known as a Floorless Roller Coaster, is a type of steel roller coaster manufactured by Bolliger & Mabillard where riders sit with no floor underneath them, allowing their feet to swing freely just above the track. Development of the Floorless Coaster model began between 1995 and 1996 with Medusa at Six Flags Great Adventure opening on April 2, 1999, making it the world's first Floorless Roller Coaster. Floorless Roller Coasters also tend to have 3 to 7 inversions incorporated in the layout of the coaster.
Batman: The Ride is an inverted roller coaster based on the DC Comics character Batman and found at seven Six Flags theme parks in the United States and at least one outside the US. Built by consulting engineers Bolliger & Mabillard, it rises to a height of between 100 and 105 feet and reaches top speeds of 50 mph (80 km/h). The original roller coaster at Six Flags Great America was partially devised by the park's general manager Jim Wintrode. Batman: The Ride was the world's first inverted roller coaster when it opened in 1992, and has since been awarded Coaster Landmark status by the American Coaster Enthusiasts. Clones of the ride exist at amusement parks around the world.
Giovanola Frères SA was a prominent steel manufacturing company based in Monthey, Switzerland. It was known for building electrical power stations, water storage tanks, pipelines, boilers, highway bridges, submarines, ski lifts and many other steel products. The company started out as a small metal forging shop, founded by Joseph Giovanola in 1888. Joseph Sr. died in 1904, and the company was taken over by his sons, the eldest of which, Joseph Jr., was just 17 years of age. By 1930 the company had grown to the point that it required a new factory which was constructed in Monthey.
Green Lantern, formerly known as Chang, was a stand-up roller coaster located at Six Flags Great Adventure in Jackson Township, New Jersey. Green Lantern stood 155 feet (47 m) tall and featured a top speed of 63 miles per hour (101 km/h). The 4,155-foot-long (1,266 m) ride featured five inversions and had a duration of approximately 21⁄2 minutes. The steel coaster was designed and built by Swiss manufacturer Bolliger & Mabillard.
The Riddler's Revenge is a steel stand-up roller coaster located at Six Flags Magic Mountain. Manufactured by Bolliger & Mabillard, the ride opened as the park's eleventh roller coaster on April 4, 1998, setting multiple world records among stand-up coasters. Originally located in the Movie District section of the park, which later became Metropolis in 2017, The Riddler's Revenge was also the park's single biggest investment at a cost of $14 million. It features a height of 156 feet (48 m), a maximum speed of 65 mph (105 km/h), six inversions, and a track length of 4,370 feet (1,330 m).
Nemesis Reborn, previously Nemesis, is an inverted roller coaster located at the Alton Towers theme park in Staffordshire, England. It was manufactured by Bolliger & Mabillard (B&M) and designed by Werner Stengel, from a concept by park developer John Wardley. It opened in the Forbidden Valley area of the park on 19 March 1994.
A fourth-dimension roller coaster is a type of steel roller coaster where riders are rotated independently of the track's orientation about a horizontal axis perpendicular to the track. This feature allows riders to experience inversions without the track rotating upside down. Some fourth-dimension roller coasters are controlled, with seats that rotate based on the spacing of two additional rails on the track. Others are free-spinning, where the seats flip primarily due to forces exerted by the ride's elements, offering a different experience during each ride.
Montu is an inverted roller coaster at Busch Gardens Tampa Bay in Tampa, Florida. Designed by Swiss manufacturer Bolliger & Mabillard, it is the park's second roller coaster designed by that company following the success of Kumba, which opened 3 years prior. When the ride opened on May 16, 1996, it was the world's tallest and fastest inverted roller coaster, a title it has since conceded to Alpengeist at sister park Busch Gardens Williamsburg. The ride stands 150 feet (46 m) tall and reaches speeds of 60 miles per hour (97 km/h).
Superman: Ultimate Flight is the name of three flying roller coasters currently operating at three Six Flags amusement parks in the United States, those being Six Flags Over Georgia, Six Flags Great Adventure and Six Flags Great America. Each of these steel coasters were designed and built by Swiss manufacturer Bolliger & Mabillard and opened in 2002 and 2003. Since 2003, Six Flags has installed Superman: Ultimate Flight in three of their parks. Themed to the popular comic book character, Superman: Ultimate Flight simulates flying by positioning its passengers parallel to the track, supported by harnesses and facing the ground through most of the ride. In the station, riders board the train sitting down. After the train is locked and checked, the trains are raised into the flying position. After the ride, the seats are lowered back into the sitting position for the next round of riders.
A Giant Inverted Boomerang is a type of steel shuttle roller coaster manufactured by the Dutch firm Vekoma. The ride is a larger, inverted version of Vekoma's popular Boomerang sit down roller coasters. As of December 2024, four installations of the model are operating, with another one under construction.
The Suspended Looping Coaster is a model of steel inverted roller coaster built by Dutch manufacturer Vekoma. There are at least 39 different installations across the world. The minimum rider height requirement is 130 centimetres. Vekoma is now marketing a Suspended Thrill Coaster as a successor to the Suspended Looping Coaster. The Odyssey is the largest, fastest and tallest SLC ever built at Fantasy Island in the UK.
T3 (stylized as T3; pronounced "T-three", "T-cubed", or "Terror to the third power") was an inverted roller coaster located at Kentucky Kingdom in Louisville, Kentucky. The Suspended Looping Coaster model manufactured by Vekoma originally opened as T2 on April 8, 1995. Following the amusement park's closure in 2009 due to financial difficulties, the ride sat idle for several years. Under new park ownership, the roller coaster was refurbished and renamed T3, which reopened to the public as T3 on July 3, 2015. The ride closed permanently following the 2022 season.
The Dive Coaster is a steel roller coaster model developed and engineered by Bolliger & Mabillard. The design features one or more near-vertical drops that are approximately 90 degrees, which provide a moment of free-falling for passengers. The experience is enhanced by unique trains that seat up to ten riders per row, spanning only two or three rows total. Unlike traditional train design, this distinguishing aspect gives all passengers virtually the same experience throughout the course of the ride. Another defining characteristic of Dive Coasters is the holding brake at the top of the lift hill that holds the train momentarily right as it enters the first drop, suspending some passengers with a view looking straight down and releasing suddenly moments later.
The Great White is an inverted roller coaster at SeaWorld San Antonio, and the first roller coaster to be built at a SeaWorld park. It is not only the first inverted roller coaster in Texas, but also the first one in the state to be built by Bolliger & Mabillard.
Chupacabra is an inverted roller coaster located at Six Flags Fiesta Texas in San Antonio, Texas, United States. Designed by Werner Stengel and Swiss manufacturer Bolliger & Mabillard, Chupacabra initially opened in 1995 at an amusement park in Japan, it then operated at Six Flags New Orleans until Hurricane Katrina caused the parks abandonment in 2005 and removal of Chupacabra and was relocated to Six Flags Fiesta Texas where it has operated since 2008. It stands at a height of 105 feet (32 m), reaches a maximum speed of 50 mph (80 km/h), and features multiple inversions.
Wing Coaster is engineering firm Bolliger & Mabillard’s designation for its winged roller coaster designs. Winged roller coasters are a type of steel roller coaster where pairs of riders sit on either side of a roller coaster track in which nothing is above or below the riders. B&M began development on the first Wing Coaster between 2007 and 2008 leading to the opening of Raptor at Gardaland on 1 April 2011. There were eighteen B&M-designed Wing Coasters either under construction or operating worldwide as of 2024, with one more standing but not operating.
Batman: The Ride is an inverted coaster at Six Flags Mexico that has been operating since 2000. It is a standard Vekoma Suspended Looping Coaster model themed to the famed Batman franchise, and was part of Premier Park's massive renovation in 2000.