Blister hangar

Last updated
Remains of Lymington Airfield, Snooks Farm Remains of Lymington Airfield, Snooks Farm - geograph.org.uk - 174708.jpg
Remains of Lymington Airfield, Snooks Farm

A blister hangar is a novel arched, portable aircraft hangar designed by notable British airport architect Graham R Dawbarn patented by Miskins and Sons in 1939. Originally made of wooden ribs clad with profiled steel sheets, steel lattice ribs and corrugated steel sheet cladding later became the norm. It does not require a foundation slab and can be anchored to the ground with iron stakes. Numerous examples were manufactured for military use in World War 2 and various different sizes were available. Many found post-war use as agricultural or industrial buildings and some still remain in use on airfields such as Fairoaks, Redhill, Coal Aston and White Waltham today. Denham Aerodrome still uses its blister hangar to house the only fixed wing flying school on the field, The Pilot Centre.[ citation needed ]

Related Research Articles

<span class="mw-page-title-main">Moffett Federal Airfield</span> Joint civil-military airport in California

Moffett Federal Airfield, also known as Moffett Field, is a joint civil-military airport located in an unincorporated part of Santa Clara County, California, United States, between northern Mountain View and northern Sunnyvale. On November 10, 2014, NASA announced that it would be leasing 1,000 acres (400 ha) of the airfield property to Google for 60 years.

<i>Ribes</i> Genus of flowering plants in the order Saxifragales

Ribes is a genus of about 200 known species of flowering plants, most of them native to the temperate regions of the Northern Hemisphere. The various species are known as currants or gooseberries, and some are cultivated for their edible fruit or as ornamental plants. Ribes is the only genus in the family Grossulariaceae.

<span class="mw-page-title-main">Nissen hut</span> Prefabricated steel hut

A Nissen hut is a prefabricated steel structure originally for military use, especially as barracks, made from a half-cylindrical skin of corrugated iron. It was designed during the First World War by the Canadian-American-British engineer and inventor Major Peter Norman Nissen. It was used also extensively during the Second World War and was adapted as the similar Quonset hut in the United States.

<span class="mw-page-title-main">Siding (construction)</span> Exterior cladding on building walls

Siding or wall cladding is the protective material attached to the exterior side of a wall of a house or other building. Along with the roof, it forms the first line of defense against the elements, most importantly sun, rain/snow, heat and cold, thus creating a stable, more comfortable environment on the interior side. The siding material and style also can enhance or detract from the building's beauty. There is a wide and expanding variety of materials to side with, both natural and artificial, each with its own benefits and drawbacks. Masonry walls as such do not require siding, but any wall can be sided. Walls that are internally framed, whether with wood, or steel I-beams, however, must always be sided.

<span class="mw-page-title-main">Hangar</span> Closed structure to hold aircraft or spacecraft in protective storage

A hangar is a building or structure designed to hold aircraft or spacecraft. Hangars are built of metal, wood, or concrete. The word hangar comes from Middle French hanghart, of Germanic origin, from Frankish *haimgard, from *haim and gard ("yard"). The term, gard, comes from the Old Norse garðr.

<span class="mw-page-title-main">RAF Goxhill</span>

Royal Air Force Goxhill or RAF Goxhill is a former Royal Air Force station located east of Goxhill, on the south bank of the Humber Estuary, opposite the city of Kingston upon Hull, in north Lincolnshire, England.

<span class="mw-page-title-main">Stone veneer</span>

Stone veneer is a thin layer of any stone used as decorative facing material that is not meant to be load bearing. Stone cladding is a stone veneer, or simulated stone, applied to a building or other structure made of a material other than stone. Stone cladding is sometimes applied to concrete and steel buildings as part of their original architectural design.

The Bellman Hangar was designed in the United Kingdom in 1936 by the Directorate of Works structural engineer, N. S. Bellman, as a temporary aircraft hangar capable of being erected or dismantled by unskilled labour with simple equipment and to be easily transportable. Commercial manufacturing rights were acquired by Head Wrightson & Co of Teesdale Iron Works, Thornaby-on-Tees. By November 1938, 10 had even been supplied to Russia.

Mondolfo Airfield is an abandoned World War II military airfield in Italy, located about 6 km southeast of Marotta and 4 km east of Mondolfo in the Marche region.

Berteaux Airfield is an abandoned World War II United States Army Air Forces military airfield in Algeria, which was located approximately 9 km east of Telerghma; 35 km southwest of Constantine.

Castel Volturno Airfield is an abandoned military airfield in Italy, located approximately 3 km east of Castel Volturno, in the Province of Caserta in the Italian region Campania, located about 35 km northwest of Naples and about 35 km west of Caserta on the Volturno river.

<span class="mw-page-title-main">Bessonneau hangar</span>

The Bessonneau hangar was a portable timber and canvas aircraft hangar used by the French Aéronautique Militaire and subsequently adopted by the Royal Naval Air Service (RNAS) and the Royal Flying Corps (RFC) during the First World War. Many Bessonneau hangars were also subsequently used by the fledgling Royal Air Force (RAF) as temporary structures until more permanent facilities could be built such as at RAF Cleave in Cornwall.

<span class="mw-page-title-main">Coal Aston Airfield</span> Airport

Coal Aston Airfield, also known as Apperknowle Airstrip, is a general aviation airfield located in the village Apperknowle, Derbyshire, 5.8 mi south of Sheffield.

There are three historic airship hangars at Moffett Field, in Mountain View in the southern San Francisco Bay Area, California. Hangar One is based on a structure of steel girders, while Hangars Two and Three are of wood. They are among the world's largest freestanding structures.

<span class="mw-page-title-main">Second World War Hangar No. 7</span> Historic site in Queensland, Australia

Second World War Hangar No. 7 is a heritage-listed hangar at 116 Lamington Avenue, Eagle Farm, City of Brisbane, Queensland, Australia. It was designed by the United States Army and built from 1942 to c. 1952 by Manuel Richard Hornibrook. It was added to the Queensland Heritage Register on 7 February 2005.

<span class="mw-page-title-main">Gulfport Army Air Field Hangar</span> United States historic place

Gulfport Army Air Field Hangar, also known as FBO Hangar and Gulfport Municipal Airport Terminal, was constructed in 1944-45 for use in training combat crews to operate the B-29 Superfortress. Located in Gulfport, Mississippi, the hangar was added to the National Register of Historic Places in 2011, and was designated a Mississippi Landmark in 2012.

<span class="mw-page-title-main">Second World War RAAF Buildings, Maryborough Airport</span> Historic site in Queensland, Australia

Second World War RAAF Buildings is a heritage-listed group of air force base buildings at Saltwater Creek Road, Maryborough, Fraser Coast Region, Queensland, Australia. It was built from c. 1941 to c. 1944. It was added to the Queensland Heritage Register on 23 March 2007.

<span class="mw-page-title-main">Qantas Hangar, Longreach</span> Historic site in Queensland, Australia

Qantas Hangar is a heritage-listed former hangar and now museum at Landsborough Highway, Longreach, Longreach Region, Queensland, Australia. It was built in 1922. It is now part of the Qantas Founders Outback Museum. It was added to the Queensland Heritage Register on 21 October 1992.

Macrossan Stores Depot Group is a heritage-listed military installation at Flinders Highway, Macrossan (Dotswood), Charters Towers Region, Queensland, Australia. It was added to the Australian Commonwealth Heritage List on 22 June 2004.

<span class="mw-page-title-main">Type-C hangar</span> Aircraft hangar type used by the Royal Air Force

The Type-C hangar is a specific design of aircraft hangar built by the Royal Air Force during its expansion period of the 1930s. The hangar type generally measured 300 feet (91 m) in length, with a width of 152 feet 5 inches (46.46 m), and a clear height of 35 feet 4 inches (10.77 m). Whilst the type was designed, built and used during the expansion programme, installation of type-C hangars continued into the Second World War. By 1944, it was determined that at least one type-C hangar existed in 64 RAF expansion period airfields, which were open at that time.

References