British Seagull

Last updated
Lateral view of a Forty series British Seagull. The serial number dates it to 1954/1955 BritishSeagull2.JPG
Lateral view of a Forty series British Seagull. The serial number dates it to 1954/1955
Forty Plus model British Seagull with recoil starter BritishSeagull.jpg
Forty Plus model British Seagull with recoil starter

The British Seagull was a British manufacturer of two-stroke outboard engines in Poole, Dorset from the late 1930s until the mid-1990s. Although their "Classic" engines were for decades an exemplar of rugged simplicity and reliability, the company eventually failed when customer tastes changed and as tighter emissions regulations took effect. Production of complete engines stopped in 1996, and another company bought the rights to the brand in 1999. Spare parts continue to be produced for existing engines. [1]

Contents

History

British Seagull outboards were first sold under the name Marston Seagull. They were developed at John Marston Ltd's "Sunbeamland" factory in Wolverhampton by development engineers John Way-Hope and Bill Pinninger. This pair later bought the manufacturing rights in 1937 and marketed outboards as Bristol Seagull, later moving to Poole and settling for the name British Seagull.

There are several different British Seagull outboard motor models, usually with a single cylinder water-cooled two-stroke engine. Originally known as "The Best Outboard in the World", then changed to "The Best Outboard Motor for the World". Some of the engines had the Villiers patented flywheel magneto, and on its port side was a simple carburettor. Above the cylinder head was bolted a small brass fuel tank whose 10:1, or 25:1 depending on age, fuel/oil mix was gravity-fed to the carburettor via a fuel line. Starting was effected with a hand-wound pull-rope, although a recoil starter was an option. Connecting the motor to the gearbox and propeller were two downtubes, the forward one containing the drive shaft and the aft tube serving as the exhaust, which vented underwater.

The engines proved very rugged as they used high quality materials, and thousands have lasted for years, even in harsh marine environments many in developing countries too. Seagull outboards were utilitarian in nature with a relatively slow-turning prop, and so were ideal for use in dinghies, tenders and small yachts. The Silver Century Plus model could propel a displacement hull of up to 26 feet in length but Seagull outboards were unsuitable for high speed craft. [2]

Models

An early engine of the company was the Model 102, developed from the Marston models of the 1930s. The Model 102 engines were fairly large and featured an integral engine cylinder block and head, with a water-injected exhaust. Some Model 102 outboards had a 13-inch-diameter (330 mm) propeller, gaining the moniker of "The Barge Pusher".

The model range for which Seagull is most famous is the "Classic" range. These "square block models" comprised the 64 cc Featherweight (aka Forty Minus) and Forty Plus, and the 102 cc Century and Century Plus. The Forty Minus and Plus used identical power units, but the Plus had a larger gearbox and propeller. The Century and Century Plus used even larger gearboxes and propellers. Classic model engines were produced from the late 1950s until the mid-1990s, and many examples are still in everyday use. The long life span is down to the high quality metals and the use of high-tensile bolts and studs.

In the early 1980s the factory produced a new series of British Seagull outboards, the QB series. The power units were developed by Queen's University, Belfast (hence QB) whose Mechanical Engineering Department specialised in modernising two-stroke design. [3] [4] Painted black and sometimes known as the Irish Seagull, they featured quieter, more efficient engines, with a water-cooled exhaust and modified cylinder porting.

In the late 1980s British Seagull introduced two further models to their range, the Model 170 and the Model 125. Fitted with a cowling to enclose the engine, they featured upgraded carburettors and cylinder blocks. Both new models suffered from poorly designed crankshaft bushings, resulting in warranty claims against the company. Until that time the "Best Outboard Motor for the World" (as the marketing slogan ran) had an envious reputation for reliability, but these new models were never popular and they dented the company's image.

Towards the end of production a new model called the "5R" was introduced. The design of this engine was quite different from earlier models, using a conventional gearbox from a Yamaha 4HP outboard attached via an adaptor plate to a QB engine. These models were painted blue, the very last examples (known as "gold tops") having propellers and recoil starters that were gold-painted.

Fuel/oil mix

Models manufactured from 1931 to 1945 had a recommended petrol-to-oil mix of either 8:1 or 10:1. From 1942 models specified a 10:1 mix which was specified up to 1979. After that date a 25:1 mix was specified, which was again changed for the introduction of the models 125 and 170, but these engines with the 50:1 mix soon failed, and British Seagull again specified 25:1. This relatively high percentage of oil was necessary due to the way the crankshaft bushings worked. Early engines used short bushings, and later ones used longer bushings, hence the changes in oil requirement. The longer bushings were, in fact, used from 1967 onwards, and the engines from 1967 to 1979 can be used on the 25:1 mix by making carburettor adjustments.

Related Research Articles

Outboard motor Self-contained propulsion system for boats

An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorised method of propelling small watercraft. As well as providing propulsion, outboards provide steering control, as they are designed to pivot over their mountings and thus control the direction of thrust. The skeg also acts as a rudder when the engine is not running. Unlike inboard motors, outboard motors can be easily removed for storage or repairs.

Two-stroke engine Internal combustion engine type

A two-strokeengine is a type of internal combustion engine that completes a power cycle with two strokes of the piston during one power cycle, this power cycle being completed in one revolution of the crankshaft. A four-stroke engine requires four strokes of the piston to complete a power cycle during two crankshaft revolutions. In a two-stroke engine, the end of the combustion stroke and the beginning of the compression stroke happen simultaneously, with the intake and exhaust functions occurring at the same time.

Flat-twin engine Piston engine with two cylinders in opposing directions

A flat-twin engine is a two-cylinder internal combustion engine with the cylinders on opposite sides of the crankshaft. The most common type of flat-twin engine is the boxer-twin engine, where both cylinders move inwards and outwards at the same time.

Straight-twin engine Inline piston engine with two cylinders

A straight-twin engine, also known as an inline-twin, vertical-twin, or parallel-twin, is a two-cylinder piston engine whose cylinders are arranged in a line along a common crankshaft.

H engine

An H engine is a piston engine comprising two separate flat engines, most often geared to a common output shaft. The name "H engine" is due to the engine blocks resembling a letter "H" when viewed from the front. The most successful "H" engine in this form was the Napier Dagger and its derivatives. The name was also applied to engines of the same basic layout, but rotated through 90 degrees—most famously the Napier Sabre series. A variation on the "H" theme were the Fairey Prince (H-16) & Fairey P.24 Monarch, where the two engines retained separate drives, driving Contra-rotating propellers through separate concentric shafts. Although successful, they only existed in prototype form.

Rolls-Royce Griffon 1930s British piston aircraft engine

The Rolls-Royce Griffon is a British 37-litre capacity, 60-degree V-12, liquid-cooled aero engine designed and built by Rolls-Royce Limited. In keeping with company convention, the Griffon was named after a bird of prey, in this case the griffon vulture.

Villiers Engineering Historical motorcycle manufacturer

Villiers Engineering was a manufacturer of motorcycles and cycle parts, and an engineering company based in Villiers Street, Wolverhampton, England.

RAF 1 V-8 piston aircraft engine

The RAF 1 was a British air-cooled, V-8 engine developed for aircraft use during World War I. Based on a French design, it was developed at the Royal Aircraft Factory, and built by six different British companies including Daimler, Rolls-Royce and Wolseley Motors Limited.

Anzani 10-cylinder 1910s French aircraft piston engine

The Anzani 10 was a 1913 10-cylinder air-cooled radial aircraft engine. It powered several experimental aircraft and also the later production versions of the Caudron G.3 reconnaissance aircraft, the Caudron G.4 bomber/trainer and the first production Cessna, the Model AA.

Yamaha RD500LC Type of motorcycle

The Yamaha RD500LC is a high-performance, two-stroke sports motorcycle, also known as the RZ500 in Canada and Australia. A lightened but detuned version known as the RZV500R was developed for the Japanese home market. Strict United States Environmental Protection Agency regulations meant that the RZ500 was not available for sale in that country. Produced for a short period between 1984 and 1986 it has become a sought after collector's machine.

The Rolls-Royce 30 hp was one of four cars to be produced as a result of an agreement of 23 December 1904 between Charles Rolls and Henry Royce. Badged as a Rolls-Royce, the 30 hp was produced during 1905 and 1906 by Royce's company, Royce Ltd. at its factory in Cooke Street, Hulme, Manchester. It was sold exclusively by Rolls' motor dealership, C.S.Rolls & Co., at a price of GBP 890. The engine was exhibited at the Paris Salon in December 1904, along with the 10 hp, 15 hp and 20 hp models.

Lorraine Pétrel 1930s French piston aircraft engine

The Lorraine 12H Pétrel was a French V-12 supercharged, geared piston aeroengine initially rated at 370 kW (500 hp), but later developed to give 640 kW (860 hp). It powered a variety of mostly French aircraft in the mid-1930s, several on an experimental basis.

The MidWest AE series are lightweight, liquid-cooled, single- and twin-rotor Wankel engines, with dual ignition, designed for light aircraft. They were produced by Mid-West Engines Ltd. at Staverton Airport, Gloucestershire, UK.

The Vincent lifeboat engine was a unique design of two-stroke petrol engine. It was developed during World War II as a highly efficient engine for airborne lifeboats, providing a long range from little fuel.

Daimler Double-Six sleeve-valve V12 Motor vehicle engine

Daimler Double-Six piston engine was a sleeve-valve V12 engine manufactured by The Daimler Company Limited of Coventry, England between 1926 and 1938 in four different sizes for their flagship cars.

Austin 25/30 Car model

The Austin 25-30 is a motor car. It was the first automobile produced by newly established British car manufacturer Austin.

BSA A10 series Motorcycle

The BSA A10 series was a range of 646 cc (39.4 cu in) air-cooled parallel twin motorcycles designed by Bert Hopwood and produced by Birmingham Small Arms Company at Small Heath, Birmingham from 1950 to 1963. The series was succeeded by the A65 unit construction models.

Standard SC engine Motor vehicle engine

The Standard SC engine is a cast-iron overhead valve straight-four engine designed and initially produced by Standard Triumph. Over its production life displacement grew from an initial size of just over 800 cc to nearly 1500 cc. Introduced in the Standard Eight in 1953, it would eventually be used in a wide range of vehicles from Standard, Triumph, and MG.

Bridgestone (motorcycle) Brand of motorcycles produced by the Japanese tire manufacturer between 1952 and 1970

Bridgestone motorcycles were a division of the Bridgestone Tire Co. of Kyōbashi, Tokyo, Japan that produced mopeds and motorcycles from 1952 to 1970. Initially producing power assisted bicycles, the division moved on to producing mopeds and then motorcycles. The motorcycles were technologically advanced and powered by two-stroke engines. The high technical specification resulted in the machines being more expensive compared to other manufacturers models. Production was stopped in 1970 to protect the supply of tyres to other manufacturers.

Norton Model 7 Dominator Type of motorcycle

The Norton Model 7 Dominator was a 500 cc vertical twin motorcycle manufactured by the Norton Motorcycle Company from 1949 to 1955. It was the first of Norton's Dominator range of motorcycles. The engine was designed by Bert Hopwood and was a departure from Norton's previous practice of producing single-cylinder machines. The Model 7 was used in Japan as a police motorcycle.

References

  1. ↑ "History". British Seagull Outboard Motors. Retrieved 2019-05-07.
  2. ↑ Classic Boat Review
  3. ↑ QUB/Lotus/Jaguar 2-stroke research
  4. ↑ QUB 2-stroke development
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.