| BB-1 Pioneer | |
|---|---|
 | |
| The Pioneer in front of the Franklin Institute | |
| Role | Experimental flying boat |
| National origin | United States |
| Manufacturer | Budd Company |
| First flight | 1931 |
| Number built | 1 |
The Budd BB-1 Pioneer was an experimental United States flying boat of the 1930s utilizing the Savoia-Marchetti S.56 design. Its framework was constructed entirely of stainless steel, using a newly patented method of welding that alloy. [1]
By 1930 the Budd Company was a national leader in construction of railway vehicles containing considerable amounts of stainless steel. Anxious to expand this expertise into other areas, company founder Edward G. Budd hired Enea Bossi to design and construct a flying boat of shot-welded stainless steel sheet and strip. They contracted with the Italian aircraft company Savoia-Marchetti for the use of the S.56 design. The S.56 was a single-engine three-seat flying boat. [2] The Italian company granted licenses for construction of three units in the US, one to Budd and the others to other companies. [3]
The resulting BB-1 was a biplane flying boat, with the lower wing attached near the top of the hull and the upper wing held high above, with a single Kinner C-5 radial engine mounted on the aircraft centerline between the wings. Wheels mounted on the sides of the hull were retracted upwards during water landings. The single tailwheel was not retractable. The pilot and two passengers rode in an open cockpit near the bow.
The prototype BB-1 first flew from the Budd Factory airfield, a field northwest of Philadelphia (Latitude 40.11/West Longitude 75.04). The field is still visible, although not used as a landing strip.
Although the Pioneer was the first American airplane to be made of stainless steel, it did not go into production. Another stainless steel amphibian, the Fleetwings Sea Bird was the first to go into production, with one prototype and five production units manufactured. [4]
The BB-1 Pioneer first flew in 1931. Flight tests showed it to be typical in performance and challenging to handle on the water. [5] The aircraft logged about 1,000 flying hours on tours of the US and Italy.
In 1934 its fabric and lower wing were removed, and it was placed on permanent display outside the Franklin Institute in Philadelphia, Pennsylvania.
General characteristics
The mechanical structure of an aircraft is known as the airframe. This structure is typically considered to include the fuselage, undercarriage, empennage and wings, and excludes the propulsion system.
The Savoia-Marchetti S.55 was a double-hulled flying boat produced in Italy, beginning in 1924. Shortly after its introduction, it began setting records for speed, payload, altitude and range.
SIAI-Marchetti was an Italian aircraft manufacturer primarily active during the interwar period.
The Savoia-Marchetti S.74 was a four-engine airliner developed by Savoia-Marchetti for Ala Littoria.
The RB-1 Conestoga was a twin-engine, stainless steel cargo aircraft designed for the United States Navy during World War II by the Budd Company of Philadelphia, Pennsylvania. Although it did not see service in a combat theater, it pioneered design innovations in American cargo aircraft, later incorporated in modern military cargo airlifters.
The Savoia-Marchetti SM.91 was a two-seat, twin-engined, Italian heavy fighter prototype, designed to compete in a 1942 revision to a long-range fighter-bomber contract offered by the Regia Aeronautica to Italian aircraft companies in 1938. The original 1938 specification yielded the Savoia-Marchetti SM.88, which the SM.91 was largely based on.
The Savoia-Marchetti SM.95 was an Italian four-engine, mid-range transport aircraft, which first flew in 1943. It was the successor of the Savoia-Marchetti SM.75.
The Savoia-Marchetti SM.78 was an Italian bomber/reconnaissance biplane flying boat of the early 1930s.
The Savoia-Marchetti SM.62 was an Italian single-engine maritime patrol flying boat produced from 1926. It served with the Regia Aeronautica and with a number of foreign users, and was licence-produced in Spain and the Soviet Union. Some of the Spanish aircraft were still in service during the Spanish Civil War
The Fleetwings BT-12 Sophomore, also known by the company designation Model 23, was a 1940s all-metal basic training monoplane built by Fleetwings for the United States Army Air Forces. Only 24 production examples of the type were built before the contract was cancelled.
Enea Bossi Sr. was an Italian-American aerospace engineer and aviation pioneer. He is best known for designing the Budd BB-1 Pioneer, the first stainless steel aircraft; and the Pedaliante airplane, disputably credited with the first fully human-powered flight.
The Macchi M.C.100 was an Italian commercial flying boat designed and built by Macchi.
The Fleetwings Sea Bird was an American-built amphibious aircraft of the 1930s.
The Savoia-Marchetti S.59 was a 1920s Italian reconnaissance/bomber flying boat designed and built by Savoia-Marchetti for the Regia Aeronautica.
The Savoia-Marchetti S.66 was a 1930s Italian twin-hull flying boat designed and built by Savoia-Marchetti as an enlarged development of the S.55.
The Savoia-Marchetti S.56 was an Italian single-engine biplane flying boat trainer and tourer, built by Savoia-Marchetti.
The SIAI S.58 or Savoia-Marchetti S.M.58 was an Italian flying boat fighter prototype of the 1920s designed and manufactured by SIAI.
The SIAI S.67 or Savoia Marchetti SM.67 was an Italian flying boat fighter of the early 1930s designed and manufactured by SIAI.
The Savoia-Marchetti SM.80 was a two-seat monoplane amphibian tourer, with a single, tractor engine mounted above the wing, designed in Italy in the early 1930s. The SM.80bis was a four-seat variant, powered by two pusher engines.
The Boeing-Canada A-213 Totem was a Canadian single-engine pusher monoplane flying boat intended for forestry and fisheries patrols as well as a light utility transport for the British Columbia coastline, where there are few flat places for runways, and waterways are plentiful. The sole example, CF-ARF, CB10 was designed and built by Boeing Aircraft of Canada. The name refers to the Totem poles used by the First Nations in British Columbia.
 | Wikimedia Commons has media related to Budd BB-1 Pioneer . |