Bush pump

Last updated

The bush pump, also known as the Zimbabwe bush pump, is a positive displacement pump based on lever action [1] used to extract water from a bore hole well. It is the standard hand pump in Zimbabwe, and is used in Zimbabwe and Namibia. There are approximately 40 000 pumps (2009) [2] in Zimbabwe, and annually about 3000 pumps are installed. [3]

Contents

History

The original version was designed in 1933 as a closed-top cylinder pump. Around 1960 the design was modernized. The base of the well was from then on bolted to the well casing. It was at this point the pump got its current name, and this design became the national standard for hand pumps in Zimbabwe. [4] After Zimbabwe’s independence in 1980, the government created its own modernized version of the pump, B-type Zimbabwe Bush Pump. The new pump integrated the features from the earlier pumps. [5] This is the current standard [4] (2009).

The pump is today regarded by many as a national treasure, and was in 1997 pictured on its own postal stamp. [2]

Technical description

As other positive displacement pumps the Bush Pump is constructed around a down-hole cylinder containing a piston, that lifts water with every lever stroke. [6] The pump's signifying feature is the hardwood block that acts as a bearing and its lever mechanism. [7] [2] Besides this, the pump has an untraditional construction where the well base is bolted directly to the top of the well casing, sticking out of the bore hole. [7] It extracts water from a depth up of 18 to 100m, [8] and can support a usage up to 250 people. [9]

Installation and maintenance

The bush pump is easy and inexpensive to build, modify and maintain; [5] [10] still the pump has to be installed by experienced mechanics. Lifting tackles and other special equipment is used to install the component that are inserted into the bore hole. The installation is mostly done by the government of Zimbabwe and different NGOs.

The pump is maintained through a system consisting of three levels of responsibility:

1. At the direct user level, a committee and a caretaker is chosen by the users. They are responsible for minor functional maintenance, for instance oiling the pump and tightening bolts.

2. At the ward level there is a trained pump mechanic who repairs broken pumps, and keeps maintenance records.

3. At the district level a water supply operative is in charge of larger maintenance operations, and has access to vehicles and equipment for transporting larger pump components. [7]

Analysis

The bush pump has been the subject of scholarly studies. In their article, “The Zimbabwe Bush Pump: Mechanics of a Fluid Technology", [11] Marianne de Laet and Annemarie Mol analyze the pumps role as an appropriate technology. They focus on the fluidity of the pump, meaning its flexibility both when it comes to how it was invented, how it is used, and what function it has. They make their case by showing that the pump was not invented by one human actor (the opposite of what they call heroic actorship), but through a slow process of fluid actorship, where there is not one clear human creator. The use of the pump is also fluid, it does not only give water to a community, but the construction of the pump can serve an important ceremonial function both locally and nationally. The pump can also be said to be fluid in how it reacts to decay. Even if seemingly essential parts of it mechanics is broken; it can serve functions not intended by any of its creators. The pump is not only its physical appearance or its technical description, Laet and Mol argues:

The first aspect of the pump’s fluidity is that its boundaries are not solid and sharp. The Pump is a mechanical object, it is a hydraulic system, but it is also a device installed by the community, a health promoter and a nation-building apparatus. It has each of these identities – and each comes with its own different boundaries. ... In each of its identities the Bush Pump contains a variant of its environment. [12]

Laet and Mol argue that their way of analyzing the bush pump can be helpful when trying to understand a wide variety of objects and practices.

See also

Related Research Articles

<span class="mw-page-title-main">Pump</span> Device that imparts energy to the fluids by mechanical action

A pump is a device that moves fluids, or sometimes slurries, by mechanical action, typically converted from electrical energy into hydraulic energy.

<span class="mw-page-title-main">Drill</span> Tool used to create holes

A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver chuck. Hand-operated types are dramatically decreasing in popularity and cordless battery-powered ones proliferating due to increased efficiency and ease of use.

<span class="mw-page-title-main">Pumpjack</span> Drive for a reciprocating piston pump in an oil well

A pumpjack is the overground drive for a reciprocating piston pump in an oil well.

<span class="mw-page-title-main">Hydraulic engineering</span> Sub-discipline of civil engineering concerned with the flow and conveyance of fluids

Hydraulic engineering as a sub-discipline of civil engineering is concerned with the flow and conveyance of fluids, principally water and sewage. One feature of these systems is the extensive use of gravity as the motive force to cause the movement of the fluids. This area of civil engineering is intimately related to the design of bridges, dams, channels, canals, and levees, and to both sanitary and environmental engineering.

<span class="mw-page-title-main">Plain bearing</span> Simplest type of bearing, comprising just a bearing surface and no rolling elements

A plain bearing, or more commonly sliding contact bearing and slide bearing, is the simplest type of bearing, comprising just a bearing surface and no rolling elements. Therefore, the journal slides over the bearing surface. The simplest example of a plain bearing is a shaft rotating in a hole. A simple linear bearing can be a pair of flat surfaces designed to allow motion; e.g., a drawer and the slides it rests on or the ways on the bed of a lathe.

<span class="mw-page-title-main">Drilling rig</span> Integrated system to drill wells

A drilling rig is an integrated system that drills wells, such as oil or water wells, or holes for piling and other construction purposes, into the earth's subsurface. Drilling rigs can be massive structures housing equipment used to drill water wells, oil wells, or natural gas extraction wells, or they can be small enough to be moved manually by one person and such are called augers. Drilling rigs can sample subsurface mineral deposits, test rock, soil and groundwater physical properties, and also can be used to install sub-surface fabrications, such as underground utilities, instrumentation, tunnels or wells. Drilling rigs can be mobile equipment mounted on trucks, tracks or trailers, or more permanent land or marine-based structures. The term "rig" therefore generally refers to the complex equipment that is used to penetrate the surface of the Earth's crust.

<span class="mw-page-title-main">Geothermal heating</span> Use of geothermal energy for heating

Geothermal heating is the direct use of geothermal energy for some heating applications. Humans have taken advantage of geothermal heat this way since the Paleolithic era. Approximately seventy countries made direct use of a total of 270 PJ of geothermal heating in 2004. As of 2007, 28 GW of geothermal heating capacity is installed around the world, satisfying 0.07% of global primary energy consumption. Thermal efficiency is high since no energy conversion is needed, but capacity factors tend to be low since the heat is mostly needed in the winter.

<span class="mw-page-title-main">History of fluid mechanics</span>

The history of fluid mechanics is a fundamental strand of the history of physics and engineering. The study of the movement of fluids and the forces that act upon them dates back to pre-history. The field has undergone a continuous evolution, driven by human dependence on water, meteorological conditions and internal biological processes.

<span class="mw-page-title-main">Centrifugal pump</span> Pump used to transport fluids by conversion of rotational kinetic energy

Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor. They are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber (casing), from which it exits.

<span class="mw-page-title-main">Hand pump</span> Type of manually operated pump

Hand pumps are manually operated pumps; they use human power and mechanical advantage to move fluids or air from one place to another. They are widely used in every country in the world for a variety of industrial, marine, irrigation and leisure activities. There are many different types of hand pump available, mainly operating on a piston, diaphragm or rotary vane principle with a check valve on the entry and exit ports to the chamber operating in opposing directions. Most hand pumps are either piston pumps or plunger pumps, and are positive displacement.

<span class="mw-page-title-main">Screw mechanism</span> Mechanism that converts motion, and forces, from rotational to linear

A screw is a mechanism that converts rotational motion to linear motion, and a torque to a linear force. It is one of the six classical simple machines. The most common form consists of a cylindrical shaft with helical grooves or ridges called threads around the outside. The screw passes through a hole in another object or medium, with threads on the inside of the hole that mesh with the screw's threads. When the shaft of the screw is rotated relative to the stationary threads, the screw moves along its axis relative to the medium surrounding it; for example rotating a wood screw forces it into wood. In screw mechanisms, either the screw shaft can rotate through a threaded hole in a stationary object, or a threaded collar such as a nut can rotate around a stationary screw shaft. Geometrically, a screw can be viewed as a narrow inclined plane wrapped around a cylinder.

Artificial lift refers to the use of artificial means to increase the flow of liquids, such as crude oil or water, from a production well. Generally this is achieved by the use of a mechanical device inside the well or by decreasing the weight of the hydrostatic column by injecting gas into the liquid some distance down the well. A newer method called Continuous Belt Transportation (CBT) uses an oil absorbing belt to extract from marginal and idle wells. Artificial lift is needed in wells when there is insufficient pressure in the reservoir to lift the produced fluids to the surface, but often used in naturally flowing wells to increase the flow rate above what would flow naturally. The produced fluid can be oil, water or a mix of oil and water, typically mixed with some amount of gas.

Directional boring, also referred to as horizontal directional drilling (HDD), is a minimal impact trenchless method of installing underground utilities such as pipe, conduit, or cables in a relatively shallow arc or radius along a prescribed underground path using a surface-launched drilling rig. Directional boring offers significant environmental advantages over traditional cut and cover pipeline/utility installations. The technique is routinely used when conventional trenching or excavating is not practical or when minimal surface disturbance is required.

<span class="mw-page-title-main">Hydraulophone</span> Hydraulic musical instrument

A hydraulophone is a tonal acoustic musical instrument played by direct physical contact with water where sound is generated or affected hydraulically. The hydraulophone was described and named by Steve Mann in 2005, and patented in 2011. Typically, sound is produced by the same hydraulic fluid in contact with the player's fingers. It has been used as a sensory exploration device for low-vision individuals.

<span class="mw-page-title-main">Completion (oil and gas wells)</span> Last operation for oil and gas wells

Well completion is the process of making a well ready for production after drilling operations. This principally involves preparing the bottom of the hole to the required specifications, running in the production tubing and its associated down hole tools as well as perforating and stimulating as required. Sometimes, the process of running in and cementing the casing is also included. After a well has been drilled, should the drilling fluids be removed, the well would eventually close in upon itself. Casing ensures that this will not happen while also protecting the wellstream from outside incumbents, like water or sand.

<span class="mw-page-title-main">Well</span> Excavation or structure to provide access to groundwater

A well is an excavation or structure created in the ground by digging, driving, or drilling to access liquid resources, usually water. The oldest and most common kind of well is a water well, to access groundwater in underground aquifers. The well water is drawn up by a pump, or using containers, such as buckets or large water bags that are raised mechanically or by hand. Water can also be injected back into the aquifer through the well. Wells were first constructed at least eight thousand years ago and historically vary in construction from a simple scoop in the sediment of a dry watercourse to the qanats of Iran, and the stepwells and sakiehs of India. Placing a lining in the well shaft helps create stability, and linings of wood or wickerwork date back at least as far as the Iron Age.

Water supply and sanitation in Zimbabwe is defined by many small scale successful programs but also by a general lack of improved water and sanitation systems for the majority of Zimbabwe. According to the World Health Organization in 2012, 80% of Zimbabweans had access to improved, i.e. clean, drinking-water sources, and only 40% of Zimbabweans had access to improved sanitation facilities. Access to improved water supply and sanitation is distinctly less in rural areas. There are many factors which continue to determine the nature, for the foreseeable future, of water supply and sanitation in Zimbabwe. Three major factors are the severely depressed state of the Zimbabwean economy, the willingness of foreign aid organizations to build and finance infrastructure projects, and the political stability of the Zimbabwean state.

<span class="mw-page-title-main">Failures of water supply and sanitation systems</span>

Failures of water supply and sanitation systems describe situations where water supply and sanitation systems have been put in place (for example by the government or by non-government organizations but have failed to meet the expected outcomes. Often this is due to poor planning, lack of choice of appropriate technology depending upon the context, insufficient stakeholder involvement at the various stages of the project and lack of maintenance. While Hygiene Behavior Change is important in achieving the health benefits of improved WASH systems, the achievement of sustainability of WASH infrastructure depends on creation of demand for sanitation services.

<span class="mw-page-title-main">Self-supply of water and sanitation</span> Incremental improvements to water and sanitation services, mainly financed by the user

Self-supply of water and sanitation refers to an approach of incremental improvements to water and sanitation services, which are mainly financed by the user. People around the world have been using this approach over centuries to incrementally upgrade their water and sanitation services. The approach does not refer to a specific technology or type of water source or sanitation service although it does have to be feasible to use and construct at a low cost and mostly using tools locally available. The approach is rather about an incremental improvement of these services. It is a market-based approach and commonly does not involve product subsidies.

References

  1. ↑ "Bush Pump". RWSN. Retrieved 2019-05-09.
  2. 1 2 3 "Manual : The Zimbabwe Bush Pump" (PDF). Clean-water-for-laymen.com. Retrieved 18 February 2015.
  3. ↑ https://web.archive.org/web/20070426040832/http://www.rwsn.ch/documentation/skatdocumentation.2005-11-15.9771077921/file. Archived from the original on April 26, 2007. Retrieved April 18, 2011.{{cite web}}: Missing or empty |title= (help)
  4. 1 2 Archived April 26, 2007, at the Wayback Machine
  5. 1 2 "Zimbabwe Bush Pumps". Clean-water-for-laymen.com. 2015-01-22. Retrieved 2015-02-18.
  6. ↑ "Appendix K: How to make a Bush handpump (Zimbabwe hand pump)". Archived from the original on April 14, 2011. Retrieved April 18, 2011.
  7. 1 2 3 Archived March 17, 2012, at the Wayback Machine
  8. ↑ [ dead link ]
  9. ↑ De Laet, Marianne; Mol, Annemarie (April 2000). "The Zimbabwe Bush Pump: Mechanics of a Fluid Technology" (PDF). Social Studies of Science. Sss.sagepub.com. 30 (2): 225–263. doi:10.1177/030631200030002002. S2CID   111074213.
  10. ↑ (PDF) https://web.archive.org/web/20110626130458/http://www.villagevolunteers.org/PDFs/Travel%20Documents/Projects%20Library/Agriculture/Hand%20Powered%20Water%20Pumps.pdf. Archived from the original (PDF) on June 26, 2011. Retrieved April 18, 2011.{{cite web}}: Missing or empty |title= (help)
  11. ↑ De Laet, Marianne; Mol, Annemarie (April 2000). "The Zimbabwe Bush Pump: Mechanics of a Fluid Technology" (PDF). Social Studies of Science. Sss.sagepub.com. 30 (2): 225–263. doi:10.1177/030631200030002002. S2CID   111074213.
  12. ↑ "Situating Technoscience: An Inquiry into Spatialities" (PDF). Doc.utwente.nl. Retrieved 18 February 2015.

De Laet M, Mol A (2000) The Zimbabwe Bush Pump: Mechanics of a fluid technology. Social Studies of Science 30(2): 225–263.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.