C&C 44

Last updated

C&C 44
Development
Designer Robert W. Ball
Location Canada
Year1985
Builder(s) C&C Yachts
NameC&C 44
Boat
Boat weight 20,906 lb (9,483 kg)
Draft 8.25 ft (2.51 m)
Hull
Type Monohull
Construction Fibreglass
LOA 44.17 ft (13.46 m)
LWL 35.25 ft (10.74 m)
Beam 13.25 ft (4.04 m)
Engine type Yanmar 4JHE diesel engine 44 hp (33 kW)
Hull appendages
Keel/board typefin keel
Ballast9,850 lb (4,468 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig type Bermuda rig
I foretriangle height59.00 ft (17.98 m)
J foretriangle base17.50 ft (5.33 m)
P mainsail luff51.75 ft (15.77 m)
E mainsail foot15.75 ft (4.80 m)
Sails
Sailplan Masthead sloop
Mainsail area407.53 sq ft (37.861 m2)
Jib/genoa area516.25 sq ft (47.961 m2)
Total sail area923.78 sq ft (85.822 m2)
Racing
PHRF 66 (average)
[ edit on Wikidata]

The C&C 44 and the C&C 44 Custom are a series of Canadian sailboats, that were designed by Robert W. Ball and first built in 1985. [1] [2]

Contents

Production

The C&C 44 design prototype was built by C&C Yachts in Canada and then production was undertaken in the United States at C&C's Middletown, Rhode Island plant, starting in 1985 and ending in 1991. The C&C 44 Custom was built by the Custom Division of C&C. The design is now out of production. [1] [3]

The C&C 44 was produced in two versions, Grand Prix and Custom. [4] A small amount of pre-preg fibreglass laminates were used for the hull and a spar from Hall Spars with four-spreaders. [4] The boats have full-height and full-length longitudinal stiffeners, and honeycomb panels with carbon fiber reinforced polymer skins. Nomex honeycomb was used for the deck. Once the laminate was laid up and vacuum bag moulded, heat was employed for the final cure. [4]

The prototype for the boat was known as Silver Shadow, and was requested by Jim Plaxton. Momentum was the first Custom model. [4] [5]

Design

The C&C 44 is a recreational keelboat, built predominantly of fibreglass, with wood trim. The hull is made with triaxial fibreglass cloth, laid on each side of a 3/4" end-grain balsawood core, to form a sandwich. It has a masthead sloop rig, a raked stem, a raised reverse transom, an internally-mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces 20,906 lb (9,483 kg) and carries 9,850 lb (4,468 kg) of ballast. [1] [6]

The C&C 44s built were highly customized and used many different ballast and keel combinations, as well as different rigs. A centreboard was a factory option. [1]

The design was also available as the "C&C 44 Custom", which used the same hull molds, but was more race-oriented. The Custom version incorporates more use of exotic construction materials, has a different coachhouse roof and deck, a simpler interior and a keel that is slightly longer. It is likely that fewer than four of the Custom model were completed in total. [7]

The keel-equipped version of the boat has a draft of 8.25 ft (2.51 m), while the centreboard-equipped version has a draft of 8.50 ft (2.59 m) with the centreboard extended and 5.5 ft (1.7 m) with it retracted. The Custom version has a draft of 8.42 ft (2.57 m). [1]

The boat is fitted with a Japanese Yanmar 4JHE diesel engine of 44 hp (33 kW) . The fuel tank holds 40 U.S. gallons (150 L; 33 imp gal) and the fresh water tank has a capacity of 100 U.S. gallons (380 L; 83 imp gal). [1]

The fixed keel-equipped C&C 44 has a PHRF racing average handicap of 66, while the centreboard version has a PHRF average handicap of 57 with a high of 66 and low of 48. All versions have a hull speed of 7.96 kn (14.74 km/h). [8] [9]

Operational history

In a July 1988 review, Lloyd Hircock wrote in Canadian Yachting magazine, "The C&C 44 is a splendid sea boat—dry, kindly, strong and seaworthy ... I rate the C&C 44 up there with the best of them. It is an impressive yacht to sail. It is strong and capable, and well designed for safe offshore passages for comfortable lake cruising. At the drop of a flag this design is ready to take to the race course." He did find fault with the inadequate cabin ventilation, the uncomfortable helm seat, as well as the aft genoa sheet track location and the location of the mainsheet traveller in the middle of the cockpit, which reduces cockpit seating space. [6]

See also

Similar sailboats

Related Research Articles

C&C 35 Sailboat class

The C&C 35, also called the Redwing 35, is a Canadian sailboat, that was designed by Cuthbertson & Cassian and first built in 1969.

C&C 27 Family of Canadian sailboats

The C&C 27 is a family of Canadian sailboats, that was designed by Robert W. Ball and first built in 1970. The design is out of production.

The Kirby 30 is a Canadian racing sailboat, that was designed by Bruce Kirby and first built in 1981.

Redline 25 Sailboat class

The Redline 25, sometimes called the C&C 25 Redline, is a Canadian sailboat, that was designed by C&C Design and first built in 1969.

C&C 33 Sailboat class

The C&C 33 is a series of Canadian sailboats, that were designed by Robert W. Ball of C&C Design and first built in 1974.

C&C 37/40

The C&C 37/40 is a Canadian 12.05 metres (39.5 ft) LOA fibreglass monohull sailing yacht, designed in 1988 by Robert W. Ball of Cuthbertson & Cassian as a replacement for the earlier C&C 37 dating from 1981. The C&C 37/40 is a recreational keelboat of moderate displacement, intended as a cruiser/racer or oceangoing racer. The yachts have a masthead sloop rig, with a fin keel and an internally-mounted spade-type rudder. Over 110 of the 37/40 type were built before the Canadian plant closed in 1994. The design is no longer produced.

Paceship PY 23 Sailboat class

The Paceship PY 23 is a Canadian trailerable sailboat, that was designed by John Deknatel of C. Raymond Hunt Associates and first built in 1973.

The C&C 32 is a Canadian sailboat, that was designed by C&C Design and first built in 1981.

C&C 34 Sailboat class

The C&C 34 is a Canadian sailboat, that was designed by Robert W. Ball and first built in 1977.

The C&C 36-1 is a Canadian sailboat that was designed by C&C Design and first built in 1977.

The C&C 37 is a Canadian sailboat, that was designed by Robert W. Ball of C&C Design and first built in 1981.

C&C 38

The C&C 38 is a series of Canadian sailboats, that were all designed by C&C Design and first built in 1973.

The C&C 40 is a series of Canadian sailboats, that were all designed by C&C Design and first built in 1968.

The C&C 41 is a Canadian sailboat, that was designed by Robert W. Ball at the request of Jim Plaxton, who had purchased C&C Yachts in 1981. Plaxton wanted an International Offshore Rule racer and the resulting design went into production in 1981.

The C&C 42 Custom is a Canadian sailboat, that was designed by C&C Design and first built in 1976.

C&C 43-1 Sailboat class

The C&C 43-1 is a Canadian sailboat, that was designed by Cuthbertson & Cassian and first built in 1971.

The C&C 46 is a Canadian sailboat, that was designed by C&C Design and first built in 1973.

The C&C 50 is a Canadian sailboat, that was designed by C&C Design and first built in 1972.

The C&C 51 Custom is a Canadian sailboat, that was designed by Robert W. Ball and first built in 1986.

The C&C SR 25 is a Canadian racing sailboat that was designed by Glenn Henderson and first built in 1996.

References

  1. 1 2 3 4 5 6 Browning, Randy (2018). "C&C 44 sailboat specifications and details". sailboatdata.com. Archived from the original on 31 March 2022. Retrieved 12 September 2018.
  2. ↑ McArthur, Bruce (2022). "Robert Ball". sailboatdata.com. Archived from the original on 15 October 2020. Retrieved 30 March 2022.
  3. ↑ McArthur, Bruce (2022). "C&C Yachts". sailboatdata.com. Archived from the original on 15 October 2020. Retrieved 30 March 2022.
  4. 1 2 3 4 Killing, Steve (December 1984). "C&C Custom 44 - Exotic or blackwall". Canadian Yachting . Archived from the original on 31 March 2022. Retrieved 31 March 2022.
  5. ↑ Royal Canadian Yacht Club. "RCYC Models - Panel 11". rcyc.ca. Archived from the original on 31 March 2022. Retrieved 31 March 2022.
  6. 1 2 Hircock, Lloyd (July 1988). "C&C 44". Canadian Yachting . Archived from the original on 31 March 2022. Retrieved 12 September 2018.
  7. ↑ Browning, Randy (2018). "C&C 44 Custom sailboat specifications and details". sailboatdata.com. Archived from the original on 31 March 2022. Retrieved 12 September 2018.
  8. ↑ InterVisionSoft LLC (2018). "Sailboat Specifications for C&C 44". Sailing Joy. Archived from the original on 12 September 2018. Retrieved 12 September 2018.
  9. ↑ InterVisionSoft LLC (2018). "Sailboat Specifications for C&C 44 CB". Sailing Joy. Archived from the original on 13 September 2018. Retrieved 12 September 2018.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.