| FC.20 | |
|---|---|
 | |
| Role | Ground attack |
| National origin | Italy |
| Manufacturer | Construzioni Aeronautiche Novaresi S.A. (FIAT) (CANSA) |
| First flight | 12 April 1941 |
| Number built | c.6 |
The CANSA FC.20 was a twin engine reconnaissance bomber/ground attack monoplane designed and built in Italy in 1941. Several versions with different armament and engines were flown but only the FC.20bis ground attack variant reached squadron service, in very small numbers, before the 1943 armistice.
The FC.20 was originally intended as a reconnaissance bomber but was developed instead as a ground attack aircraft. The first prototype first flew on 12 April 1941, piloted by Moroni. Four variants were structurally and aerodynamically similar apart from the front fuselage detail and engine installations. [1]
The FC.20 was a cantilever low wing monoplane with a straight tapered wing of aspect ratio about 6.4. The leading edge was almost unswept and the tips rounded. The wing had positive dihedral outboard of the engines. The trailing edges carried short span, tabbed ailerons and split flaps which reached past the lower engine fairings to the wing roots. The twin engines were mounted forward of the leading edge with the propeller shaft in the wing plane; the mainwheels of the conventional undercarriage retracted backwards into the extended underwing engine fairings. The FC.20 had a twin tail, with elliptically shaped endplate vertical surfaces almost equally divided vertically between fin and rudder. These were mounted on a tapered tailplane with significant dihedral, carrying tabbed, tapered elevators. The rear fuselage extended beyond the empennage, providing a housing for the retractable tailwheel. [1]
In the unarmed reconnaissance bomber first prototype FC.20, the side-by-side cockpit was placed above the wing leading edge. A long glazed nose extended forwards from the cockpit to beyond the plane of the propellers. [1]
The second, ground attack FC.20bis prototype differed chiefly from the first in having a shortened nose, a cockpit placed ahead of the wing leading edge and full armament, though there was also a slight increase in wing area. The solid nose contained a 37 mm (1.46 in) Breda cannon, supplemented by a pair of 12.7 mm (0.5 in) Scotti machine guns in the wing roots. An enclosed, rotating dorsal turret to the rear of the cockpit but still over the wing contained a similar machine gun. Two 160 kg (352 lb) bombs could be released from external wing mountings and small bombs from within the fuselage. [1]
Two other variants also flew, both distinguished chiefly by their engines. The FC.20ter was a modification of the FC.20 with 745 kW (1,000 hp) Fiat A.80 R.C.41 radials. Unlike the FC.20, this aircraft had the dorsal turret of the FC.20bis and a nose-mounted, long-barrelled cannon. The sole FC.20quater was one of the few production FC.20bis aircraft, re-engined with 935 kW (1,250 hp) Daimler-Benz DB 601 V-12, liquid-cooled motors. It was fitted with a 37 mm (1.46 in) Mauser Ikaria cannon and a pair of 20 mm (0.79 in) cannon replaced the wing root machine guns of the FC.20bis. Tested in 1943, it flew higher and 80 kmh (50 mph) faster than the FC.20bis. [1]
A few production FC.20bis were built, and it is known that three served the 174a Squadriglia Ricognizione Strategica in July 1943 but were not used operationally. [1] Italian military operations ceased with the armistice of September 1943.
Data fromItalian Civil and Military Aircraft 1930-1945 [1]
General characteristics
Performance
Armament
Aircraft of comparable role, configuration, and era
The Heinkel He 111 is a German airliner and bomber designed by Siegfried and Walter Günter at Heinkel Flugzeugwerke in 1934. Through development, it was described as a "wolf in sheep's clothing". Due to restrictions placed on Germany after the First World War prohibiting bombers, it was presented solely as a civil airliner, although from conception the design was intended to provide the nascent Luftwaffe with a heavy bomber.
The Junkers Ju 188 was a German Luftwaffe high-performance medium bomber built during World War II, the planned follow-up to the Ju 88 with better performance and payload. It was produced only in limited numbers, due both to the presence of improved versions of the Ju 88, as well as the increasingly effective Allied strategic bombing campaign against German industry and the resulting focus on fighter production.
The Dornier Do 217 was a bomber used by the German Luftwaffe during World War II as a more powerful development of the Dornier Do 17, known as the Fliegender Bleistift. Designed in 1937 and 1938 as a heavy bomber but not meant to be capable of the longer-range missions envisioned for the larger Heinkel He 177, the Do 217's design was refined during 1939 and production began in late 1940. It entered service in early 1941 and by the beginning of 1942 was available in significant numbers.
The Fiat CR.32 was an Italian biplane fighter used in the Spanish Civil War and the Second World War. Designed by the aeronautical engineer Celestino Rosatelli, it was a compact, robust and highly manoeuvrable aircraft for its era, leading to it being a relatively popular fighter during the 1930s.
The Yakovlev Yak-2 was a short-range Soviet light bomber/reconnaissance aircraft used during World War II. It was produced in small numbers, and most of them were destroyed during the opening stages of Operation Barbarossa.
The Fiat BR.20 Cicogna was a low-wing twin-engine medium bomber that was developed and manufactured by Italian aircraft company Fiat. It holds the distinction of being the first all-metal Italian bomber to enter service; at the time, it was regarded as one of the most modern medium bombers in the world.
The Breda Ba.88 Lince ("Lynx") was a ground-attack aircraft used by the Italian Regia Aeronautica during World War II. Its streamlined design and retractable undercarriage were advanced for the time, and after its debut in 1937 the aircraft established several world speed records. However, when military equipment was installed on production examples, problems of instability developed and the aeroplane's general performance deteriorated. Eventually its operational career was cut short, and the remaining Ba.88 airframes were used as fixed installations on airfields to mislead enemy reconnaissance. It represented, perhaps, the most remarkable failure of any operational aircraft to see service in World War II.
The CANT Z.1007 Alcione (Kingfisher) was an Italian three-engined medium bomber, with wooden structure. Designed by Filippo Zappata, who also designed the CANT Z.506 it had "excellent flying characteristics and good stability" and was regarded by some as "the best Italian bomber of World War II" although its wooden structure was easily damaged by the climate, as experienced in North Africa and in Russia. It was used by the Italian Regia Aeronautica, Italian Co-Belligerent Air Force, Aeronautica Nazionale Repubblicana and Luftwaffe during World War II.
The Fiat CR.25 was an Italian twin-engine reconnaissance-fighter aircraft which served in small numbers for the Regia Aeronautica during World War II.
The Breda Ba.201 was an Italian dive bomber designed during World War II, that never entered production.
The Piaggio P.119 was an Italian experimental fighter of World War II. It had a relatively novel layout, with a "buried" radial engine mounted mid-fuselage. Only a single prototype was built before the Armistice between Italy and the allied armed forces, which ended the project.
The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.
The Caproni Ca.311 was a light bomber-reconnaissance aircraft produced in Italy prior to and during World War II.
The Fiat BRG was an Italian heavy bomber prototype built in the 1930s by Fiat for the Italian Air Force.
The PZL.49 Miś was a Polish twin-engined medium bomber design that remained only a project due to the outbreak of World War II. The PZL.49 was based on the contemporary PZL.37 Łoś and was to replace it at production lines at the PZL works.
The Loire-Nieuport 10 was a 1930s French prototype long-range maritime reconnaissance and combat floatplane produced by Loire-Nieuport, a joint venture between Loire Aviation and Nieuport-Delage. It was an attempt to answer the requirements for the Navy's programme Hydravion éclaireur de combat for a large floatplane capable of acting as a torpedo bomber or reconnaissance aircraft.
The Caproni Ca.355 Tuffo was a low-wing single-engine dive bomber, designed and built by the Italian Caproni company in 1941, which never proceeded beyond a single prototype. Derived from Ca.335 Mistral, the Ca.355 was proposed to equip the Regia Aeronautica, but it was found to offer little advantage over the German Junkers Ju 87 "Stuka" and the project was abandoned.
The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.
The Bloch MB.480 was a French twin-engined torpedo-bomber/reconnaissance floatplane designed just before the start of the Second World War by Société des Avions Marcel Bloch. Only two were built, the French Navy deciding to use landplanes instead.
The CANT Z.515 was a twin engine monoplane floatplane designed and built for maritime reconnaissance in Italy at the start of World War II. It did not go into service.
