Company type | Subsidiary |
---|---|
Industry | Ammunition |
Founded | 1951 |
Founder | Dick Speer |
Headquarters | Lewiston, Idaho, U.S. |
Products | Cartridges |
Parent | Vista Outdoor |
Website | www |
CCI (Cascade Cartridge Inc.), based in Lewiston, Idaho, manufactures rimfire ammunition, centerfire handgun ammunition, and primers for reloaders and industrial ammunition production. CCI made the first mini-mag rimfire ammunition in 1963, and in 1975 developed the Stinger, a high velocity .22 Long Rifle product. Today, CCI makes a wide range of rimfire and snake shot ammunition. [1]
CCI was founded by Dick Speer (brother of Vernon Speer, who founded Speer Bullets) in the early 1950s. Arvid Nelson was a partner in the business. The firm's first shipment was part of a defense contract to make primers using chlorate FA-70. CCI later moved on to much safer formulas for sporting ammunition. CCI provided the first reliable supply of primers for hobby reloaders. [2]
As of February 2015, it was a subsidiary of Vista Outdoor, a spinoff of Alliant Techsystems. [3] As of the same date, CCI employed about 1,100 people. [4]
CCI purchased 17 acres of land next to the Lewiston Gun Club. When the gun club moved, CCI purchased that land as well. As of 2020, CCI's plant was still located on this land. [5]
In 1975, CCI engineers completed development of the first "hyper-velocity" .22 long rifle ammunition. This ammunition became known as the "CCI Stinger." [6]
In early 2020, CCI introduced 14 new products. [7]
CCI/Speer sells the Gold Dot line, component bullets, and handgun ammunition using a bonded copper-plated hollow point bullet. Plated bullets were originally sold only for handloading as a cheap substitute for jacketed bullets. [8] [9]
CCI sells the MeatEater line of hunting ammunition for small game. CCI partnered with Steven Rinella of MeatEater to produce and market this product line. The MeatEater line of ammunition includes Copper-22, Mini-Mag, and Maxi-Mag variants. [10]
In 2023, CCi introduced Clean-22 Hyper Velocity ammunition; this adds to their line of polymer-coated rimfire ammunition. Polymer coatings significantly reduce lead fouling in barrels. [11]
Handloading, or reloading, is the practice of making firearm cartridges by assembling the individual components, rather than purchasing mass-assembled, factory-loaded ammunition.
A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.
This is a table of selected pistol/submachine gun and rifle/machine gun cartridges by common name. Data values are the highest found for the cartridge, and might not occur in the same load.
The .40 S&W (10.2x22mm) is a rimless pistol cartridge developed jointly by American firearms manufacturers Smith & Wesson and Winchester in 1990. The .40 S&W was developed as a law enforcement cartridge designed to duplicate performance of the Federal Bureau of Investigation's (FBI) reduced-velocity 10mm Auto cartridge which could be retrofitted into medium-frame semi-automatic handguns. It uses 0.40-inch (10 mm) diameter bullets ranging in weight from 105 to 200 grains.
The .45 GAP or .45 Glock (11.43×19mm) is a pistol cartridge designed by Ernest Durham, an engineer with CCI/Speer, at the request of firearms manufacturer Glock to provide a cartridge that would equal the power of the .45 ACP, have a stronger case head to reduce the possibility of case neck blowouts, and be shorter to fit in a more compact handgun. The .45 GAP is the first commercially introduced cartridge that has been identified with Glock.
The .357 SIG is a bottlenecked rimless centerfire handgun cartridge developed by the Swiss-German firearms manufacturer SIG Sauer, in cooperation with ammunition manufacturer Federal Premium. The cartridge is used by a number of law enforcement agencies.
A rim-fire is a type of metallic cartridge used in firearms, where the primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845, by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the early 19th century, such as teat-fire and pinfire, only small caliber rimfire and centerfire cartridges have survived to the present day with regular use. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition found in the world today in terms of units manufactured and sold.
The .22 Long Rifle, also known as the .22LR or 5.6×15mmR, is a long-established variety of .22 caliber rimfire ammunition originating from the United States. It is used in a wide range of firearms including rifles, pistols, revolvers, and submachine guns.
.22 Short is a variety of .22 caliber (5.6 mm) rimfire ammunition. Developed in 1857 for the first Smith & Wesson revolver, the .22 rimfire was the first American metallic cartridge. The original loading was a 29 or 30 gr bullet and 4 gr of black powder. The original .22 rimfire cartridge was renamed .22 Short with the introduction of the .22 Long in 1871.
The .22 Long is a variety of .22 caliber (5.6 mm) rimfire ammunition. The .22 Long is the second-oldest of the surviving rimfire cartridges, dating back to 1871, when it was loaded with a 29 gr (1.9 g) bullet and 5 gr (0.32 g) of black powder, 25% more than the .22 Short on which it was based. It was designed for use in revolvers, but was soon chambered in rifles as well, in which it gained a reputation as a small game cartridge.
The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).
A headstamp is the markings on the bottom of a cartridge case designed for a firearm. It usually tells who manufactured the case. If it is a civilian case it often also tells the caliber: if it is military, the year of manufacture is often added.
The .375 Remington Ultra Magnum, also known as the .375 RUM is a .375 rifle cartridge introduced by Remington Arms in 2000. The cartridge is intended for large and dangerous game.
.17 Hornady Magnum Rimfire, commonly known as the .17 HMR, is a rimfire rifle cartridge developed by Hornady in 2002. It was developed by necking down a .22 Winchester Magnum Rimfire case to take a .17 caliber (4.5 mm) projectile. Commonly loaded with a 17 grain projectile, it can deliver muzzle velocities in excess of 775 m/s (2,650 ft/s).
The .17 Hornady Mach 2, commonly known as the .17 HM2, is a rimfire cartridge introduced in 2004 by the ammunition manufacturer Hornady, following the successful launch in 2002 of the .17 HMR. The .17 HM2 is based on the .22 Long Rifle "Stinger" case, necked down to .17 caliber and using a bullet weighing less than half the weight of a typical .22 Long Rifle bullet.
Federal Premium Ammunition is a wholly-owned subsidiary of Vista Outdoor, located in Anoka, Minnesota. With a workforce of nearly 1,500, Federal manufactures shotshell, centerfire, and rimfire ammunition and components.
The 5 mm Remington Rimfire Magnum or 5 mm RFM is a bottlenecked rimfire cartridge introduced by Remington Arms Company in 1969. Remington chambered it in a pair of bolt-action rifles, the Model 591 and Model 592, but this ammunition never became very popular, and the rifles were discontinued in 1974. About 52,000 rifles and 30,000 barrels for the T/C Contender pistol were sold during its brief production run. Remington discontinued the cartridge itself in 1982, leaving owners with no source of ammunition.
The 6.5mm Creedmoor (6.5×48mm), designated 6.5 Creedmoor by SAAMI, 6.5 Creedmoor by the C.I.P. or 6.5 CM or 6.5 CRDMR for short, is a centerfire rifle cartridge introduced by Hornady in 2007. It was developed by Hornady senior ballistics scientist Dave Emary in partnership with Dennis DeMille, the vice-president of product development at Creedmoor Sports, hence the name. The cartridge is a necked-down modification of the .30 Thompson Center.
Vista Outdoor Inc. is an American designer, manufacturer, and marketer of outdoor sports and recreation products. It operates in two markets: shooting sports and outdoor products. It is a "house of brands" with more than 40 labels and subsidiaries. It trades under "VSTO" on the New York Stock Exchange.