CDMA frequency bands

Last updated

CDMA frequency bands or frequency ranges are the cellular frequencies designated by the ITU for the operation of cdmaOne and CDMA2000 mobile phones and other mobile devices. [1] [2] [3] [4]

Contents

Frequency bands

From the latest published version of the respective 3GPP2 technical standard (C.S0057-F), [5] the following table lists the specified frequency bands of the cdmaOne and CDMA2000 standards. [6] [7] [8]

Band
class
ƒ
(MHz)
Common
name
Uplink
(MHz)
Downlink
(MHz)
Duplex
spacing
(MHz)
0800800 MHz815 - 849860 - 89445
119001900 MHz1850 - 19101930 - 199080
2900TACS872 - 915917 - 96045
3850JTACS887 - 925832 - 870-55
41800Korean PCS1750 - 17801840 - 187090
5450450 MHz410 - 483420 - 49310
621002 GHz1920 - 19802110 - 2170190
7700Upper 700 MHz776 - 788746 - 758-30
818001800 MHz1710 - 17851805 - 188095
9900900 MHz880 - 915925 - 96045
10800Secondary 800 MHz806 - 891851 - 94045
11400400 MHz European PAMR410 - 483420 - 49310
12800800 MHz PAMR870 - 876915 - 92145
1325002.5 GHz IMT-2000 Extension2500 - 25702620 - 2690120
141900U.S. PCS 1.9 GHz1850 - 19151930 - 199580
151700AWS1710 - 17552110 - 2155400
162500U.S. 2.5 GHz2502 - 25682624 - 2690122
18700700 MHz Public Safety787 - 799757 - 769-30
19700Lower 700 MHz698 - 716728 - 74630
201600L-Band1626.5 - 1660.51525 - 1559-101.5
212000S-Band2000 - 20202180 - 2200180

    See also

    Related Research Articles

    GSM Cellular telephone network standard

    The Global System for Mobile Communications (GSM) is a standard developed by the European Telecommunications Standards Institute (ETSI) to describe the protocols for second-generation (2G) digital cellular networks used by mobile devices such as mobile phones and tablets. It was first deployed in Finland in December 1991. By the mid-2010s, it became a global standard for mobile communications achieving over 90% market share, and operating in over 193 countries and territories.

    A personal communications service (PCS) is set of communications capabilities that provide a combination of terminal mobility, personal mobility, and service profile management. This class of services comprises several types of wireless voice or wireless data communications systems, typically incorporating digital technology, providing services similar to advanced cellular mobile or paging services. In addition, PCS can also be used to provide other wireless communications services, including services that allow people to place and receive communications while away from their home or office, as well as wireless communications to homes, office buildings and other fixed locations. Described in more commercial terms, PCS is a generation of wireless cellular-phone technology, that combines a range of features and services surpassing those available in analogue- and first-generation (2G) digital-cellular phone systems, providing a user with an all-in-one wireless phone, paging, messaging, and data service.

    The Universal Mobile Telecommunications System (UMTS) is a third generation mobile cellular system for networks based on the GSM standard. Developed and maintained by the 3GPP, UMTS is a component of the International Telecommunication Union IMT-2000 standard set and compares with the CDMA2000 standard set for networks based on the competing cdmaOne technology. UMTS uses wideband code-division multiple access (W-CDMA) radio access technology to offer greater spectral efficiency and bandwidth to mobile network operators.

    3G Third generation of wireless mobile telecommunications technology

    3G is the third generation of wireless mobile telecommunications technology. It was the upgrade over 2G, 2.5G, GPRS and 2.75G EDGE networks, offering faster data transfer, and better voice quality. This network was superseded by 4G, and later on 5G. This network is based on a set of standards used for mobile devices and mobile telecommunications use services and networks that comply with the International Mobile Telecommunications-2000 (IMT-2000) specifications by the International Telecommunication Union. 3G finds application in wireless voice telephony, mobile Internet access, fixed wireless Internet access, video calls and mobile TV.

    CDMA2000

    CDMA2000 is a family of 3G mobile technology standards for sending voice, data, and signaling data between mobile phones and cell sites. It is developed by 3GPP2 as a backwards-compatible successor to second-generation cdmaOne (IS-95) set of standards and used especially in North America and South Korea.

    IMT-2000 is the global standard for third generation (3G) wireless communications as defined by the International Telecommunication Union.

    The 3rd Generation Partnership Project 2 (3GPP2) is a collaboration between telecommunications associations to make a globally applicable third generation (3G) mobile phone system specification within the scope of the ITU's IMT-2000 project. In practice, 3GPP2 is the standardization group for CDMA2000, the set of 3G standards based on the earlier cdmaOne 2G CDMA technology.

    4G is the fourth generation of broadband cellular network technology, succeeding 3G, and preceding 5G. A 4G system must provide capabilities defined by ITU in IMT Advanced. Potential and current applications include amended mobile web access, IP telephony, gaming services, high-definition mobile TV, video conferencing, and 3D television.

    The radio spectrum is the part of the electromagnetic spectrum with frequencies from 3 Hz to 3,000 GHz (3 THz). Electromagnetic waves in this frequency range, called radio waves, are widely used in modern technology, particularly in telecommunication. To prevent interference between different users, the generation and transmission of radio waves is strictly regulated by national laws, coordinated by an international body, the International Telecommunication Union (ITU).

    Evolution-Data Optimized

    Evolution-Data Optimized is a telecommunications standard for the wireless transmission of data through radio signals, typically for broadband Internet access. EV-DO is an evolution of the CDMA2000 (IS-2000) standard which supports high data rates and can be deployed alongside a wireless carrier's voice services. It uses advanced multiplexing techniques including code-division multiple access (CDMA) as well as time-division multiplexing (TDM) to maximize throughput. It is a part of the CDMA2000 family of standards and has been adopted by many mobile phone service providers around the world particularly those previously employing CDMA networks. It is also used on the Globalstar satellite phone network.

    GSM frequency bands or frequency ranges are the cellular frequencies designated by the ITU for the operation of GSM mobile phones and other mobile devices.

    This is a comparison of standards of mobile phones. A new generation of cellular standards has appeared approximately every tenth year since 1G systems were introduced in 1979 and the early to mid-1980s.

    Mobile broadband

    Mobile broadband is the marketing term for wireless Internet access via mobile networks. Access to the network can be made through a portable modem, wireless modem, or a tablet/smartphone or other mobile device. The first wireless Internet access became available in 1991 as part of the second generation (2G) of mobile phone technology. Higher speeds became available in 2001 and 2006 as part of the third (3G) and fourth (4G) generations. In 2011, 90% of the world's population lived in areas with 2G coverage, while 45% lived in areas with 2G and 3G coverage. Mobile broadband uses the spectrum of 225 MHz to 3700 MHz.

    The UMTS frequency bands are radio frequencies used by third generation (3G) wireless Universal Mobile Telecommunications System networks. They were allocated by delegates to the World Administrative Radio Conference (WARC-92) held in Málaga-Torremolinos, Spain between 3 February 1992 and 3 March 1992. Resolution 212 (Rev.WRC-97), adopted at the World Radiocommunication Conference held in Geneva, Switzerland in 1997, endorsed the bands specifically for the International Mobile Telecommunications-2000 (IMT-2000) specification by referring to S5.388, which states "The bands 1,885-2,025 MHz and 2,110-2,200 MHz are intended for use, on a worldwide basis, by administrations wishing to implement International Mobile Telecommunications 2000 (IMT-2000). Such use does not preclude the use of these bands by other services to which they are allocated. The bands should be made available for IMT-2000 in accordance with Resolution 212 ." To accommodate the reality that these initially defined bands were already in use in various regions of the world, the initial allocation has been amended multiple times to include other radio frequency bands.

    LTE Advanced Mobile communication standard

    LTE Advanced is a mobile communication standard and a major enhancement of the Long Term Evolution (LTE) standard. It was formally submitted as a candidate 4G to ITU-T in late 2009 as meeting the requirements of the IMT-Advanced standard, and was standardized by the 3rd Generation Partnership Project (3GPP) in March 2011 as 3GPP Release 10.

    LTE (telecommunication) Standard for wireless communication

    In telecommunications, Long-Term Evolution (LTE) is a standard for wireless broadband communication for mobile devices and data terminals, based on the GSM/EDGE and UMTS/HSPA standards. It improves on those standards' capacity and speed by using a different radio interface and core network improvements. LTE is the upgrade path for carriers with both GSM/UMTS networks and CDMA2000 networks. Because LTE frequencies and bands differ from country to country, only multi-band phones can use LTE in all countries where it is supported.

    International Mobile Telecommunications-Advanced are the requirements issued by the ITU Radiocommunication Sector (ITU-R) of the International Telecommunication Union (ITU) in 2008 for what is marketed as 4G mobile phone and Internet access service.

    5G Broadband cellular network standard (2016)

    In telecommunications, 5G is the fifth-generation technology standard for broadband cellular networks, which cellular phone companies began deploying worldwide in 2019, and is the planned successor to the 4G networks which provide connectivity to most current cellphones. 5G networks are predicted to have more than 1.7 billion subscribers worldwide by 2025, according to the GSM Association.

    Cellular frequencies are the sets of frequency ranges within the ultra high frequency band that have been assigned for cellular-compatible mobile devices, such as mobile phones, to connect to cellular networks. Most mobile networks worldwide use portions of the radio frequency spectrum, allocated to the mobile service, for the transmission and reception of their signals. The particular bands may also be shared with other radiocommunication services, e.g. broadcasting service, and fixed service operation.

    References

    1. "CDMA2000: Delivering on 3G.pdf" (PDF). International Telecommunication Union (ITU). Retrieved 3 February 2022.
    2. "About cdma2000". Keysight. Retrieved 3 February 2022.
    3. "cdmaOne Technology". Rohde&Schwarz. Retrieved 3 February 2022.
    4. "IMT-2000 Regulatory and Spectrum Considerations.pdf" (PDF). International Telecommunications Union (ITU). Retrieved 3 February 2022.
    5. "Band Class Specification for cdma2000 Spread Spectrum Systems.pdf" (PDF) (1.0 ed.). 3GPP2. September 2015. Retrieved 7 October 2021.
    6. "CDMA-2000 Frequency Bands". RFWel. Retrieved 3 February 2022.
    7. "CDMA frequency band". Sqimway. Retrieved 3 February 2022.
    8. "CDMA Radio Interface Frequency Bands". FrequencyChecker. Retrieved 3 February 2022.