CFAV Cougar (YAG 308)

Last updated

CFAV "Cougar" (YAG 308).png
CFAV "Cougar" (YAG 308)
History
Naval ensign of Canada.svg Canada
Operator Royal Canadian Navy
BuilderWithey's Shipyards Ltd.
In service1954-2007
Homeport CFB Esquimalt
IdentificationYFM-308 (1954); YFP-308 (1960); YAG-308 "Cougar" (1980)
StatusSold in 2011
General characteristics
TypeTraining vessel
Displacement70 tonnes (69 long tons)
Length75 ft 3 in (22.94 m)
Beam18 ft (5.5 m)
Draught2.6 m (8 ft 6 in)
Installed power Yanmar diesel generator
Propulsion2 × Detroit Diesel 6-71 series engines, 320 hp (239 kW)
Speed10 knots
Boats & landing
craft carried		 Zodiac launch
Complement12 - 14

Canadian Forces Auxiliary Vessel (CFAV) Cougar (YAG 308) was one of ten wooden YAG 300 (Yard Auxiliary, General) vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Cougar primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt. [1] [2] Her name was reused for PTC 61 Cougar Orca-class Patrol Craft Training (PCT) tender that replaced the YAG 300 vessels as the RCN training tenders in 2008. [3]

Contents

Design and layout

Like other YAG 300 vessels, Cougar was 75′ long overall, 18′6″ wide, had a draft of 4′6″, measured 70 tonnes, and was powered by twin 6-71 Detroit Diesel engines. Cougar was arranged in typical naval fashion with officer’s housed forward with the galley and their own head, an engine room midships, and cadet room aft with 12-14 bunks in double tiers. The heads are equipped with a pump-action lever, that can be used to pump sewage into the black water treatment tanks held aboard or into the ocean water. Above decks was the wheelhouse mounted on the forward cabin's coaming; aft of that, the exposed breezeway; and, mounted on the after cabin's coaming, a Zodiac launch as well as a food locker and barbeque. Above the wheelhouse was an open bridge, fitted with a chart table and a gyrocompass repeater. A second gyro repeater was fitted on the quarterdeck. Cougar was equipped with a small navigation radar, with the display located in the wheelhouse.

Operational history

In 1954 she was built for the RCN as YFM 308 (Yard Ferry, Man) and served as a harbour ferry boat. Re-designated as YFP 308 (Yard Ferry, Personnel) in 1960, she was transferred to reserve status due to defence budget cuts. [4] When she was brought back into service in the mid-60s, she was redesignated YAG 308 Cougar and served as a training vessel for regular and reserve forces until she was removed from service in 2007. She was sold in 2011 to private interests.

Related Research Articles

<span class="mw-page-title-main">Royal Canadian Navy</span> Maritime warfare branch of Canadas military

The Royal Canadian Navy is the naval force of Canada. The RCN is one of three environmental commands within the Canadian Armed Forces. As of 2023, the RCN operates 12 frigates, four attack submarines, 12 coastal defence vessels, eight patrol-class training vessels, two offshore patrol vessels, and several auxiliary vessels. The RCN consists of 8,400 Regular Force and 4,100 Primary Reserve sailors, supported by 3,800 civilians. Vice-Admiral Angus Topshee is the commander of the Royal Canadian Navy and chief of the Naval Staff.

HMCS <i>Haida</i> Destroyer of the Royal Canadian Navy

HMCS Haida is a Tribal-class destroyer that served in the Royal Canadian Navy (RCN) from 1943 to 1963, participating in World War II and the Korean War. She was named for the Haida people.

<i>Orca</i>-class patrol vessel Canadian naval training vessels

The Orca-class patrol vessels are a class of eight steel-hulled training and surveillance vessels in service with the Royal Canadian Navy (RCN) at Patrol Craft Training Unit (PCTU) Canadian Forces Base (CFB) Esquimalt. Based on the Australian Pacific-class patrol boat design, all of the Orca vessels were constructed by Victoria Shipyards between November 2004 and November 2008. In addition to carrying the RCN designation of patrol craft training (PCT), the Orca class are not formally commissioned in the RCN and as such do not possess the His Majesty's Canadian Ship (HMCS) prefix.

<span class="mw-page-title-main">CFB Esquimalt</span> Naval base near Victoria, British Columbia, Canada

Canadian Forces Base Esquimalt is Canada's Pacific Coast naval base and home port to Maritime Forces Pacific and Joint Task Force Pacific Headquarters. As of 2018, 4,411 military personnel and 2,762 civilians work at CFB Esquimalt.

<i>Dee Why</i>-class ferry

The Dee Why and Curl Curl, were two identical steam ferries servicing Sydney Harbour's Circular Quay to Manly service. Both commissioned in 1928, they were the largest ferries on Sydney Harbour until the 1938 introduction of the South Steyne.

HMAS <i>Jervis Bay</i> (GT 203)

HMAS Jervis Bay was a roll-on/roll-off passenger and vehicle ferry operated by the Royal Australian Navy (RAN) between 1977 and 1994.

YAG training vessel Series of ten wooden auxiliary vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

YAG 300 vessels were a series of ten wooden boats built between 1954 and 1955 that throughout their service acted as yard ferries, training platforms and test beds for route survey equipment with the Royal Canadian Navy (RCN).

The Royal Canadian Navy uses hull classification symbols to identify the types of its ships, which are similar to the United States Navy's hull classification symbol system. The Royal Navy and some European and Commonwealth navies use a somewhat analogous system of pennant numbers.

HMCS <i>Beacon Hill</i>

HMCS Beacon Hill was a River-class frigate that served in the Royal Canadian Navy (RCN) as an ocean convoy escort during the Second World War. She fought primarily in the Battle of the Atlantic. In 1954 she was converted to a Prestonian-class frigate and served until 1957. She was named for Victoria, British Columbia, but because HMS Victorious was in service with the Royal Navy, the RCN, in an effort to avoid confusion, chose to honour the city by choosing another name associated with it.

Baragoola Australian ferry

MV Baragoola was a ferry formerly operated by the Port Jackson & Manly Steamship Company and its successors on the Manly service.

MV <i>North Head</i> Australian ferry

The MV North Head was a ferry operated by the Port Jackson & Manly Steamship Company and its successors on the Manly service from 1913 until 1985.

HMCS<i> Hunter</i> Military unit

HMCS Hunter is a Canadian Forces Naval Reserve Division (NRD) located in Windsor, Ontario. Dubbed a stone frigate, HMCS Hunter is a land-based naval training establishment crewed by part-time sailors and also serves as a local recruitment centre for the Canadian Forces Naval Reserve. It is one of 24 naval reserve divisions located in major cities across Canada.

CFAV <i>Caribou</i> (YAG 314) One of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

Canadian Forces Auxiliary Vessel (CFAV) Caribou was one of ten wooden YAG-300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Caribou primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt.

CFAV <i>Badger</i> (YAG 319) One of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

Canadian Forces Auxiliary Vessel (CFAV) Badger (YAG-319) was one of ten wooden YAG-300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Badger primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt.

Canadian Forces Auxiliary Vessel (CFAV) Lynx was one of ten wooden YAG-300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Lynx primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt.

CFAV <i>Grizzly</i> (YAG 306) One of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

Canadian Forces Auxiliary Vessel (CFAV) Grizzly was one of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Grizzly primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt. Her name perpetuated the WWII armed yacht HMCS Grizzly was reused for PTC 60 GrizzlyOrca-class Patrol Craft Training (PCT) tender that replaced the YAG 300 vessels as the RCN training tenders in 2008.

Canadian Forces Auxiliary Vessel (CFAV) Otter was one of ten wooden YAG-300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Otter primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt.

References

  1. ↑ "DND/CF : Backgrounder : The YAG 300 Replacement Project". 2007-03-11. Archived from the original on 2007-03-11. Retrieved 2019-12-24.
  2. ↑ "Yard Auxiliary General Info". Yard Auxiliary General. Archived from the original on 17 July 2011. Retrieved 23 December 2019.
  3. ↑ "CFAV Caribou YAG314 - ShipSpotting.com - Ship Photos and Ship Tracker". www.shipspotting.com. Retrieved 2019-12-24.
  4. ↑ "YAG 306 (GRIZZLY) - For Posterity's Sake". www.forposterityssake.ca. Retrieved 2019-12-29.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.