| D | |
|---|---|
 | |
| CNA D.4 on display at Museo Nazionale Scienza e Tecnologia Leonardo da Vinci | |
| Type | 4-cylinder air-cooled horizontally opposed piston engine |
| National origin | Italy |
| Manufacturer | Compagnia Nazionale Aeronautica (CNA) |
The CNA D, often known as the CNA D.4, was a four-cylinder, air-cooled, horizontally opposed engine built in Italy by Compagnia Nazionale Aeronautica (CNA) between 1940 and 1951 to power light aircraft. [1]
Data from Erickson [1]
Data from [1]
Related lists
The Chrysler XIV-2220 was an experimental 2,500 hp, 2,220 cubic inch liquid-cooled inverted-V-16 aircraft engine designed by Chrysler starting in 1940. Although several aircraft designs had considered using it, by the time it was ready for use in 1945 the war was already over. Only a few engines were built during the program, and it retained its 'X' designation the entire time as the XIV-2220, later XI-2220. The IV-2220 is historically important as it was Chrysler's first hemi, a design that would re-appear for many years later and is now a Chrysler trademark.
The Warner Scarab is an American seven-cylinder radial aircraft engine, that was manufactured by the Warner Aircraft Corporation of Detroit, Michigan in 1928 through to the early 1940s. In military service the engine was designated R-420.
The Continental O-190 is a series of engines made by Continental Motors beginning in the 1940s. Of flat-four configuration, the engines produced 75 hp (56 kW) or 85 hp (63 kW) respectively.
The Continental C115, C125 and C140 aircraft engines were made by Continental Motors in the 1940s, all sharing the US military designation O-280. Of flat-6 configuration, the engines produced 115 hp (86 kW) 125 hp (93 kW) or 140 hp (104 kW) respectively.
The Franklin O-335 was an American air-cooled aircraft engine of the 1940s. The engine was of six-cylinder, horizontally-opposed layout and displaced 335 cu in (5.5 L). The power output of later variants was 225 hp (168 kW).
The Franklin O-175 was an American air-cooled aircraft engine of the 1940s. The engine was of horizontally-opposed four-cylinder and displaced 175 cu in (2.9 L). The power output was nominally 80 hp (60 kW). A later variant was designated O-180, despite sharing the same displacement.
The Agusta GA.70 was a four-cylinder, air-cooled, horizontally opposed engine developed in Italy for light aircraft and helicopter use. The GA.70/V featured a bottom sump for vertical applications and was rated at 61 kW (82 hp). It was produced in the 1950s and 1960s.
The Agusta GA.140/V is a 4-cylinder, air-cooled, horizontally opposed engine mounted vertically, developed in Italy for helicopter use and produced from 1962 to 1969.
The Praga Hostivař D was a four-cylinder, air-cooled, horizontally opposed aircraft engine first produced in Czechoslovakia in 1936 but which enjoyed its greatest success after World War II due to the explosion in popularity of sports flying. A version for helicopters was produced post World War II as the Praga DH
The Lycoming O-290 is a dual ignition, four-cylinder, air-cooled, horizontally opposed aircraft engine. It was first run in 1939, and entered production three years later.
The AVIA FL.3 was an Italian two-seat cabin monoplane designed and built by Azionaria Vercellese Industrie Aeronautiche (AVIA) who were later taken over by Lombardi in 1947.
The Lycoming TIO-541 engine is a turbocharged, fuel-injected, horizontally opposed, six-cylinder aircraft engine featuring three cylinders per side, manufactured by Lycoming Engines.
The Continental Tiara series are a family of air-cooled, horizontally opposed aircraft engines. Designed and built by Continental Motors/TCM, the Tiara series were commercially unsuccessful, costing the company millions of dollars.
The AeroConversions Aerovee Engine is a kit-built engine for homebuilt aircraft based on the Volkswagen air-cooled engine.
The Agusta GA.40 was a 2-cylinder, air-cooled, horizontally opposed engine developed in Italy by Agusta for light aircraft use. It was intended for use in motorgliders. The engine was produced in the 1950s and 1960s.
The CNA C.II was a small, air-cooled, two cylinder horizontally opposed aircraft engine designed and built in Italy in the late 1930s.
The Franklin O-225 was an American air-cooled aircraft engine that first ran in the mid-1940s. The engine was of four-cylinder, horizontally-opposed layout and displaced 225 cu in (4 L). The power output was between 75 hp (56 kW) and 125 hp (93 kW) depending on the version.
The Franklin O-425 was an American air-cooled aircraft engine that first ran in the mid-1940s. The engine was of six-cylinder, horizontally-opposed layout and displaced 425 cu in (7 L). The power output was between 240 hp (179 kW) and 285 hp (213 kW) depending on variant. The O-405-13 (6V6-300-D16FT) of 1955 was a vertically mounted, turbocharged and fan cooled version for helicopters.
The Franklin O-265 was an American air-cooled aircraft engine of the early 1940s. The engine was of six-cylinder, horizontally-opposed layout and displaced 265 cu in (4 L). The power output ranged between 120 hp (89 kW) and 140 hp (104 kW) depending on variant. The 6ACG-264 featured a geared propeller drive.
The Renault 6P, also called the Renault Bengali, was a series of air-cooled 6-cylinder inverted in-line aero engines designed and built in France from the late 1920s, which produced from 130 kW (180 hp) to 200 kW (270 hp).
