CVVTCS

Last updated

Continuous Variable Valve Timing Control System (CVVTCS) is an automobile variable valve timing technology developed by Nissan. It is also used in a twin CVTC configuration on engines like the Nissan Juke's MR16DDT engine. CVVTCS is the successor to Nissan's earlier valve timing implementation NVCS. [1] [2]

Contents

Engines with CVVTCS

VQ35HR engine with CVTCS (intake) and eVTC (exhaust) NISSAN VQ35HR - CVTC and eVTC.jpg
VQ35HR engine with CVTCS (intake) and eVTC (exhaust)

See also

Related Research Articles

<span class="mw-page-title-main">VTEC</span> Automobile variable valve timing technology

VTEC is a system developed by Honda to improve the volumetric efficiency of a four-stroke internal combustion engine, resulting in higher performance at high RPM, and lower fuel consumption at low RPM. The VTEC system uses two camshaft profiles and hydraulically selects between profiles. It was invented by Honda engineer Ikuo Kajitani. It is distinctly different from standard VVT systems which change only the valve timings and do not change the camshaft profile or valve lift in any way.

<span class="mw-page-title-main">Variable valve timing</span> Process of altering the timing of a valve lift event

Variable valve timing (VVT) is the process of altering the timing of a valve lift event in an internal combustion engine, and is often used to improve performance, fuel economy or emissions. It is increasingly being used in combination with variable valve lift systems. There are many ways in which this can be achieved, ranging from mechanical devices to electro-hydraulic and camless systems. Increasingly strict emissions regulations are causing many automotive manufacturers to use VVT systems.

<span class="mw-page-title-main">VVT-i</span> Automobile variable valve timing technology

VVT-i, or Variable Valve Timing with intelligence, is an automobile variable valve timing technology developed by Toyota. It was introduced in 1995 with the 2JZ-GE engine found in the JZS155 Toyota Crown and Crown Majesta.

<span class="mw-page-title-main">VANOS</span> BMW variable valve timing system

VANOS is a variable valve timing system used by BMW on various automotive petrol engines since 1992. The name is an abbreviation of the German words for variable camshaft timing.

<span class="mw-page-title-main">Nissan VVL engine</span> Reciprocating internal combustion engine

Nissan Ecology Oriented Variable Valve Lift and Timing is an automobile variable valve timing technology developed by Nissan. VVL varies the duration, and lift of valves by using hydraulic pressure switch between two different sets of camshaft lobes. VVT varies the valve timing throughout the RPM range. Together they function similarly to Honda's VTEC system.

<span class="mw-page-title-main">MIVEC</span> Automobile variable valve timing technology

MIVEC (Mitsubishi Innovative Valve timing Electronic Control system) is the brand name of a variable valve timing (VVT) engine technology developed by Mitsubishi Motors. MIVEC, as with other similar systems, varies the timing of the intake and exhaust camshafts which increases the power and torque output over a broad engine speed range while also being able to help spool a turbocharger more quickly and accurately.

The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.4 and 2.5 litres. Confusingly, the Ecotec name was also applied to both the Buick V6 Engine when used in Holden Vehicles, as well as the final DOHC derivatives of the previous GM Family II engine; the architecture was substantially re-engineered for this new Ecotec application produced since 2000. This engine family replaced the GM Family II engine, the GM 122 engine, the Saab H engine, and the Quad 4 engine. It is manufactured in multiple locations, to include Spring Hill Manufacturing, in Spring Hill, Tennessee, with engine blocks and cylinder heads cast at Saginaw Metal Casting Operations in Saginaw, Michigan.

<span class="mw-page-title-main">Nissan VK engine</span> Reciprocating internal combustion engine

The VK engine is a V8 piston engine from Nissan. It is an aluminum DOHC 4-valve design.

<span class="mw-page-title-main">Nissan VQ engine</span> Reciprocating internal combustion engine

The VQ is a family of V6 automobile petrol engines developed by Nissan and produced in displacements varying from 2.0 L to 4.0 L. Designed to replace the VG series, the all-aluminium 4-valve per cylinder DOHC design debuted with Nissan's EGI/ECCS sequential multi-point fuel injection (MPFI) system. Changes from the VG engine include switching to a timing chain from a timing belt, and relocating the water pump from the outside of the engine to inside the timing cover where the pump is driven by the timing chain. Later versions featured various improvements, such as variable valve timing, and NEO-Di designated VQ engines replace MPFI with direct fuel injection.

<span class="mw-page-title-main">Nissan RB engine</span> Reciprocating internal combustion engine

The RB engine is an oversquare 2.0–3.0 L straight-6 four-stroke gasoline engine from Nissan, originally produced from 1985 to 2004. The RB followed the 1983 VG-series V6 engines to offer a full, modern range in both straight or V layouts.

<span class="mw-page-title-main">Nissan VG engine</span> Reciprocating internal combustion engine

The VG engine is a family of V6 engines designed and produced by Nissan between 1983 and 2004.

<span class="mw-page-title-main">Nissan QG engine</span> Reciprocating internal combustion engine

The QG engine is a 1.3 L (1,295 cc), 1.5 L (1,497 cc), 1.6 L (1,597 cc) and 1.8 L (1,769 cc) straight-4 piston engine from Nissan. It is a lean-burn aluminum DOHC 4-valve design with variable valve timing and optional NEO Di direct injection.

<span class="mw-page-title-main">Honda K engine</span> Reciprocating internal combustion engine

The Honda K-series engine is a line of four-cylinder four-stroke car engine introduced in 2001. The K-series engines are equipped with DOHC valvetrains and use roller rockers on the cylinder head to reduce friction. The engines use a coil-on-plug, distributorless ignition system with a coil for each spark plug. This system forgoes the use of a conventional distributor-based ignition timing system in favor of a computer-controlled system that allows the ECU to control ignition timings based on various sensor inputs. The cylinders have cast iron sleeves similar to the B- and F-series engines, as opposed to the FRM cylinders found in the H- and newer F-series engines found only in the Honda S2000.

<span class="mw-page-title-main">Nissan MR engine</span> Kind of engine made by Nissan

The Renault-Nissan MR engine family consists of straight-four 16-valve all-aluminium and water cooled automobile engines with variable valve timing co-developed by Renault and Nissan. Renault calls it the M engine. Other noteworthy features of this engine family include acoustically equal runner lengths and a tumble control valve for the intake manifold, a "silent" timing chain, mirror finished crankshaft and camshaft journals, and offset cylinder placement in an attempt for increased efficiency.

Nissan Variable Timing control or Nissan Valve Timing Control System is an automobile variable valve timing technology developed by Nissan. N-VTC was first introduced in 1987 on the VG30DE and VG20DET engine.

<span class="mw-page-title-main">Nissan HR engine</span> Reciprocating internal combustion engine

The HR is a family of straight-3 12-valve and straight-4 16-valve automobile engines with continuously variable valve timing, involving development by Nissan and/or Renault, and also Mercedes-Benz in the case of the H5Ht/M282. The designation of H engine is used by Renault, and M28x by Mercedes-Benz, to classify the family. There are three basic specifications of engine involving variations in engine architecture, or all-new architecture, with 72.2 mm (2.84 in), 75.5 mm (2.97 in) and 78 mm (3.07 in) bore diameter.

<span class="mw-page-title-main">Variable Valve Event and Lift</span> Automobile variable valve timing technology

Nissan Variable Valve Event and Lift is an automobile variable valve timing technology developed by Nissan.

<span class="mw-page-title-main">Nissan VR engine</span> Reciprocating internal combustion engine

The VR is a series of twin-turbo DOHC V6 automobile engines from Nissan with displacements of 3.0 and 3.8 L. An evolution of the widely successful VQ series, it also draws on developments from the VRH, JGTC, and Nissan R390 GT1 Le Mans racing engines.

Variable valve lift (VVL) is an automotive piston engine technology which varies the height a valve opens in order to improve performance, fuel economy or emissions. There are two main types of VVL: discrete, which employs fixed valve lift amounts, and continuous, which is able to vary the amount of lift. Continuous valve lift systems typically allow for the elimination of the throttle valve.

References

  1. Turpen, Aaron (June 1, 2014). "Nissan pioneered electronic variable valve timing". TorqueNews. Retrieved July 29, 2023.
  2. "Nissan Continuous Valve Timing Control Systems (CVTCS)". Automotive Tech Info. August 2013. Retrieved July 29, 2023.