C localization functions

Last updated

In computing, C localization functions are a group of functions in the C programming language implementing basic localization routines. [1] [2] The functions are used in multilingual programs to adapt to the specific locale. In particular, the way of displaying of numbers and currency can be modified. These settings affect the behaviour of input/output functions in the C Standard Library. [3]

Contents

Overview of functions

C localization functions and types are defined in locale.h (clocale header in C++). [4] [5]

FunctionDescription
setlocale sets and gets the current C locale
localeconv returns numeric and monetary formatting details of the current locale

Criticism

C standard localization functions are criticized because the localization state is stored globally. This means that in a given program all operations involving a locale can use only one locale at a time. As a result, it is very difficult to implement programs that use more than one locale. [6]

The functions alter the behavior of printf/scanf/strtod which are often used to write saved data to a file or to other programs. The result is that a saved file in one locale will not be readable in another locale, or not be readable at all due to assumptions such as "numbers end at comma characters". Most large-scale software forces the locale to "C" (or another fixed value) to work around these problems.

Example

#include<stdio.h>#include<stdlib.h>#include<locale.h>intmain(void){/* Locale is set to "C" before this. This call sets it       to the "current locale" by reading environment variables: */setlocale(LC_ALL,"");conststructlconv*constcurrentlocale=localeconv();printf("In the current locale, the default currency symbol is: %s\n",currentlocale->currency_symbol);returnEXIT_SUCCESS;}

See also

Related Research Articles

ANSI C, ISO C, and Standard C are successive standards for the C programming language published by the American National Standards Institute (ANSI) and ISO/IEC JTC 1/SC 22/WG 14 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Historically, the names referred specifically to the original and best-supported version of the standard. Software developers writing in C are encouraged to conform to the standards, as doing so helps portability between compilers.

<span class="mw-page-title-main">C (programming language)</span> General-purpose programming language

C is a general-purpose computer programming language. It was created in the 1970s by Dennis Ritchie, and remains very widely used and influential. By design, C's features cleanly reflect the capabilities of the targeted CPUs. It has found lasting use in operating systems, device drivers, protocol stacks, though decreasingly for application software. C is commonly used on computer architectures that range from the largest supercomputers to the smallest microcontrollers and embedded systems.

In computing, a segmentation fault or access violation is a fault, or failure condition, raised by hardware with memory protection, notifying an operating system (OS) the software has attempted to access a restricted area of memory. On standard x86 computers, this is a form of general protection fault. The operating system kernel will, in response, usually perform some corrective action, generally passing the fault on to the offending process by sending the process a signal. Processes can in some cases install a custom signal handler, allowing them to recover on their own, but otherwise the OS default signal handler is used, generally causing abnormal termination of the process, and sometimes a core dump.

<span class="mw-page-title-main">ANSI escape code</span> Method used for display options on video text terminals

ANSI escape sequences are a standard for in-band signaling to control cursor location, color, font styling, and other options on video text terminals and terminal emulators. Certain sequences of bytes, most starting with an ASCII escape character and a bracket character, are embedded into text. The terminal interprets these sequences as commands, rather than text to display verbatim.

The C preprocessor is the macro preprocessor for the C, Objective-C and C++ computer programming languages. The preprocessor provides the ability for the inclusion of header files, macro expansions, conditional compilation, and line control.

The C programming language provides many standard library functions for file input and output. These functions make up the bulk of the C standard library header <stdio.h>. The functionality descends from a "portable I/O package" written by Mike Lesk at Bell Labs in the early 1970s, and officially became part of the Unix operating system in Version 7.

The C standard library or libc is the standard library for the C programming language, as specified in the ISO C standard. Starting from the original ANSI C standard, it was developed at the same time as the C library POSIX specification, which is a superset of it. Since ANSI C was adopted by the International Organization for Standardization, the C standard library is also called the ISO C library.

errno.h is a header file in the standard library of the C programming language. It defines macros for reporting and retrieving error conditions using the symbol errno.

The printf format string is a control parameter used by a class of functions in the input/output libraries of C and many other programming languages. The string is written in a simple template language: characters are usually copied literally into the function's output, but format specifiers, which start with a % character, indicate the location and method to translate a piece of data to characters.

<span class="mw-page-title-main">C99</span> C programming language standard, 1999 revision

C99 is an informal name for ISO/IEC 9899:1999, a past version of the C programming language standard. It extends the previous version (C90) with new features for the language and the standard library, and helps implementations make better use of available computer hardware, such as IEEE 754-1985 floating-point arithmetic, and compiler technology. The C11 version of the C programming language standard, published in 2011, replaces C99.

The One Definition Rule (ODR) is an important rule of the C++ programming language that prescribes that classes/structs and non-inline functions cannot have more than one definition in the entire program and template and types cannot have more than one definition by translation unit. It is defined in the ISO C++ Standard 2003, at section 3.2.

In the C programming language, data types constitute the semantics and characteristics of storage of data elements. They are expressed in the language syntax in form of declarations for memory locations or variables. Data types also determine the types of operations or methods of processing of data elements.

sizeof is a unary operator in the programming languages C and C++. It generates the storage size of an expression or a data type, measured in the number of char-sized units. Consequently, the construct sizeof (char) is guaranteed to be 1. The actual number of bits of type char is specified by the preprocessor macro CHAR_BIT, defined in the standard include file limits.h. On most modern computing platforms this is eight bits. The result of sizeof has an unsigned integer type that is usually denoted by size_t.

The C date and time functions are a group of functions in the standard library of the C programming language implementing date and time manipulation operations. They provide support for time acquisition, conversion between date formats, and formatted output to strings.

In programming languages, particularly the compiled ones like C, C++, and D, linkage describes how names can or can not refer to the same entity throughout the whole program or one single translation unit.

Apache C++ Standard Library project is a set of classes and functions, which are written in the core language.

C11 is an informal name for ISO/IEC 9899:2011, a past standard for the C programming language. It replaced C99 and has been superseded by C17. C11 mainly standardizes features already supported by common contemporary compilers, and includes a detailed memory model to better support multiple threads of execution. Due to delayed availability of conforming C99 implementations, C11 makes certain features optional, to make it easier to comply with the core language standard.

<span class="mw-page-title-main">Rename (computing)</span>

In computing, rename refers to the altering of a name of a file. This can be done manually by using a shell command such as ren or mv, or by using batch renaming software that can automate the renaming process.

printk is a C function from the Linux kernel interface that prints messages to the kernel log. It accepts a string parameter called the format string, which specifies a method for rendering an arbitrary number of varied data type parameter(s) into a string. The string is then printed to the kernel log.

qsort is a C standard library function that implements a polymorphic sorting algorithm for arrays of arbitrary objects according to a user-provided comparison function. It is named after the "quicker sort" algorithm, which was originally used to implement it in the Unix C library, although the C standard does not require it to implement quicksort.

References

  1. ↑ ISO/IEC 9899:1999 specification (PDF). p. 204, § 7.11 Localization.
  2. ↑ Prata, Stephen (2004). C primer plus. Sams Publishing. Appendix B, Section V: The Standard ANSI C Library with C99 Additions. ISBN   0-672-32696-5.
  3. ↑ "ISO/IEC 9899:201x" (PDF). 12 April 2011. p. 181. Archived from the original (PDF) on 29 March 2018.
  4. ↑ "locale.h". utas.edu.au. infosys. Retrieved 14 September 2011.
  5. ↑ "openbsd/src". GitHub. Retrieved 9 April 2018.
  6. ↑ "The Standard C Locale and the Standard C++ Locales". Rogue Wave Software, Inc. 1996.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.