Caldecotte Miniature Railway

Last updated

Caldecotte Miniature Railway
Commercial operations
NameCaldecotte Miniature Railway
Built byMilton Keynes Model Engineering Society
Original gauge7+14 in (184 mm)5 in (127 mm)3+12 in (89 mm)
Preserved operations
StationsOne, 'Caldecotte'.
Length860 yards (786 m)
Commercial history
Opened2005

Caldecotte Miniature Railway (CMR) is a 3.5, 5 and 7.25 inch miniature railway run by the Milton Keynes Model Engineering Society (MKMES) located in Milton Keynes, Buckinghamshire. It is one of the few miniature railways in the UK which offers rides for passengers who are wheelchair users, with a specially built coach.

Contents

The railway runs every Sunday between the start of April and the end of October. Steam is often used to provide rides. [1]

History

Opened in 2005 by the MKMES, a small 'out and back' track was laid, which raised funds for the railway to construct their permanent raised level, dual gauge 3.5 / 5 inch track which was then subsequently used as the railways main track for providing rides. Construction started a few years later on a ground level dual gauge 5 / 7.25 inch track, which was completed in 2012, with locomotive Hagrid completing the first circuit on 25 March, before the railway was officially opened by the then mayor of Milton Keynes, Catriona Morris, on 1 April, with Gas fired steam locomotive 'Nutty' hauling the first passenger train. The opening of the 7.25 track allowed the society's larger locomotives, which had been in store for 5 years, to be used on passenger trains once again.

The railway

The 7.25 railway is an oval which is 840 feet in length (making a ride 1680 feet). The station, which is accessed via a crossing, features a turntable, sidings and two platforms which trains can arrive or depart from. Immediately leaving the station, the main yard can be seen on the right, which has multiple steaming bays and sidings, as well as the main engine sheds. Another notable feature of the railway is the Blue 'Truss' bridge which spans a drainage gap for the field. The bridge was constructed to carry the raised level track but was later widened to allow the ground level trains to use it too.

Locomotives used

[2]

Trains are often hauled by a variety of visiting members locos, with the 'home' locomotives being Hagrid and Katie, which are both petrol powered, Matilda, a battery electric engine, and steam locomotives Sylvia and Pollyanna, both being Romulus design engines.

Locomotive nameLocomotive typeDesign name
HagridPetrolFreelance design
KatiePetrolFreelance design
SylviaSteamRomulus
PollyannaSteamRomulus
MatildaBattery electricFreelance design

Regular events

The railway holds a number of regular events throughout the year, notable events being their traction engine rally and charity day, both being held in the summer months. The railway also holds Halloween trains at the end of October and Santa trains in mid- December. [3]

Related Research Articles

<span class="mw-page-title-main">Ravenglass and Eskdale Railway</span> Heritage railway in Cumbria, England

The Ravenglass and Eskdale Railway is a 15 in minimum gauge heritage railway in Cumbria, England. The 7-mile (11.3 km) line runs from Ravenglass to Dalegarth Station near Boot in the valley of Eskdale, in the Lake District. At Ravenglass the line ends at Ravenglass railway station on the Cumbrian Coast Line.

<span class="mw-page-title-main">Romney, Hythe and Dymchurch Railway</span> Light railway in Kent, England

The Romney, Hythe and Dymchurch Railway (RH&DR) is a 15 in gauge light railway in Kent, England, operating steam and internal combustion locomotives. The 13+12-mile (21.7 km) line runs from the Cinque Port of Hythe via Dymchurch, St. Mary's Bay, New Romney and Romney Sands to Dungeness, close to the Dungeness nuclear power stations and Dungeness Lighthouse. The line is double track north of New Romney and single track south.

<span class="mw-page-title-main">BR Standard Class 9F</span> Class of 251 two-cylinder 2-10-0 locomotives

The British Railways Standard Class 9F2-10-0 is a class of steam locomotive designed for British Railways by Robert Riddles. The Class 9F was the last in a series of standardised locomotive classes designed for British Railways during the 1950s, and was intended for use on fast, heavy freight trains over long distances. It was one of the most powerful steam locomotive types ever built for British Railways, and successfully performed its intended duties. The 9F class was given the nickname of 'Spaceship', due to its size and shape.

<span class="mw-page-title-main">Swanage Railway</span> Heritage railway in Dorset, England

The Swanage Railway is a railway branch line from near Wareham, Dorset to Swanage, Dorset, England, opened in 1885 and now operated as a heritage railway.

<span class="mw-page-title-main">Bala Lake Railway</span> Heritage railway line in Gwynedd, Wales

The Bala Lake Railway is a narrow-gauge railway along the southern shore of Bala Lake in Gwynedd, North Wales. The line, which is 4+12 miles (7.2 km) long, is built on a section of the former standard-gauge Ruabon–Barmouth GWR route that closed in 1965. Another section of the former permanent way is used by the Llangollen Railway. The Bala Lake Railway, which runs on 600 mm -gauge preserved rolling stock, is a member of the Great Little Trains of Wales.

<span class="mw-page-title-main">Model engineering</span>

Model engineering is the pursuit of constructing proportionally-scaled miniature working representations of full-sized machines. It is a branch of metalworking with a strong emphasis on artisanry, as opposed to mass production. While now mainly a hobby, in the past it also had commercial and industrial purpose. The term 'model engineering' was in use by 1888. In the United States, the term 'home shop machinist' is often used instead, although arguably the scope of this term is broader.

A gravity railroad or gravity railway is a railroad on a slope that allows cars carrying minerals or passengers to coast down the slope by the force of gravity alone. The speed of the cars is controlled by a braking mechanism on one or more cars on the train. The cars are then hauled back up the slope using animal power, a locomotive or a stationary engine and a cable, a chain or one or more wide, flat iron bands. A much later example in California used 4 ft 8+12 instandard gauge steam engines to pull gravity cars back to the summit of Mt. Tamalpais.

<span class="mw-page-title-main">Live steam</span> Steam-powered models and toys

Live steam is steam under pressure, obtained by heating water in a boiler. The steam may be used to operate stationary or moving equipment.

<span class="mw-page-title-main">GNR Stirling 4-2-2</span> British steam locomotive

The Great Northern Railway (GNR) No. 1 class Stirling Single is a class of steam locomotive designed for express passenger work. Designed by Patrick Stirling, they are characterised by a single pair of large driving wheels which led to the nickname "eight-footer". Originally the locomotive was designed to haul up to 26 passenger carriages at an average speed of 47 miles per hour (76 km/h). They could reach speeds of up to 85 mph.

<span class="mw-page-title-main">Backyard railroad</span>

A backyard railroad is a privately owned, outdoor railroad, most often in miniature, but large enough for one or several persons to ride on. The rail gauge can be anything from 2+12 in to 7+12 in or more. Smaller backyard or outdoor railroads that cannot be ridden are called garden railroads. Some backyard railroads use full-size rolling stock, such as the former 3 ft narrow gauge Grizzly Flats Railroad owned by railfan and Disney animator Ward Kimball.

<span class="mw-page-title-main">Redwood Valley Railway</span> Miniature railway in Tilden Regional Park, California, US

The Redwood Valley Railway is a 15 in gauge miniature railway in Tilden Regional Park near Berkeley, California.

William Jones (1884–1968), a seasoned veteran of the steam era who established the Wildcat Railroad in Los Gatos, California, was born the son of a teamster in the town of Ben Lomond, California.

<span class="mw-page-title-main">Ridable miniature railway</span> Ultra-narrow-gauge railway on which people can ride

A ridable miniature railway is a large scale, usually ground-level railway that hauls passengers using locomotives that are often models of full-sized railway locomotives.

<span class="mw-page-title-main">Great Whipsnade Railway</span>

The Great Whipsnade Railway, also known as The Jumbo Express, is an English, 2 ft 6 in narrow gauge heritage railway that operates within ZSL Whipsnade Zoo in Bedfordshire, England.

<span class="mw-page-title-main">Eaton Hall Railway</span> Estate railway in Cheshire, England

The Eaton Hall Railway was an early 15 in gauge minimum gauge estate railway built in 1896 at Eaton Hall in Cheshire. The line, which connected the Grosvenor estate with sidings at Balderton on the GWR Shrewsbury to Chester Line about 3 miles (4.8 km) away, opened in 1896. It was built for the Duke of Westminster by Sir Arthur Percival Heywood, who had pioneered the use of 15 in gauge with his Duffield Bank Railway at his house at Duffield, Derbyshire in 1874.

<span class="mw-page-title-main">Lakeside Miniature Railway</span>

The 15 in gauge, single track Lakeside Miniature Railway runs along the seaward side of the Marine Lake in Southport, England.

The Sydney Live Steam Locomotive Society was formed in 1948 and built a miniature railway along a drainage channel behind houses on Anthony Road, West Ryde, Sydney, Australia. The site has been transformed by the addition of fill from excavation work during widening of the local railway line and the society has grown and now operates a miniature railway on the site with a 400m long elevated track of 212 inch, 312 inch and 5 inch gauge, and two 300m long ground level 5 inch railways.

<span class="mw-page-title-main">Barbados Railway</span>

The Barbados Railway was a 38.6-kilometre (24.0 mi)-long narrow-gauge railway on Barbados with a gauge of initially 1,067 mm and later 762 mm. It had 98 bridges, very tight radii and a steep incline. It was used from 1883 to 1937, after it had gone several times through financial difficulties.

Wythall miniature railway is a dual-gauge miniature railway in the grounds of The Transport Museum, Wythall in England. It is operated and maintained by Elmdon Model Engineering Society (EMES)

<span class="mw-page-title-main">Miniature Railway Company</span>

The Miniature Railway Company on Broadway in Manhattan, New York, operated their ridable miniature railways at four World Expositions around 1900 and delivered them to many parks throughout the world.

References

  1. "Caldecotte Miniature Railway". Archived from the original on 27 August 2017. Retrieved 13 September 2016.
  2. "Caldecotte Miniature Railway" . Retrieved 13 September 2016.[ permanent dead link ]
  3. "Caldecotte Miniature Railway" . Retrieved 13 September 2016.[ permanent dead link ]

52°00′38″N0°42′31″W / 52.0105°N 0.7087°W / 52.0105; -0.7087