Mortier de tranchee de circonstance Cellerier | |
---|---|
Type | Infantry mortar |
Place of origin | France |
Service history | |
In service | 1914-1918 |
Used by | France |
Wars | World War I |
Production history | |
Designer | Captain Cellerier |
Specifications | |
Mass | 12 kg (26 lb) |
Shell | 1.8 kg (3 lb 15 oz) |
Caliber | 65 mm (2.6 in) |
Elevation | +45° |
Effective firing range | 250–300 m (270–330 yd) [1] |
The Mortier de tranchee de circonstance Cellerier or Cellerier Mortar was an early French light infantry mortar of World War I. The name roughly translates to (Cellerier Improvised Trench Mortar) in English.
The majority of military planners before the First World War were wedded to the concept of fighting an offensive war of rapid maneuver which before mechanization meant a focus on cavalry and light horse artillery firing shrapnel shells at formations of troops in the open. The problem facing the combatants was that their light field guns were designed for direct fire and only had limited angles of elevation and weren't capable of providing the high-angle indirect fire needed to deal with enemy troops in dug-in positions. [2]
The problem for the French Army was they lacked light, portable, simple, and inexpensive firepower that could be brought with them to provide high-angle indirect fire against an entrenched enemy. Unlike the Germans the French lacked portable mortars like the Granatenwerfer 16, 7.58 cm Minenwerfer or 17 cm mittlerer Minenwerfer for the first half of the war. Early in the war, the French scoured their arms depots and museums and the closest equivalent they had to Germany's light mortars were bronze Mortier de 15 cm mle 1838s. They experimented with crossbows, catapults, and slingshots to propel hand grenades with limited success. [3]
Faced with heavy and effective German mortar fire in the Argonne sector French Artillery Captain Cellerier developed an improvised light trench mortar in November 1914 that utilized cheap and available materials. The base of the mortar was made from a wooden beam with a +45° notch cut out of it and the smoothbore barrel was made from discarded shell casings from the German 7.7 cm FK 96 n.A. field gun. The shell casing was modified by drilling a hole in the base for a pyrotechnic time fuze and the barrel was fastened to the base with a metal bracket which extended through the base and was bolted to the front. Photos of surviving mortars look like an iron pipe could also be used for the barrel instead of shell casings. An iron plate with a handle was attached to the front of the base to carry the mortar and two small spikes at the bottom of the plate anchored the base. [1]
To load the mortar a fuze was placed in the base of the barrel and then a propellant charge was inserted in the muzzle. Then a 65 mm projectile from the Canon de 65 M mle 1906 mountain gun modified with a tail-cone with four sheet metal fins that was placed in the muzzle and the fuze was lit which ignited the propellant charge. The range could be set by varying the size of the propellant charge and by placing shims beneath the base to change the angle of fire. Often groups of mortars were fired together to provide a preparatory barrage before crossing no man's land. These barrages helped mitigate the small size and inaccuracy of the projectiles. [3]
The ignition source would often be a lit cigarette. [4] They were sometime called Taupia mortars, after taupe, the French term for the animal, the mole. [5]
A mortar is today usually a simple, lightweight, man-portable, muzzle-loaded cannon, consisting of a smooth-bore metal tube fixed to a base plate with a lightweight bipod mount and a sight. Mortars are typically used as indirect fire weapons for close fire support with a variety of ammunition. Historically mortars were heavy siege artillery. Mortars launch explosive shells in high-arching ballistic trajectories.
Minenwerfer is the German name for a class of short range mine shell launching mortars used extensively during the First World War by the Imperial German Army. The weapons were intended to be used by engineers to clear obstacles, including bunkers and barbed wire, that longer range artillery would not be able to target accurately.
The Stokes mortar was a British trench mortar designed by Sir Wilfred Stokes KBE that was issued to the British and U.S. armies, as well as the Portuguese Expeditionary Corps, during the latter half of the First World War. The 3-inch trench mortar is a smooth-bore, muzzle-loading weapon for high angles of fire. Although it is called a 3-inch mortar, its bore is actually 3.2 inches or 81 mm.
The 2 inch medium trench mortar, also known as the 2-inch howitzer, and nicknamed the "toffee apple" or "plum pudding" mortar, was a British smooth bore muzzle loading (SBML) medium trench mortar in use in World War I from mid-1915 to mid-1917. The designation "2-inch" refers to the mortar barrel, into which only the 22 in (560 mm) bomb shaft but not the bomb itself was inserted; the spherical bomb itself was actually 9 in (230 mm) in diameter and weighed 42 lb (19 kg), hence this weapon is more comparable to a standard mortar of approximately 5–6 in (130–150 mm) bore.
The ML 9.45 inch heavy trench mortar, nicknamed the "Flying Pig", was a large calibre mortar of World War I and the standard British heavy mortar from the autumn of 1916. It was a modification of an original French design, the Mortier de 240 mm developed by Batignolles Company of Paris and introduced in 1915. Britain manufactured the modified version under licence.
The 240 mm trench mortar, or Mortier de 240 mm, was a large calibre mortar of World War I. An original French design, it was developed by Batignolles Company of Paris and introduced in 1915.
The Mortier de 58 mm type 2 or Mortier de 58 mm T N°2, also known as the Crapouillot or "little toad" from its appearance, was the standard French medium trench mortar of World War I.
The 25 cm schwerer Minenwerfer, often abbreviated as 25 cm sMW, was a heavy mine shell launching trench mortar developed for the Imperial German Army in the first decade of the 20th century.
The Mortier de 220 mm Tir Rapide modèle 1915/1916 Schneider or 220 mm TR mle 1915/1916 was a French howitzer designed and produced during the First World War. A number were still on hand during the Second World War and served in Belgian, French and German service.
The Mortier de 270 mm modèle 1889 sur affût G was a heavy mortar originally employed as coastal artillery and later converted to the siege artillery role. Mle 1889 mortars were used in both the First World War and Second World Wars.
The Mortier de 270 mm modèle 1885 was a French heavy mortar employed as siege artillery during the First World War.
Albrecht mortars or Albrecht Schwerer Minenwerfers were a series of wooden heavy mortars used by the Imperial German Army during the First World War.
The Mortier de 370 modèle 1914 Filloux (MLE) was a siege mortar. It was designed before the First World War and was used during the war.
The Mortier de 75 modèle 1915 Schneider was a French trench mortar designed and built by Schneider that saw action with the French and Belgian Army during the First World War.
The 24 cm schwere Flügelminenwerfer IKO or 24 cm sFIMW IKO was a heavy mortar used by the Imperial German Army during the First World War.
The Mortier de 58 T N°1 sometimes referred to as Lance Torpilles was an early French medium trench mortar of World War I. Built in small numbers it was a transitional type in the development of later French mortars.
The 24 cm schwere FlügelMinenWerfer Albrecht, or 24 cm sFIMW 17 Albrecht, was a heavy mortar used by the Imperial German Army during the First World War.
The Mortier de 58 T N°1 bis sometimes referred to as Lance Torpilles was an early French medium trench mortar. It was used by both the French Army and Italian Army during the First World War.
The 24 cm schwerer LadungsWerfer Ehrhardt shortened to 24 cm sLW Ehrhardt,('24 cm heavy charge thrower Ehrhardt' in English) was a heavy mortar used by the Imperial German Army during the First World War.