Chrysler A platform

Last updated

The Chrysler A platform was the basis for smaller rear wheel drive cars in the 1960s. These cars are sometimes referred to as A-body cars.

Contents

Cars using the A platform in various markets around the world include:

This list is not complete: A-platform vehicles not included on this list were sold in some countries until 1981. [1]

Wheelbases:

1989

The "A" name was reused again for the mid-size Chrysler LeBaron, Dodge Spirit and Plymouth Acclaim sedans, though this was changed to AA when Chrysler moved to two-letter names for 1990. The "AA" cars lasted until 1995 when replaced by the more modern, but less popular, JA "Cloud Cars" in the same year.

Cars that used the front wheel drive AA platform were:

See also

Related Research Articles

Dodge is an American brand of automobiles and a division of Stellantis North America, based in Auburn Hills, Michigan. Dodge vehicles have historically included performance cars, and for much of its existence Dodge was Chrysler's mid-priced brand above Plymouth.

<span class="mw-page-title-main">Muscle car</span> High-performance car

A muscle car is an American-made two-door sports coupe with a powerful engine, generally designed for high-performance driving.

<span class="mw-page-title-main">Plymouth (automobile)</span> Defunct American automobile brand

Plymouth was a brand of automobiles produced by Chrysler Corporation and its successor DaimlerChrysler. The brand was launched in 1928 to compete in what was then described as the "low-priced" market segment that was dominated by Chevrolet and Ford. It became a high-volume seller for the automaker until the late 1990s. Plymouth cars were marketed primarily in the United States. The brand was withdrawn from the marketplace in 2001. The Plymouth models that were produced up until then were either discontinued or rebranded as Chrysler or Dodge.

Stellantis Canada is the wholly owned subsidiary of Stellantis through its North American division operating in Canada. Incorporated in 1925, the Chrysler Corporation of Canada acquired a Maxwell-Chalmers plant in Windsor, Ontario that had been used to manufacture some Chrysler models in the previous year. Initially called Chrysler Canada, Ltd, the name of the company changed to DaimlerChrysler Canada Inc. following the merger of the two parent automotive conglomerates. In August 2007, the company was renamed Chrysler Canada Incorporated when Cerberus Capital Management purchased 80.1% of its parent company Chrysler.

<span class="mw-page-title-main">Dodge Lancer</span> Cars marketed by Dodge division of Chrysler

The Dodge Lancer is an automobile that was marketed in three unrelated versions by Dodge during the 1950s, 1960s, and 1980s. The first version debuted as a hardtop version of the full-sized 1955 Dodge, and was produced in that form until 1959. The second version revived the nameplate in 1961 for a Chrysler A platform-based compact that was marketed for two model years and replaced by the Dodge Dart. The third version returned the Lancer nameplate in 1985 for a front-wheel drive mid-sized Chrysler H platform model that was in production until 1988 after which it was replaced by the Dodge Spirit.

<span class="mw-page-title-main">Plymouth Valiant</span> Motor vehicle

The Plymouth Valiant is an automobile which was marketed by the Plymouth division of the Chrysler Corporation in the United States from the model years of 1960 through 1976. It was created to give the company an entry in the compact car market emerging in the late 1950s. The Valiant was also built and marketed, without the Plymouth brand, worldwide in countries including Argentina, Australia, Brazil, Canada, Finland, Mexico, New Zealand, South Africa, Sweden and Switzerland, as well as other countries in South America and Western Europe. It became well known for its excellent durability and reliability, and was one of Chrysler's best-selling automobiles during the 1960s and 1970s, helping to keep the company solvent during an economic downturn.

<span class="mw-page-title-main">Plymouth Duster</span> Motor vehicle

The original Plymouth Duster is a semi-fastback two-door coupe version of the compact-sized Plymouth Valiant automobile that was marketed by Plymouth in the U.S. from 1970 to 1976 model years.

<span class="mw-page-title-main">Dodge Dart</span> Motor vehicle

The Dodge Dart is a line of passenger cars produced by Dodge from the 1959 to 1976 model years in North America, with production extended to later years in various other markets.

<span class="mw-page-title-main">Chrysler K platform</span> Motor vehicle platform

The K-car platform was a key automotive design platform introduced by Chrysler Corporation for the 1981 model year, featuring a transverse engine, front-wheel drive, independent front and semi-independent rear suspension configuration—a stark departure from the company's previous reliance on solid axle, rear-drive unibody configurations during the 1970s. Derived from Chrysler's L-cars, the Plymouth Horizon and Dodge Omni, the platform was developed just as the company faltered in the market, at first underpinning a modest range of compact/mid-size sedans and wagons—and eventually underpinning nearly fifty different models, including all-wheel drive variants—and playing a vital role in the company's subsequent resurgence.

The B platform or B-body was the name of two of Chrysler's midsize passenger car platforms – at first rear-wheel drive, from 1962 through 1979; and the later, unrelated front-wheel drive platform, used by the Eagle Premier / Dodge Monaco, from 1988 through 1992.

<span class="mw-page-title-main">Chrysler B engine</span> Reciprocating internal combustion engine

The Chrysler B and RB engines are a series of big-block V8 gasoline engines introduced in 1958 to replace the Chrysler FirePower engines. The B and RB engines are often referred to as "wedge" engines because they use wedge-shaped combustion chambers; this differentiates them from Chrysler's 426 Hemi big block engines that are typically referred to as "Hemi" or "426 Hemi" due to their hemispherical shaped combustion chambers. The corporation had been seeking a smaller and lighter replacement for its FirePower engines, in part because new styling dictates meant moving the engine forward in the chassis which negatively affected weight distribution.

<span class="mw-page-title-main">Chrysler Slant-6 engine</span> Reciprocating internal combustion engine

The Slant-Six is the popular name for a Chrysler inline-6 internal combustion engine with an overhead valve reverse-flow cylinder head and cylinder bank inclined at a 30-degree angle from vertical. Introduced in 1959 for the 1960 models, it was known within Chrysler as the G-engine. It was a clean-sheet design that began production in 1959 at 170 cubic inches (2.8 L) and ended in 2000 at 225 cubic inches (3.7 L). It was a direct replacement for the flathead Chrysler straight six that the company started business with in 1925 until the old design was discontinued in the 1960s.

<span class="mw-page-title-main">Car tailfin</span> Aspect of automotive design

The tailfin era of automobile styling encompassed the 1950s and 1960s, peaking between 1955 and 1961. It was a style that spread worldwide, as car designers picked up styling trends from the US automobile industry, where it was regarded as the "golden age" of American auto design and American exceptionalism.

<span class="mw-page-title-main">Dodge Super Bee</span> Motor vehicle

The Dodge Super Bee is a mid-sized muscle car marketed by Dodge, that was produced for the 1968 through 1971 model years.

Saint Louis Assembly was a Chrysler automobile factory in Fenton, Missouri. The "South" plant opened in 1959, while the "North" portion opened in 1966. The Saint Louis Factory was built to accommodate Chrysler's new Chrysler B platform allowing the company to build subcompact vehicles. Saint Louis North was the home of minivan production from 1987 through 1995, when it was converted to build the Dodge Ram pickup truck. Minivan production was switched to the South plant, which had been shut down since 1991, in 1995 and continued there through the 2007 model year.

Toluca Car Assembly is a 220-acre (89 ha) Chrysler automobile factory in Toluca, State of Mexico, Mexico. It opened in 1968. Toluca Stamping is located nearby.

<span class="mw-page-title-main">Dodge Polara</span> Motor vehicle

The Dodge Polara is an automobile introduced in the United States for the 1960 model year as Dodge's top-of-the-line full-size car. After the introduction of the Dodge Custom 880 in 1962, the Polara nameplate designated a step below the full-sized best-trimmed Dodge model; the Polara that year had been downsized to what was in effect intermediate, or mid-size status. In its various forms, the Polara name was used by Dodge until 1973, when its position in Dodge's line-up was replaced by the Dodge Monaco.

<span class="mw-page-title-main">Dodge Phoenix</span> Motor vehicle

The Dodge Phoenix is an automobile which was produced by Chrysler Australia from 1960 to 1972.

This is a list of automobiles produced for the general public in the North American market. They are listed in chronological order from when each model began its model year. If a model did not have continuous production, it is listed again on the model year production resumed. Concept cars and submodels are not listed unless they are themselves notable.

Los Angeles (Maywood) Assembly was a Chrysler assembly plant located in the City of Commerce, near Maywood in southeastern Los Angeles County, California. It was an assembly location where vehicles were shipped by railroad in "knock-down kits" from Detroit, where they were locally assembled, combined with locally sourced parts. Vehicles assembled at Maywood were largely sold in California and the Western United States. It operated from 1932 until 1971, at 5800 Eastern Avenue and Slauson Boulevard.

References

  1. "Chrysler Australia History". www.uniquecarsandparts.com.au. Retrieved 2023-01-17.