The first-generation Barracuda was based on the Chrysler A-body and was offered from 1964 until 1966. A two-door hardtop (no B-pillar) fastback design, it shared a great majority of parts and bodywork with the Plymouth Valiant, except for the distinctive wraparound rear glass.
The second-generation Barracuda, though still Valiant-based, was heavily redesigned. Built from 1967 through 1969, it was available as a two-door in fastback, notchback, and convertible versions.
The third generation, offered from 1970 until 1974, was based on the Chrysler E-body, exclusive to it, and the slightly larger Dodge Challenger. A completely new design, the two-door Barracuda was available in hardtop and convertible body styles.
During the development of the Barracuda, one of the worst-kept secrets was Ford's plan to introduce a new sporty compact car based on the inexpensive Falcon chassis and running gear (which was eventually released as the Mustang in mid-model year 1964); the extent of the other changes was not known.[3] Chrysler stylist Irv Ritchie sketched a fastback version of the compact Valiant.[3] Budgets were limited due to research and development of the Chrysler Turbine Car, but the company's executives wanted to have an entry in this emerging and potentially lucrative sporty-compact car market segment, beginning by siphoning off some of the Chevrolet's Corvair Monza's sales.[3] Plymouth's executives had wanted to name the new model Panda,[4] an idea unpopular with its designers. In the end, John Samsen's suggestion of Barracuda prevailed.[4]
Based on Chrysler's A-body,[5] the Barracuda debuted in fastback form on April 1, 1964. The new model used the Valiant's 106in (2,692mm) wheelbase and the Valiant hood, headlamp bezels, windshield, vent windows, quarter panels, doors, A-pillar, and bumpers; the trunk and some of the glass was new. Using the same hybrid design approach as Ford did turning its Falcon into the Mustang significantly reduced Plymouth's development and tooling cost and time for the new model. The greatest effort was put into creating its distinguishing 14.4sqft (1.34m2) rear window,[1] a collaboration between Pittsburgh Plate Glass (PPG) and Chrysler designers that created the largest ever installed on a standard production car to that time.[6]
Powertrains were identical to the Valiant's, including two versions of Chrysler's slant-6six-cylinder engine. The standard-equipment engine had a displacement of 170cuin (2.8L) and an output of 101bhp (75kW); the 225cuin (3.7L) option raised the power output to 145bhp (108kW).[citation needed]
The highest-power option for 1964 was Chrysler's all-new 273cuin (4.5L)LA V8. A compact and relatively light engine equipped with a two-barrel carburetor, it produced 180bhp (130kW).[7] The Barracuda sold for a base price of US$2,512 ($25,000 today).
The 1964 model year was the first for the Barracuda and also the last year for push-button control of the optional Torqueflite automatic transmission. This year also marked the first use of the smaller "TorqueFlite 6" (A904) transmission behind a V8.
In the marketplace, the Barracuda was obviously a fastback version of the Valiant that had a frugal family transportation image. The sales brochure for the first Barracudas pitched it as a car "for people of all ages and interests."[3] The more sporty Mustang was marketed with abundant advertising to young professionals and with its youthful image proved widely successful following its mid-1964 introduction.[3] This became known as the "pony car" niche of modestly appointed compact-sized sedans and convertibles, which came with standard 6-cylinder engines and basic interiors, but could be outfitted with powerful V8s and "custom" appointments and luxury features. The success of the Mustang has long obscured the fact that the Barracuda actually predated Ford's introduction by two weeks.[8] The abbreviated sales season for the 1964 Barracuda totaled 23,443 units compared to the 126,538 Mustangs sold during the same time.[3]
1965
1965 Barracuda Formula S
In 1965, the 225 slant-6 became the base engine for the U.S. market, though the 170cuin (2.8L) remained the base engine in Canada.
New options were introduced for the Barracuda as the competition among pony cars intensified. The 273 engine was made available as an upgraded Commando version with a four-barrel carburetor, 10.5:1 compression, and a more aggressive camshaft, still with solid tappets. These and other upgrades increased the engine's output to 235bhp (175kW).
A new Formula 'S' package included the Commando V8 engine, suspension upgrades, larger wheels and tires, special emblems, and a tachometer. Disc brakes and factory-installed air conditioning became available after the start of the 1965 model year.
1966
1966 Plymouth Barracuda
For the 1966 model year the Barracuda received new taillamps, new front sheet metal, and a new instrument panel. The latter had room for oil pressure and tachometer gauges on models so equipped. The 1966 front sheet metal which, except for the grille, was shared with the Valiant, gave a more rectilinear contour to the fenders. Deluxe models featured fender-top turn signal indicators with a stylized fin motif. The bumpers were larger, and the grille featured a strong grid theme. A center console was optional for the first time.
Although the first Barracudas were heavily based on the contemporary Valiants, Plymouth wanted them perceived as distinct models. Consequently, the "Valiant" chrome script that appeared on the 1964+1⁄2 model's trunk lid was phased out at the end of the 1965 model year in the U.S. market, and the large stylized "V" trim above the deck lid was changed to a unique Barracuda fish logo for 1966,[4] though in markets such as Canada and South Africa, where Valiant was a marque in its own right, the car remained badged as Valiant Barracuda until the A-body Barracuda was discontinued.
The second-generation Barracuda was redesigned with model-specific sheet metal, yet still shared many components with the Valiant. It rode on a 108in (2,743mm) wheelbase A-body and was available as a convertible,and a notchback coupe, in addition to the fastback design.
The new Barracuda was chiefly the work of John E. Herlitz and John Samsen,[4] with Coke-bottle side contours and heavily revised front and rear ends. Design changes included wider wheel openings, curved side glass, and S-curved roof pillars on the hardtop.
The roofline on the fastback coupe was more streamlined, more steeply raked, and with a much smaller flush rear window in place of the distinctive massive wraparound in the original model. Also, the overall use of chrome trim was more restrained.
During this time the first U.S. Federal auto safety standards were phased in, and Chrysler's response a requirement for side-marker lights distinguishes each model year of the second-generation Barracuda:
1968: round side marker lamps without reflectors, mostly white tail lamps with backup lights in the tail lamp housing.
1969: little changes on the front grille, rectangular side marker reflectors without lamps, and the backup lamps were moved back to the rear valance by the license plate.
As the pony-car class became established and competition increased, Plymouth began to revise the Barracuda's engine options.
1967 Barracuda convertible
In 1967, while the 225cuin (3.7L) slant-6 was still the base engine, the V8 options ranged from the two- and four-barrel versions of the 273cuin (4.5L) to a seldom-ordered 383cuin (6.3L)"B" big-block, rated at 280bhp (209kW), the latter available only with the Formula S package.
1968 Barracuda
1968
In 1968, the 273 was replaced by the 318cuin (5.2L) LA engine as the smallest V8 available, and the new 340cuin (5.6L) LA four-barrel was released. The 383 Super Commando engine was upgraded with the intake manifold, camshaft, and cylinder heads from the Road Runner and Super Bee, but the more restrictive exhaust manifolds specific to the A-body cars limited its output to 300bhp (224kW).[9]
Also in 1968, Chrysler made approximately fifty fastback Barracudas equipped with the 426cuin (7.0L)Hemi for Super Stock drag racing.[8] These cars were assembled by Hurst Performance and featured items such as lightweight Chemcor side glass, fiberglass front fenders, hood scoop, lightweight seats, sound deadener, and other street features such as rear seats omitted. An included sticker indicated that the car was not for use on public roads; it could run the quarter-mile in the mid-tens in 1968.[8]
For the South African export market, a 190bhp (142kW) high-performance version of the 225 slant-6 called Charger Power was offered with 9.3:1 compression, two-barrel carburetor, more aggressive camshaft, and low-restriction exhaust system.[citation needed] A handful of Savage GTs were also built from the second-generation Barracuda.[citation needed]
1969
In 1969, Plymouth placed an increased emphasis on performance. A new option was the Mod Top, a vinyl roof covering with a floral motif, available in 1969 and 1970. Plymouth sold it as a package with seat and door panel inserts done in the same pattern.[10]
The 1969 version of the 383 engine was upgraded to increase power output to 330bhp (246kW), and a new trim package called 'Cuda was released. The 'Cuda, based on the Formula S option, was available with either the 340, 383 and, new for 1969, the 440 Super Commando V8.[citation needed]
The redesign for the 1970 Barracuda removed all its previous commonality with the Valiant. The original fastback design was deleted from the line and the Barracuda now consisted of coupe and convertible models. The all-new model, styled by John E. Herlitz, was built on a shorter, wider version of Chrysler's existing B platform, called the E-body.[12] Though sharing its platform with the newly launched Dodge Challenger, no exterior sheet-metal interchanged between the sibling cars. The Challenger, at 110 inches (2.79m), had a wheelbase that was 2 inches (5.1cm) longer, and a body 5 inches (12.7cm) longer than the Barracuda's.
The E-body Barracuda was now "able to shake the stigma of 'economy car'."[13] Three versions were offered for 1970 and 1971: the base Barracuda (BH), the luxury oriented Gran Coupe (BP), and the sport model 'Cuda (BS).[14]
Beginning mid-year 1970, and ending with the 1971 model, there also was the Barracuda Coupe (A93), a low-end model with the 198cuin (3.2L) Slant Six as a base engine, lower-grade interior, and (like other Coupe series Chrysler offered that year) had fixed quarter glass instead of roll-down rear passenger windows.[15] The high-performance models were marketed as 'Cuda deriving from the 1969 option. The E-body's engine bay was larger than that of the previous A-body, facilitating the release of Chrysler's 426cuin (7.0L)Hemi for the regular retail market.[citation needed]
1970 Plymouth Hemi 'Cuda, raced by the Chrysler France works team in 1970-1973
For 1970 and 1971, the Barracuda and Barracuda Gran Coupe had two slant I6 engines available — a new 198cuin (3.2L) version and the previous 225 — as well as four different V8s: the 318 CID, the 383cuin (6.3L), the 383 with a two-barrel carburetor and single exhaust, and the 383 with a four-barrel carburetor and dual exhaust 330hp (246kW) SAE gross.
The Cuda had the 383 335hp (250kW) SAE gross (same as Dodge's 383 Magnum) as the standard engine. Options included the 340cuin (5.6L), 290hp (220kW) AAR "Six Barrel", with triple 2-barrel carburetors, a 440cuin (7.2L) four-barrel 375hp (280kW) Super Commando, the 440 Six Barrel with triple 2-barrel carburetors with a gross rating of 390hp (290kW), and the 425hp (317kW)426cuin (7.0L) Hemi.[16] The 440- and Hemi-equipped cars received upgraded suspension components and structural reinforcements to help transfer the power to the road.[citation needed]
1970 Plymouth 'Cuda 440+6 in High Impact Paint (HIP) color "In-Violet"FE5 Red 1971 Plymouth Barracuda convertible beside a historic bridge in Savage, MD.
Other Barracuda options included decal sets, hood modifications, and some unusual "high impact" colors such as "Lime Light", "Bahama Yellow", "Tor Red", "Lemon Twist", "Curious Yellow", "Vitamin C", "In-Violet", "Sassy Grass" and "Moulin Rouge".[17]
Swede Savage and Dan Gurney raced identical factory-sponsored AAR (All American Racers) 'Cudas in the 1970 Trans-Am Series. The cars qualified for three pole positions but did not win any Trans-Am races; the highest finish was second at Road America.[18] Four 1970 Hemi 'Cudas were also successfully raced by Chrysler France, from 1970 until 1973.[19] The works team director Henrí Chemin piloted the first car, and then sold it on to friend and privateer J. F. Mas who went on to race it for another two years. This Hemi 'Cuda won four French Group 1 class championships, three on track and one in hill climbing.[20]
The Barracuda was changed slightly for 1971, with a new grille and taillights, seat, and trim differences. This would be the only year that the Barracuda would have four headlights (which the Challenger had for all five years of their concurrent run), and also the only year of the fender "gills" on the 'Cuda model. Only 1970 'Cuda models received a "hockey stick" stripe with an engine call out within it, where as 1971 'Cudas were the only year that had the full side "Billboard" decal with the engine call out inside of the billboard decal.[citation needed]
The 1971 Barracuda engine options would remain the same as that of the 1970 model, except that the 340 6-Bbl was gone, and the four-barrel carbureted 440 V8 engine was no longer on the options list, but could be had via special order and perhaps a dozen cars were built with it installed; otherwise, the 440-powered Barracudas had a six-barrel carburetor setup instead.
In 1971 the big-block power options offered to the customer were:
275hp (205kW) SAE Gross in the 383-2V
300hp (224kW) SAE Gross in the 383-4V
385hp (287kW) SAE Gross in the 440-6V
425hp (317kW) SAE Gross in the 426-8V
In 1970 and 1971 only, the shaker hood (option code N96), elastomeric (rubber) colored bumpers, and the Spicer-built Dana 60 rear axle were available. The shaker hood was available with 340, 383, 440 four-barrel, 440 six-barrel, and 426 Hemi engines. The elastomeric (rubber) colored bumpers were available either as a front-only option, option code A21, or as a front and rear combination, option code A22. The heavy-duty (and heavy) Dana 60, with a 9.75in (248mm) ring gear, was standard equipment with manual transmissions and 440 six-barrel and 426 Hemi engines, and was optional on those with the automatic transmission.[21][22] 1971 Barracudas with floor shifted transmissions received a new column key release, where as 1970 models had a backdrive linkage for key removal.
With a new grille and single headlights (very similar to the 1970 model) and four circular taillights for 1972, the Barracuda would remain basically unchanged through 1974, with new bodyside stripes, and minor changes to the bumpers to conform with federal impact standards being the only significant variations. In 1973 the shape of the pedals was changed from a trapezoid shape with a fine horizontal pattern that was original to the shape of the 1970, where as 1973 and later had larger rectangle shaped clutch and brake pedals with thicker horizontal grooves that would remain similar to most all Chrysler products through the 1980s. There was also a corresponding gas pedal that matched the aforemtioned brake and clutch style variations. With this change of pedal shape the brake and clutch supporting members were forged differently, and the pads were not interchangeable. 1972 was also the last year for the basket-weave pattern in the seats, where as the next two years, seats had a different cost saving coachman grain pattern vinyl with different bucket seat backs. [citation needed] Big block engines (383, 440, & 426 Hemi), , heavy-duty suspensions, Dana 60 rear axle, large/wide tires mounted on 15in ×7in (380mm ×180mm) wheels were no longer offered. Additionally; the convertible model was dropped; though a few late build 1971 convertibles were built with 1972 grills and back end panels and provided to Paramount Studios for TV and movie work; being seen on Mannix, The Brady Bunch and other shows. Convenience and comfort items such as power seats, power windows, and upgraded interior (leather seats and plush carpeting) options were dropped, though heavy-duty air conditioning and a sunroof could still be ordered. For 1972 only, three engine choices were offered: a 225 six, the 318 (base engine for both 'Cuda and Barracuda), and a revised 340 detuned to meet emission standards. In addition, all three were tuned to run on low/no-lead gas and were power rated on the NET (installed) method. Three transmissions were offered: a 3-speed manual, the Torqueflite automatic, and the Hurst shifter equipped four-speed. For 1973 federally mandated safety bumpers were added front and rear, and the 225 six was dropped, with the 318 and 340 V8s being the only engine choices. For late production 1973 cars, and for 1974 a slightly more powerful 360 V8 (245 E bodyhp) replaced the 340. Since 1970; optional was a four-speed manual transmission (equipped with a Hurst shifter) mated to a performance ratio (3.55 to 1) rear axle for the 340 and 360 engines, though as many as three cars (in both 1973 and 1974) were built with the 318 engine and Hurst 4-speed thru special orders or factory errors.
As with other American vehicles of the time,[citation needed] there was a progressive decrease in the Barracuda's performance. To meet increasingly stringent safety and exhaust emission regulations, big-block engine options were discontinued. The remaining engines were detuned year by year to reduce exhaust emissions, which also reduced their power output. There was also an increase in weight as bumpers became larger and, starting in 1970, E-body doors were equipped with heavy steel side-impact protection beams. Higher fuel prices following the 1973 oil crisis and performance-car insurance surcharges deterred many buyers as the interest in high-performance cars waned. Sales of pony cars were on the decline.[23] Sales had dropped dramatically after 1970, and while 1973 showed a sales uptick, Barracuda production ended April 1, 1974, ten years to the day after it had begun.
Engines
Engine choices by Chrysler for the 1970-73 Barracuda included the following:
N: 383cuin (6.3L)B V8 Magnum (4-barrel carburetor, dual exhaust): 1970 335bhp (340PS; 250kW) at 5,000 rpm SAE gross and 425lb⋅ft (576N⋅m) at 3,200 rpm of torque,[26] 1971 300bhp (224kW) SAE gross, 1971 250bhp (186kW) SAE net
U: 440cuin (7.2L)RB V8 Magnum 4-barrel Holley AVS-4737S carburetor: 1970 375bhp (380PS; 280kW) at 4,600 rpm and 480lb⋅ft (651N⋅m) at 3,200 rpm of torque SAE gross,[27] (1971 370bhp (276kW) SAE gross, 305bhp (227kW) SAE net only in Satellite GTX and Plymouth Sport Fury GT)
V: 440cuin (7.2L)RB V8 Six-Pack 3X2-barrel Holley R-4382A/R-4375A/R-4383A carburetors: 1970 390bhp (395PS; 291kW) at 4,700 rpm and 490lb⋅ft (664N⋅m) at 3,200 rpm of torqueSAE gross,[28] 1971 385bhp (390PS; 287kW) SAE gross, 1971 330bhp (335PS; 246kW)SAE net
R: 426cuin (7.0L)Hemi V8 2X4-barrel Carter AFB 4742S/AFB4745Scarburetors: 1970-71 425bhp (431PS; 317kW)SAE gross at 5,000 rpm and 490lbf⋅ft (664N⋅m) at 4,000 rpm of torque,[29] 1971 Costing an extra US$1,228 ($9,000 today) with very few sold.
SAE gross hp ratings were tested with no accessories, no air cleaner, or open headers. In 1971, compression ratios were reduced in performance engines, except the 426 cu in and the high-performance 440 cu in, to accommodate regular gasoline. 1971 was the last year for the 426 Hemi.
Chrysler had plans to continue the 1970 Dodge Challenger T/A for 1971, even publishing advertisements for a 1971 Dodge Challenger T/A. However, no 1971 Dodge Challenger T/A was made. Similarly, no 1971 Plymouth AAR Cuda was made.
A 1975 Barracuda had been planned before the end of the 1970-74 model cycle. Plymouth engineers sculpted two separate concepts out of clay, both featuring a Superbird-inspired aerodynamic body, and eventually reached a consensus upon which an operational concept car could be built. Due to a rapidly changing automotive market due to the energy crisis, the concepts were scrapped and the Barracuda was not put into production for 1975.[31]
Revival attempts
In 2007, Motor Trend magazine reported a rumor that Chrysler was considering reviving the Barracuda in 2009.[32] A new Barracuda would've been badged as a Chrysler, due to the Plymouth brand having been phased out in 2001. However, the Barracuda has not been reintroduced alongside the third generation Dodge Challenger. Rumors of the Barracuda making a comeback were brought up again by Motor Trend in 2012 when reports leaked that the Barracuda would come back in 2014 under the SRT Marque, replacing the Challenger instead of being built alongside it. It was also stated the car would not be of a retro design.[33] Ultimately, the SRT division was re-consolidated under the Dodge banner and the Challenger remained in production without a Barracuda replacement.
After years of silence, an all-new Barracuda, now under the Dodge brand, was shown to FCA dealers along with other future vehicles on August 25, 2015. Based on stretched underpinnings of the rear-drive Alfa Romeo Giulia, it was rumored to be powered by a turbocharged V6 and arrive within the 2019 model year.[34] As of 2024, a new Barracuda model has not materialized.
Collectibility
The Barracuda (particularly the 1970–1974 E-Body cars) is a collectible car today, with high-performance versions and convertibles commanding the highest prices. The small number of Barracudas remaining in existence is the result of low buyer interest (and low production/sales) when the vehicles were new. The remaining cars of any condition are rare, and the outstanding examples fetch high appraisal values today.[35] Original Hemi super stock Barracudas (and similarly configured Dodge Darts) are now prized collector vehicles, with factory (unaltered) cars commanding high prices.[36]
The 1971 Hemi 'Cuda convertible is now considered one of the most valuable collectible muscle cars. Only thirteen were built, seven of which were sold domestically. The most recent public sale was at the June 2014 Mecum auction in Seattle, where a blue-on-blue 4-speed sold for US$3.5 million (plus buyers premium).[37][38] Several replica cars were created to look like Hemi 'Cudas and driven by the title character in the late-1990s police proceduralNash Bridges.[39] None of these replica cars had a Hemi V8 under the hood.[40]
Related Research Articles
A muscle car is an American-made two-door sports coupe with a powerful engine, generally designed for high-performance driving.
Plymouth was a brand of automobiles produced by Chrysler Corporation and its successor DaimlerChrysler. The brand was launched in 1928 to compete in what was then described as the "low-priced" market segment that was dominated by Chevrolet and Ford. It became a high-volume seller for the automaker until the late 1990s. Plymouth cars were marketed primarily in the United States. The brand was withdrawn from the marketplace in 2001. The Plymouth models that were produced up until then were either discontinued or rebranded as Chrysler or Dodge.
The Plymouth Road Runner is a mid-size car with a focus on performance built by Plymouth in the United States between 1968 and 1980. By 1968, some of the original muscle cars were moving away from their roots as relatively cheap, fast cars as they gained features and increased in price. Plymouth developed the Road Runner to market a lower-priced, basic trim model to its upscale GTX.
The Plymouth Valiant is an automobile which was marketed by the Plymouth division of the Chrysler Corporation in the United States from the model years of 1960 through 1976. It was created to give the company an entry in the compact car market emerging in the late 1950s. The Valiant was also built and marketed, without the Plymouth brand, worldwide in countries including Argentina, Australia, Brazil, Canada, Finland, Mexico, New Zealand, South Africa, Sweden and Switzerland, as well as other countries in South America and Western Europe. It became well known for its excellent durability and reliability, and was one of Chrysler's best-selling automobiles during the 1960s and 1970s, helping to keep the company solvent during an economic downturn.
The Dodge Dart is a line of passenger cars produced by Dodge from the 1959 to 1976 model years in North America, with production extended to later years in various other markets.
The Chrysler B and RB engines are a series of big-block V8 gasoline engines introduced in 1958 to replace the Chrysler FirePower engines. The B and RB engines are often referred to as "wedge" engines because they use wedge-shaped combustion chambers; this differentiates them from Chrysler's 426 Hemi big block engines that are typically referred to as "Hemi" or "426 Hemi" due to their hemispherical shaped combustion chambers. The corporation had been seeking a smaller and lighter replacement for its FirePower engines, in part because new styling dictates meant moving the engine forward in the chassis which negatively affected weight distribution.
The LA engine is a family of overhead-valve small-block 90° V-configured gasoline engines built by Chrysler Corporation between 1964 and 2003. Primarily V8s, the line includes a single V6 and V10, both derivations of its Magnum series introduced in 1992. A replacement of the Chrysler A engine, they were factory-installed in passenger vehicles, trucks and vans, commercial vehicles, marine and industrial applications. Their combustion chambers are wedge-shaped, rather than polyspheric, as in the A engine, or hemispheric in the Chrysler Hemi. LA engines have the same 4.46 in (113 mm) bore spacing as the A engines.
The Chrysler A engine is an OHV small-block V8 gasoline engine built by Chrysler from 1956 until 1967. It featured polyspherical combustion chambers, and was offered in displacements from 276.1 cu in (4.5 L) to 325.2 cu in (5.3 L), and in various high-power configurations. It began to be replaced by the wedge-head LA engine in 1964, and is not related to the hemispherical-head Hemi engine of the 1950s or 1960s.
The Slant-Six is the popular name for a Chrysler inline-6 internal combustion engine with an overhead valve reverse-flow cylinder head and cylinder bank inclined at a 30-degree angle from vertical. Introduced in 1959 for the 1960 models, it was known within Chrysler as the G-engine. It was a clean-sheet design that began production in 1959 at 170 cubic inches (2.8 L) and ended in 2000 at 225 cubic inches (3.7 L). It was a direct replacement for the flathead Chrysler straight six that the company started business with in 1925 until the old design was discontinued in the 1960s.
The Chrysler Valiant was a full-size car which was sold by Chrysler Australia between 1962 and 1981. Initially a rebadged locally assembled Plymouth Valiant from the United States, from the second generation launched in 1963, the Valiant was fully manufactured in Australia. It was sold locally but also in New Zealand and South Africa, with smaller numbers also exported to South-East Asia and the United Kingdom.
The Dodge Monaco is an automobile that was marketed by the Dodge division of Chrysler Corporation. Introduced as the flagship of the Dodge product line, the Monaco was introduced for the 1965 model year to replace the Custom 880, then later joined as a sub-model of the Dodge Polara. During its production, the Monaco was offered in several body configurations, including two-door and four-door hardtop sedans, four-door sedans, two-door convertibles, and station wagons.
The Dodge Coronet is an automobile that was marketed by Dodge in seven generations, and shared nameplates with the same bodyshell with varying levels of equipment installed. Introduced as a full-size car in 1949, it was the division's highest trim line and moved to the lowest level starting in 1955 through 1959. The name was reintroduced on intermediate-sized models from the 1965 until 1976 model years. Muscle car versions were available starting in 1965 with the 383 and 426 wedge cu in Chrysler RB engine, followed in 1966 by the powerful 426 cu in Chrysler Hemi. Other performance models included the "Superbee", and featured, the 383 cu in Magnum, among other engine options. The nameplate "coronet" is a type of crown worn by royalty.
The Plymouth Fury is a model of automobile that was produced by Plymouth from 1955 until 1989. It was introduced for the 1956 model year as a sub-series of the Plymouth Belvedere, becoming a separate series one level above the contemporary Belvedere for 1959. The Fury was a full-size car from 1959 until 1961, then a mid-size car from 1962 until 1964, again, a full-size car from 1965 through 1974, and again, a mid-size car from 1975 through 1978. From 1975 until 1977, the Fury was sold alongside the full-size Plymouth Gran Fury. In 1978, the B-body Fury was the largest Plymouth, and by 1979, there was no large Plymouth. This product gap was filled in 1980 with the R-body Gran Fury, followed by the M-body Fury in 1982. Production of the last V8, RWD Plymouth Fury ended at the Kenosha Main assembly plant in Kenosha, WI, on December 23, 1988. Unlike its sibling brand, Dodge, Plymouth would not live to see the resurgence of the large, V8/RWD sedan.
The Dodge Super Bee is a mid-sized muscle car marketed by Dodge, that was produced for the 1968 through 1971 model years.
The Chrysler Hemi engine, known by the trademark Hemi or HEMI, refers to a series of high-performance American overhead valve V8 engines built by Chrysler with hemispherical combustion chambers. Three generations have been produced: the FirePower series from 1951 to 1958; a famed 426 cu in (7.0 L) race and street engine from 1964-1971; and family of advanced Hemis (displacing between 5.7 L 6.4 L from 2003 to the present.
The Plymouth Satellite is a mid-size automobile introduced in the 1965 model year as the top trim model in Plymouth's "B" platform Belvedere line. Available initially in two-door hardtop and convertible models, the Satellite remained the top-of-the-line model until the 1967 model year. A station wagon version was added and a higher "Sport" trim introduced.
The Plymouth GTX is an automobile introduced as the Belvedere GTX in 1967 by the Plymouth division. It was positioned as a mid-sized upscale-trimmed performance muscle car through the 1971 model year.
The Newport was a name used by Chrysler for both a hardtop body designation and also for its lowest priced model between 1961 and 1981. Chrysler first used the Newport name on a 1940 show car, of which five vehicles were produced. From 1950 to 1956, the Newport name was then used to designate any Chrysler model with a hardtop body style. In 1961, Chrysler introduced the Newport as a new, low-priced model, offering large, comfortable two- and four-door Chrysler models that were modestly priced compared with the Chrysler 300, the Chrysler New Yorker and the Imperial. For 1961, the Newport was priced below the Chrysler Windsor in the Windsor's final year.
The Dodge Charger (1966), also known as Dodge Charger (B-body), is a mid-size automobile that was produced by Dodge from 1966 through 1978 model years, and was based on the Chrysler B platform.
The Dodge Challenger is a full-size automobile produced by American automobile manufacturer Dodge. The first use of the Challenger name by Dodge was in 1959 for marketing a "value version" of the full-sized Coronet Silver Challenger.
References
1 2 Mueller, Mike (2009). The Complete Book of Classic Dodge and Plymouth Muscle: Every model from 1960 to 1974. Motorbooks. ISBN978-0-7603-4477-4.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
