The Plymouth XNR is a concept car developed by Chrysler. It was designed by Virgil Exner, and first shown in 1960. Also called the XNR 500, the car is an open roadster with some asymmetric features, and was proposed as a sporty addition to the Plymouth model lineup, and as competition for the Chevrolet Corvette.
Automobile designer Virgil Exner left Studebaker to join Chrysler in 1949.[1] Chrysler's previous designers favored conservative, upright bodystyles, but sales were declining.[2] At Chrysler, one of his first challenges was to wrest final say over design away from the engineering department.[1][3]
The XNR went through several name changes during development. Some early drawings label it the "Falcon".[8]:120 This was also the development name of the car that became the production Valiant, until Ford registered it for their own new compact.[9] Later the car was called the Asymmetrica, and later still renamed "XNR", a disemvoweled, pseudo-acronym of the designer's own last name.[10][11]
The shape of the XNR was influenced by a Studebaker Indianapolis race car that Exner owned, as well as by the later asymmetrical Watson Indy Roadster, and the Jaguar D-Type.[12][13][14]
As originally built, the car reached a speed of 146mph (235km/h) on Chrysler's test track. Exner is said to have personally driven the car on the track at speeds up to 142mph (229km/h).[8][14] Later, after being fitted with a fiberglass nosecone fabricated by Dick Burke and receiving additional engine modifications, the car reached a top speed of 153mph (246km/h).[13]
In May 1960, the XNR appeared on the covers of both Road & Track and Motor Trend magazines, then in May 1961 on the cover of Today's Motor Sports magazine.
The car made its first public appearance at the 1960 New York Auto Show.[15][16][17]
Chrysler did not put the Plymouth XNR into production.[18][2] Exner wanted to buy the car from Chrysler, but was unsuccessful.[19] The XNR was shipped back to Ghia in Italy to prevent it from being destroyed.[20]
After being returned to Ghia, the XNR was purchased by a Swiss buyer, who later sold it to Mohammad Reza Pahlavi, the Shah of Iran.[21] After that it was sold again, this time to Anwar al Mulla, a Kuwaiti car dealer. During Mulla's ownership the XNR appeared in a photo taken in Kuwait in the May 1969 issue of National Geographic.[2] It was sold again in the early 1970s to a man in Lebanon who kept it in underground storage until Karim Edde found the car during the Lebanese Civil War of 1975–1991 and recognized it. Edde acquired the car and kept moving it to various locations to protect it from damage during the fighting. After the war Edde sent the car to RM Restorations in Canada in 2008 for a full restoration.[2]
The restoration was completed in March 2011, after which the car was reintroduced at that year's Amelia Island Concours d'Elegance.[2] In August of the same year the XNR won the Gran Turismo Trophy at the Pebble Beach Concours d'Elegance.[22][23]
On 18 August 2012, the XNR sold for $935,000 at RM Sotheby's Monterey auction.[24][19][12]
Features
Rear three-quarter view
The XNR uses both the chassis and "G-Series" Slant-6 straight-six engine from the Valiant, both of which were new for the 1960 model year.
In Chrysler's Slant-6, the row of cylinders is inclined 30° from vertical. There are two common models of the engine; the LG, with a deck height of 9.06in (230.1mm), and the RG, with a deck height of 10.680in (271.3mm). The LG has a bore and stroke of 3.40in ×3.125in (86.4mm ×79.4mm), and displaces 170cuin (2.8L). The RG has a bore of 3.40in (86mm), and a stroke of either 3.64in (92.5mm) or 4.125in (104.8mm), for displacements of 198cuin (3.2L) and 225cuin (3.7L) respectively. Connecting rod lengths vary from engine to engine. The XNR is fitted with a 170cubicinch LG, which is the only version low enough to fit under the car's hood.[2]
The engine was fitted with Chrysler's Hyper Pak performance package.[25] A 170cubicinch Slant-6 with Hyper Pak typically developed around 148hp (110kW).[26][27] Apart from the Hyper Pak kit, the engine in the XNR is distinguished by being one of just twelve Slant-6s built to "NASCAR" specifications, which included other upgrades.[2][25][19][14] It is thus related to the engines that powered Slant-6 Valiants to the first seven positions in the inaugural Cannonball Compact Car Division NASCAR race held in January 1960 at Daytona.[28][29][30] A power output of 250hp (186kW) is often quoted for the engine in the XNR.[2][14]
The XNR was built on the compact-sized unitary chassis of the Valiant, which was cut down and then had its sills reinforced for use in the roadster.[2] This modified chassis was shipped to Ghia in Italy, who built an armature, or body buck, and then formed the car's body in steel over it.[25][27]
The side elevation of the XNR's body has features that are exaggerated versions of the body language used on the first generation Valiant and second generation Dodge Lancer. The asymmetric aspect of the design consists of an offset hood scoop and long power bump behind it on the driver's side that continues behind the driver as a tall headrest that tapers into a fin.
The XNR seats two, but the passenger's seat is set back and mounted 4in (102mm) lower than the driver's, and has a separate, smaller wind deflector ahead of it on the scuttle that can be folded flat forward out of the way, instead of the curved windscreen in front of the driver.[14][2][17] A rigid steel tonneau cover for over the passenger side effectively converts the car into a single seater.[2][19]
Exner's interested in photography and photographic equipment is reflected in some features of the XNR. The glass covers over the dash gauges mimic camera lenses, and the glove box insert was removable, and could be used as a camera case.[19]
In the front, quad headlamps are mounted in a perforated aluminum grille with a chrome border that serves as a bumper. In the rear is a narrow chrome cruciform bumper, whose main leg stretches across the back and is intersected by another, shorter leg that starts below the main bumper and extends up the trailing edge of the rear fin.
A full-scale replica of the XNR was built by the Gotham Garage company headed by Mark Towle. The build was featured on Netflix Car Masters: Rust to Riches.
The body for the Gotham Garage car was created in fiberglass by Starr Creations in Florida.[33]
The finished replica was donated to the Petersen Automotive Museum in Los Angeles, California[17] A second XNR replica by Gotham Garage was built, and then sold at the start of Season 3.[34]
Asimmetrica by Ghia
Asimmetrica Roadster by Ghia
In October 1961, Ghia presented the Asimmetrica at the Turin Motor Show. It was displayed without naming a manufacturer for the car.[35] The Asimmetrica is described as a more subdued interpretation of the XNR's design language.[35][36]
It is unclear how much input Exner had on the Asimmetrica's design. One possibility is that the shape was drawn by Exner, but that the designer left Chrysler before the car was complete. Another suggestion is that the car was created entirely by Ghia, and was styled by Luigi Segre.[35][2]
The body of the Asimmetrica was fabricated using the same body bucks that Ghia had originally built for the XNR.[35] This car is closer to a production vehicle than its predecessor, with features that were omitted on the XNR, such as door handles, a full windshield, and, although often termed a roadster, a full folding top.[37] The XNR's off-center power bulge and rear fin remained, although the fin was substantially reduced, and one of each pair of headlamps was moved from the grille to a pod faired into the front sides of the front fenders, leaving just two headlamps in the narrower grille opening. The marker lamp recessed into the front lower side of the front wheelarch brow was also moved to a pod below the headlamp.[37]
Like the XNR, the Asimmetrica is built on a Valiant chassis, and is powered by a Slant-6 engine with the Hyper Pak performance package.[35]
It is reported that Ghia hoped to put the car into limited production themselves, but was unable to arrange financing. Some sources also suggest that a run of twenty-five of the cars was planned, but that only one or two were completed.[36][35]
In March 1962, a related hardtop version, called the Coupé St. Régis, was shown alongside the Asimmetrica at the Geneva Auto show.[38]
The Asimmetrica at the Geneva show was sold to French author Georges Simenon following the event.[35] It was later sold by Rob de la Rive Box and Roger Meyer to the Blackhawk Collection, where it underwent an extensive restoration lasting a full year, after which it was shown at the 1990 Pebble Beach Concours d'Elegance. The car was then sold to a collector in the American Pacific Northwest.[39]
An Asimmetrica was sold at RM Sotheby's 2018 Monterey Car Week auction for $335,000 (inclusive of applicable buyer's fee).[35] The chassis number of this car was 1102224086, indicating that it began life as a Valiant V100 four-door sedan with a basic LG engine making 101hp (75.3kW), and was built in 1960 at what was then Chrysler's Hamtramck assembly plant.[36]
Related Research Articles
Plymouth was a brand of automobiles produced by Chrysler Corporation and its successor DaimlerChrysler. The brand was launched in 1928 to compete in what was then described as the "low-priced" market segment that was dominated by Chevrolet and Ford. It became a high-volume seller for the automaker until the late 1990s. Plymouth cars were marketed primarily in the United States. The brand was withdrawn from the marketplace in 2001. The Plymouth models that were produced up to then were either discontinued or rebranded as Chrysler or Dodge.
The Volkswagen Karmann Ghia are a family of three overlapping sporty Volkswagen model series, marketed in 2+2 coupe (1955–1975) and 2+2 convertible (1957–1975) body styles, though German production ended one year before that in Brazil. Internally designated the Type 14 (1955–1975), the Type 34 (1962–1969), and the Type 145 TC, the Karmann Ghia cars combined the floorpans and mechanicals of the Type 1 / Beetle or Type 3 'ponton' models with styling by Italy's Carrozzeria Ghia, and hand-built bodywork by German coachbuilding house Karmann.
The Chrysler New Yorker is an automobile model that was produced by Chrysler from 1940 until 1996, serving for several decades as either the brand's flagship model or as a junior sedan to the Chrysler Imperial, the latter during the years in which the Imperial name was used within the Chrysler lineup rather than as a standalone brand.
The Dodge Lancer is an automobile that was marketed in three unrelated versions by Dodge during the 1950s, 1960s, and 1980s. The first version debuted as a hardtop version of the full-sized 1955 Dodge, and was produced in that form until 1959. The second version revived the nameplate in 1961 for a Chrysler A platform-based compact that was marketed for two model years and replaced by the Dodge Dart. The third version returned the Lancer nameplate in 1985 for a front-wheel drive mid-sized Chrysler H platform model that was in production until 1988 after which it was replaced by the Dodge Spirit.
Virgil Max "Ex" Exner Sr. was an automobile designer for several American automobile companies, most notably Chrysler and Studebaker.
The Plymouth Valiant is an automobile which was marketed by the Plymouth division of the Chrysler Corporation in the United States from the model years of 1960 through 1976. It was created to give the company an entry in the compact car market emerging in the late 1950s. The Valiant was also built and marketed, without the Plymouth brand, worldwide in countries including Argentina, Australia, Brazil, Canada, Finland, Mexico, New Zealand, South Africa, Sweden and Switzerland, as well as other countries in South America and Western Europe. It became well known for its excellent durability and reliability, and was one of Chrysler's best-selling automobiles during the 1960s and 1970s, helping to keep the company solvent during an economic downturn.
The Plymouth Barracuda is a two-door pony car that was manufactured by Chrysler Corporation from 1964 through 1974 model years.
Dodge Dart is a line of automobiles marketed by Dodge from the 1959 to 1976 model years in North America, with production extended to later years in various other markets.
Imperial was the Chrysler Corporation's luxury automobile brand from 1955 to 1975, and again from 1981 to 1983.
Dual-Ghia is a rare, short-lived, automobile make produced in the United States between 1956 and 1958. The idea for a sporty limited production car came from Eugene Casaroll, who controlled specialized vehicle builder Dual-Motors Corporation based in Detroit, Michigan; the name Dual-Ghia is representative of the collaborative efforts between the builder and Carrozzeria Ghia.
Carrozzeria Ghia SpA is an Italian automobile design and coachbuilding firm, established by Giacinto Ghia and Gariglio as "Carrozzeria Ghia & Gariglio". The headquarters are located at Corso Guglielmo Marconi, 4, Turin. The company is currently owned by Ford Motor Company and focused on the European market through Ford's subsidiary in the region.
The Slant-Six is the popular name for a Chrysler inline-6 internal combustion engine with an overhead valve reverse-flow cylinder head and cylinder bank inclined at a 30-degree angle from vertical. Introduced in 1959 for the 1960 models, it was known within Chrysler as the G-engine. It was a clean-sheet design that began production in 1959 at 170 cubic inches (2.8 L) and ended in 2000 at 225 cubic inches (3.7 L). It was a direct replacement for the flathead Chrysler straight six that the company started business with in 1925 until the old design was discontinued in the 1960s.
Three Chrysler Imperial Parade Phaetons were produced in 1952 by Chrysler as ceremonial vehicles. They were styled by Virgil Exner and were in many ways a preview of the new "100 Million Dollar" styling that would debut in 1955 on the newly separate Imperial marque and on other full-size Chrysler Corporation Cars.
The Dodge Matador is a full-sized automobile which was produced for the 1960 model year by Dodge. The Matador was the base model, positioned below the top trim level Dodge Polara that also used the 122-inch (3,099 mm) wheelbase platform of the Chrysler Windsor and Chrysler Newport models.
The Dodge Polara is an automobile introduced in the United States for the 1960 model year as Dodge's top-of-the-line full-size car. After the introduction of the Dodge Custom 880 in 1962, the Polara nameplate designated a step below the full-sized best trimmed Dodge model; the Polara that year had been downsized to what was in effect intermediate, or mid-size status. In its various forms, the Polara name was used by Dodge until 1973, when its position in Dodge's line-up was replaced by the Dodge Monaco.
The Chrysler Falcon is a two-seat roadster concept car commissioned by Chrysler and built by Carrozzeria Ghia for the 1955 model year. The car was never put into production, but some of its features reappeared on later Chrysler designs.
Exner Revival Cars were created by noted automobile designer, Virgil Exner. He produced a series of "Revival Car" concepts for a December 1963 issue of Esquire magazine. His designs included an updated model for four famous American marques: Stutz, Duesenberg, Packard, and Mercer. He later designed updated Bugatti, Pierce-Arrow, and Jordan cars. Little came of these designs, though they became well known as plastic model kits produced by Renwal.
Luigi "Gigi" Segre was an Italian automotive designer noted for his business and engineering acumen during his stewardship and ownership of Carrozzeria Ghia (1953–63), one of an Italy's premier automobile design and coachbuilders.
The Plymouth Suburban is a station wagon produced from 1949 until 1978.
Willem Weertman is an American engineer known for his work as an engineer at Chrysler Corporation, where he was actively involved in the creation of many of the company's most famous engines, including the Slant Six, 2.2 four, and LA V8. He graduated from Yale University with a bachelor of engineering degree in 1947 before joining the Chrysler Institute of Engineering; in 1949 he started work at the Plymouth Assembly Plant before spending 1950–1952 with the Navy in the Korean War. In 1954 Weertman became the first resident engineer for the Plymouth Mound Road V8 engine plant, which started producing A-engines in 1955. In December 1955, Weertman was promoted up to the Engine Design Department of Chrysler's Central Engineering department and assigned a title of Manager - Engine Design. In this capacity he worked on the Chrysler B engine and Slant Six, which would become known for its durability and at the time was considered to have high performance for its size. Valiants powered by this engine took first through seventh place in the first and only NASCAR sanctioned compact-car race.
1 2 Grist, Peter (15 August 2007). Virgil Exner: Visioneer: The official biography of Virgil M. Exner, designer extraordinaire. Veloce Publishing Ltd. ISBN978-1845841188.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
