Collaborative planning, forecasting, and replenishment

Last updated

Collaborative planning, forecasting, and replenishment (CPFR) is an approach to the supply chain process which focuses on joint practices. This is done through cooperative management of inventory through joint visibility and replenishment of products throughout the supply chain. Information shared between suppliers and retailers aids in satisfying customer demands through a system of shared information. This allows for continuous updating of inventory and upcoming requirements, making the end-to-end supply chain process more efficient. [1] Efficiency is created through the decrease expenditures for merchandising, inventory, logistics, and transportation across all trading partners. [2]

Contents

CPFR is a trademark of GS1 US. [3]

Origins

CPFR began as a 1995 initiative co-led by Wal-Mart's Vice President of Supply Chain, Chief Information Officer, Vice President of Application Development, and the Cambridge, Massachusetts software and strategy firm, Benchmarking Partners. The Open Source initiative was originally called CFAR (pronounced See-Far, for Collaborative Forecasting and Replenishment). According to an October 21, 1996 Business Week article entitled Clearing the Cobwebs from the Stockroom, New Internet software may make forecasting a snap, "Benchmarking developed CFAR with funding from Wal-Mart, IBM, SAP, and Manugistics. The latter two are makers of accounting and supply chain management software, respectively. To promote CFAR as a standard, Benchmarking has posted specifications on the Web and briefed more than 250 companies, including Sears, J.C. Penney, and Gillette. About 20 companies are implementing CFAR." [4]

Warner Lambert (now part of Pfizer) served as the first pilot for CFAR. The pilot's results were publicly announced at a CFAR industry session at Harvard University, July 30, 1996 of executives from Wal-Mart's suppliers as well as other retailers and the Uniform Code Council. Benchmarking Partners then presented CFAR to the board of directors of the Voluntary Interindustry Commerce Standards Committee (VICS). VICS established an industry committee to prepare for rolling CFAR out as an international standard. The original committee was co-chaired by the vice president of customer marketing from Nabisco and the vice president of supply chain from Wal-Mart. Based on the suggestion of Procter & Gamble's vice president of supply chain, the standard was renamed CPFR to emphasize the role of planning.

The first publication of the VICS CPFR Voluntary Guidelines came out in 1998. Currently there are committees "to develop business guidelines and roadmaps for various collaborative scenarios, which include upstream suppliers, suppliers of finished goods and retailers, which integrate demand and supply planning and execution. The committee is continuing to improve the existing guidelines, tools and critical first steps that enable the implementation of CPFR." [5] [6] These committees gained experience from pilot studies which have occurred over the past six years. VICS continues to lead much of the research and implementation of CPFR through its guidelines and project investigations.

CPFR model

CPFR was originally presented by VICS in their VICS CPFR Guidelines in 1998 as a nine-step (or data flow) process, [7] starting with the collaborating businesses developing the agreement for collaboration. The nine steps were: [8]

  1. Develop Front End Agreement
  2. Create the Joint Business Plan
  3. Create the Sales Forecast
  4. Identify Exceptions for Sales Forecast
  5. Resolve/Collaborate on Exception Items
  6. Create Order Forecast
  7. Identify Exceptions for Order Forecast
  8. Resolve/Collaborate on Exception Items
  9. Order Generation

The CPFR model presents the aspects in which industries focus. The model provides a basic framework for the flow of information, goods, and services. In the retail industry the “retailer typically fills the buyer role, a manufacturer fills the seller role, and the consumer is the end customer.” [2] [5] The center of the model is represented as the consumer, followed by the middle ring of the retailer, and finally the outside ring being the manufacturer. The consumer drives demand for goods and services while the retailer is the provider of goods and services. The manufacturer supplies the retailer stores with product as demand for product is pulled through the supply chain by the end user, being the consumer. The choice of demand forecasting method influences both supplier selection and planning of order allocation. [9]

See also

Related Research Articles

<span class="mw-page-title-main">Supply chain management</span> Management of the flow of goods and services

In commerce, supply chain management (SCM) deals with a system of procurement, operations management, logistics and marketing channels, through which raw materials can be developed into finished products and delivered to their end customers. A more narrow definition of supply chain management is the "design, planning, execution, control, and monitoring of supply chain activities with the objective of creating net value, building a competitive infrastructure, leveraging worldwide logistics, synchronising supply with demand and measuring performance globally". This can include the movement and storage of raw materials, work-in-process inventory, finished goods, and end to end order fulfilment from the point of origin to the point of consumption. Interconnected, interrelated or interlinked networks, channels and node businesses combine in the provision of products and services required by end customers in a supply chain.

Vendor-managed inventory (VMI) is an inventory management practice in which a supplier of goods, usually the manufacturer, is responsible for optimizing the inventory held by a distributor.

Demand management is a planning methodology used to forecast, plan for and manage the demand for products and services. This can be at macro-levels as in economics and at micro-levels within individual organizations. For example, at macro-levels, a government may influence interest rates to regulate financial demand. At the micro-level, a cellular service provider may provide free night and weekend use to reduce demand during peak hours.

<span class="mw-page-title-main">GS1</span> Organization for barcode standards

GS1 is a not-for-profit, international organization developing and maintaining its own standards for barcodes and the corresponding issue company prefixes. The best known of these standards is the barcode, a symbol printed on products that can be scanned electronically.

<span class="mw-page-title-main">Bullwhip effect</span> Form of distribution marketing

The bullwhip effect is a supply chain phenomenon where orders to suppliers tend to have a larger variability than sales to buyers, which results in an amplified demand variability upstream. In part, this results in increasing swings in inventory in response to shifts in consumer demand as one moves further up the supply chain. The concept first appeared in Jay Forrester's Industrial Dynamics (1961) and thus it is also known as the Forrester effect. It has been described as "the observed propensity for material orders to be more variable than demand signals and for this variability to increase the further upstream a company is in a supply chain". Research at Stanford University helped incorporate the concept into supply chain vernacular using a story about Volvo. Suffering a glut in green cars, sales and marketing developed a program to sell the excess inventory. While successful in generating the desired market pull, manufacturing did not know about the promotional plans. Instead, they read the increase in sales as an indication of growing demand for green cars and ramped up production.

<span class="mw-page-title-main">Demand-chain management</span> Management of relationships between suppliers &customers to deliver best value to customer

Demand-chain management (DCM) is the management of relationships between suppliers and customers to deliver the best value to the customer at the least cost to the demand chain as a whole. Demand-chain management is similar to supply-chain management but with special regard to the customers.

Walmarting or Walmartization is a neologism referring to U.S. discount department store Walmart with three meanings. The first use is similar to the concept of globalization and is used pejoratively by critics and neutrally by businesses seeking to emulate Walmart's success. The second, pejorative, use refers to the homogenization of the retail sector because of those practices. The third, neutral, use refers to the act of actually shopping at Walmart.

<span class="mw-page-title-main">Import</span> Good brought into a jurisdiction

An importer is the receiving country in an export from the sending country. Importation and exportation are the defining financial transactions of international trade. Import is part of the International Trade which involves buying and receiving of goods or services produced in another country. The seller of such goods and services is called an exporter, while the foreign buyer is known as an importer.

Replenishment may refer to:

The Supply Chain Operations Reference (SCOR) model is a process reference model originally developed and endorsed by the Supply Chain Council, now a part of ASCM, as the cross-industry, standard diagnostic tool for supply chain management. The SCOR model describes the business activities associated with satisfying a customer's demand, which include plan, source, make, deliver, return, and enable. Use of the model includes analyzing the current state of a company's processes and goals, quantifying operational performance, and comparing company performance to benchmark data. SCOR has developed a set of metrics for supply chain performance, and ASCM members have formed industry groups to collect best practices information that companies can use to elevate their supply chain models.

<span class="mw-page-title-main">Vendor</span> Supplier of goods or services

In a supply chain, a vendor, supplier, provider or a seller, is an enterprise that contributes goods or services. Generally, a supply chain vendor manufactures inventory/stock items and sells them to the next link in the chain. Today, these terms refer to a supplier of any goods or service. In property sales, the vendor is the name given to the seller of the property.

Customer demand planning (CDP) is a business-planning process that enables sales teams to develop demand forecasts as input to service-planning processes, production, inventory planning and revenue planning.

Integrated business planning (IBP) is a process for translating desired business outcomes into financial and operational resource requirements, with the overarching objective of optimizing profit, cash flow and risk. The business outcomes, on which IBP processes focus, can be expressed in terms of the achievement of the following types of targets:

Fashion merchandising can be defined as the planning and promotion of sales by presenting a product to the right market at the proper time, by carrying out organized, skillful advertising, using attractive displays, etc. Merchandising, within fashion retail, refers specifically to the stock planning, management, and control process. Fashion Merchandising is a job that is done world- wide. This position requires well-developed quantitative skills, and natural ability to discover trends, meaning relationships and interrelationships among standard sales and stock figures. In the fashion industry, there are two different merchandising teams: the visual merchandising team, and the fashion merchandising team.

Supply-chain sustainability is the management of environmental, social and economic impacts and the encouragement of good governance practices, throughout the lifecycles of goods and services. There is a growing need for integrating sustainable choices into supply-chain management. An increasing concern for sustainability is transforming how companies approach business. Whether motivated by their customers, corporate values or business opportunity, traditional priorities such as quality, efficiency and cost regularly compete for attention with concerns such as working conditions and environmental impact. A sustainable supply chain seizes value chain opportunities and offers significant competitive advantages for early adopters and process innovators.

Channel coordination aims at improving supply chain performance by aligning the plans and the objectives of individual enterprises. It usually focuses on inventory management and ordering decisions in distributed inter-company settings. Channel coordination models may involve multi-echelon inventory theory, multiple decision makers, asymmetric information, as well as recent paradigms of manufacturing, such as mass customization, short product life-cycles, outsourcing and delayed differentiation. The theoretical foundations of the coordination are based chiefly on the contract theory. The problem of channel coordination was first modeled and analyzed by Anantasubramania Kumar in 1992.

Produce traceability makes it possible to track produce from its point of origin to a retail location where it is purchased by consumers.

The Global Food Safety Initiative (GFSI) is a private organization that works as a "coalition of action" from the Consumer Goods Forum (CGF) and brings together retailers and brand owners (manufacturers) from across the CGF membership. The GFSI operates under multi-stakeholder governance, with the objective to create "an extended food safety community to oversee food safety standards for businesses and help provide access to safe food for people everywhere". GFSI's work in benchmarking and harmonization aims to foster mutual acceptance of GFSI-recognized certification programs across the industry, with the ambition to enable a "once certified, accepted everywhere" approach.

<span class="mw-page-title-main">Shelf-ready packaging</span> Form of product packaging

Shelf-ready packaging (SRP) and retail-ready packaging (RRP) refers to the packaging of a product so that it is delivered to a retailer in packaging which is optimized for efficient stocking and sale.

<span class="mw-page-title-main">Retail Solutions Inc.</span>

Retail Solutions Inc (RSi) is a software company based in Mountain View, California, that provides software-as-a-service products for data management, reporting and business intelligence, and point of sale applications. RSi was named by Forbes as the biggest SaaS company you've never heard of. The company started out selling radio-frequency identification software before moving into its current business. In October 2020, RSi was acquired by IRI Worldwide.

References

  1. ↑ NetSuite.com (2023-07-06). "What Is an End-to-End Supply Chain?". Oracle NetSuite. Retrieved 2023-09-22.
  2. 1 2 Seifert, Dick (2003). Collaborative Planning, Forecasting, and Replenishment: How to Create a Supply Chain Advantage. AMACOM: A division of American Management Association. ISBN   978-0814471821 . Retrieved 2012-12-12.
  3. ↑ GS1 US and Voluntary Interindustry Commerce Solutions Association to Merge Archived 2016-08-17 at the Wayback Machine , September 10, 2012
  4. ↑ John W. Verity (21 October 1996). "CLEARING THE COBWEBS FROM THE STOCKROOM". Business Week. Archived from the original on 18 October 2012.
  5. 1 2 CPFR Committee. "Collaborative Planning, Forecasting & Replenishment (CPFRŽ) Committee". Archived from the original on 12 August 2006.
  6. ↑ "Collaborative Planning, Forecasting and Replenishment (CPFR®): CPFR An Overview". Voluntary Interindustry Commerce Standards (VICS) Association. 18 May 2004. Archived from the original on 22 June 2020. Retrieved 20 July 2018.
  7. ↑ "CPFR Technical Specification" (PDF). Archived from the original (PDF) on 11 October 2010. Retrieved 21 September 2010.
  8. ↑ "CPFR — COLLABORATIVE PLANNING, FORECASTING, AND REPLENISHMENT: Delivering Results for Manufacturers Serving the Retail Sector" (PDF). J.D. Edwards. February 2003. Archived from the original (PDF) on 8 May 2006. Retrieved 20 July 2018.
  9. ↑ Islam, Samiul; Amin, Saman Hassanzadeh; Wardley, Leslie J. (2021). "Machine learning and optimization models for supplier selection and order allocation planning". International Journal of Production Economics. 242: 108315. doi:10.1016/j.ijpe.2021.108315. S2CID   244191055.
Notes
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.