Commonwealth Steel Company

Last updated

The Commonwealth Steel Company was an American steel company based in Granite City, Illinois, founded in 1901 "by some of the young men who had helped establish the American Steel Foundry". [1] The company produced steel castings and railroad supplies at its 10-acre (4-hectare) plant, employing about 1,500 people. [1]

Contents

Commonwealth Steel Company's plant in Granite City, Illinois, in 1904 Commonwealth Steel Company plant in 1904.jpg
Commonwealth Steel Company's plant in Granite City, Illinois, in 1904

Over the years, its innovative steel castings products made Commonwealth an increasingly important manufacturer and supplier to the rail industry. By 1928, "practically all locomotives and passenger cars built in the United States" were using Commonwealth products. [2] The significance of the company to the rail industry became evident when two locomotive manufacturers, and customers of Commonwealth, the Baldwin Locomotive Company and the American Locomotive Company, formed General Steel Castings Corporation in 1928 and incorporated Commonwealth and its products as the Commonwealth Steel Division.

Early history

Clarence H. Howard, who controlled the Double Body Bolster Company, received orders for cast-steel bolsters for railroad passenger cars to be used in an exhibit at the upcoming 1904 St. Louis World's Fair but his company was unable to produce bolsters of the specified size. Cast steel bolsters of that size had not been previously manufactured. [3] Howard negotiated with the Commonwealth Steel Company to produce the new steel bolsters and he assisted during the production process. Along with his former schoolmates, H. M. Pflager and G. K. Hoblitzelle, Howard assumed control of Commonwealth in 1904. [1] He headed the company for 23 years, retiring in April 1931, two years after Commonwealth merged with General Steel Castings Corporation, and only months before his death in December 1931. [4]

Company promotion of citizenship

The company was supportive of Americanization (helping foreigners adapt to the American way of life) efforts among the large immigrant population at Lincoln Place, [5] providing free English-language classes to non-English speakers, [6] and was strongly in favor of Prohibition. [7] An article in the December 1915 issue of The Commonwealther was titled: "A saloon is sometimes called a bar - and so it is!" [8] The company also encouraged fellowship and the Golden Rule through the Fellowship Club.

The company established the Commonwealth School in 1906 to serve the educational needs of "Commonwealthers". [9] Apprentices would be given up to four hours a week, on company time, to study mathematics, mechanical drawing and blue print reading. [9]

The company's educational offering expanded with the addition of a high school program in December 1923. Conducted in cooperation with the local high school, Community High School, and authorities of Granite City, Illinois and State educational authorities, the graduates of Commonwealth School's high school program received diplomas along with the regular graduates of Community High School. [9] By the end of 1927, the Commonwealth School was offering the following programs with almost 200 employees enrolled: Apprentice School, Night School Drawing, Eighth Grade School, High School, University Extension Courses, Special Engineering Class, Trade Knowledge Courses, Scholarships, and School Dinners. [10]

Employees shared in the company's profits. Meetings of the company's profit-sharing plan, known as the Commonwealth Plan, would start with the reciting of the Lord's Prayer and, in at least one meeting, the singing of "America". [11] The Platform of the "Commonwealth Plan", read in part: "Fellowship is the Golden Rule in action, the motive power of human engineering, the life-blood of service, insuring equal opportunity for all. The Commonwealth Plan recognizes all problems as mutual, wherein and whereby absolute confidence exists in the honesty of purpose and truth of character of each other; thus blending brotherly love in all activities and enabling each to develop his several talents." [12]

Innovation and growth

Delta trailing truck casting by Commonwealth Steel Company on a preserved 1929 Victorian Railways X class locomotive, Australia Delta trailing truck Commonwealth Steel Co.jpg
Delta trailing truck casting by Commonwealth Steel Company on a preserved 1929 Victorian Railways X class locomotive, Australia

Commonwealth set the standard for innovation. In 1908, the company cast the first one-piece rectangular tender frame and, after developing special machining equipment, overcame problems of producing castings of up to 80 feet (24.38 m) long. [13] During World War I, the company produced cast steel frames for gun tractors and locomotive castings. The growth of the company meant that, by 1913, its payroll exceeded $110,000 ($3.25 million in 2022 dollars) [14] for each pay period. [15]

The company's success in supplying large castings and other parts to the rail industry necessitated more capacity. Originally covering 16 acres (6 hectares), the plant grew to 47 acres (19 hectares) in 1915 [16] to about 77 acres (31 hectares), with almost 18 acres (7 hectares) under roof, by 1924. [17]

In 1924, the company finished the design and manufactured a one-piece underframe structure, or bed, for a steam locomotive, and delivered it to the New York Central Railroad. [13] Also in 1924, the company embarked on a $1,500,000 ($25.7 million in 2022 dollars) [14] expansion that included increasing the size of the foundry to a total length of 1,475 feet (450 m), making it "probably the largest open hearth steel foundry building in the world". That increased plant capacity by 35% and allowed it to produce the "largest steel castings in the world". [18]

With the completion of the new General Office Building on the site of its plant at 1417 State Street in Granite City, Illinois, the company's headquarters was relocated from the Pierce Building in St. Louis, Missouri to Granite City beginning on February 23, 1926. [19] [20] By 1927, the facility expanded to 350 acres (142 hectares) with the plant itself covering approximately 30 acres (12 hectares). The foundry alone was over a third of a mile long, 1,875 feet or 572 meters. [21]

In 1926, the company produced a "one-piece locomotive bed with cylinders, steam chests, and saddle cast integral" and delivered it to the Terminal Railroad Association of St. Louis [3] and, during this same period, cast steel underframes and trucks were developed for electric locomotives. [13] By 1928, "practically all locomotives and passenger cars built in the United States" were made using products manufactured at the Commonwealth plant. [2]

Merger

An April 12, 1929 St. Louis Post-Dispatch newspaper article, reprinted in the April 1929 issue of The Commonwealther, noted "[t]he Commonwealth, largely because of its one-piece castings, does business with railroads all over the world. It is commonly thought not to have a competitor in the production of a one-piece frame for locomotives and coaches, a feat of casting that has at once made its business unique and added immensely to the safety of railroad travel." [22]

The importance of Commonwealth Steel to the railroad industry was not ignored by the industry and was underscored when two major locomotive companies, the American Locomotive Company and the Baldwin Locomotive Company, along with American Steel Foundries, formed General Steel Castings Corporation in 1928. The April 1929 issue of The Commonwealther printed a statement from the president of the company, Clarence Howard, that Commonwealth Steel was "working out a plan of unification" with General Steel Castings Corporation. [12]

With a capitalization of $10 million, Commonwealth Steel was acquired by General Steel Castings Corporation for a reported $35 million. [4] The merger became effective "definitely on July 30, 1929", and the Commonwealth Steel Company became the "Commonwealth Division" of General Steel Castings Corporation. [23] General Steel's "Eddystone Division" consisted of a new foundry, still under construction in 1929, on the banks of the Delaware River in Eddystone, Pennsylvania, near Baldwin Locomotive's facilities.

Related Research Articles

<span class="mw-page-title-main">Vickers</span> British engineering company

Vickers was a British engineering company that existed from 1828 until 1999. It was formed in Sheffield as a steel foundry by Edward Vickers and his father-in-law, and soon became famous for casting church bells. The company went public in 1867, acquired more businesses, and began branching out into military hardware and shipbuilding.

<span class="mw-page-title-main">Granite City, Illinois</span> City in Illinois, United States

Granite City is a city in Madison County, Illinois, United States, within the Greater St. Louis metropolitan area. The population was 27,549 at the 2020 census, making it the third-largest city in the Metro East and Southern Illinois regions, behind Belleville and O'Fallon. Officially founded in 1896, Granite City was named by the Niedringhaus brothers, William and Frederick, who established it as a steel making company town for the manufacture of graniteware kitchen utensils.

<span class="mw-page-title-main">Atchison, Kansas</span> City and County seat in Kansas, United States

Atchison is a city and county seat of Atchison County, Kansas, United States, along the Missouri River. As of the 2020 census, the population of the city was 10,885. The city is named in honor of US Senator David Rice Atchison from Missouri and was the original eastern terminus of the Atchison, Topeka and Santa Fe Railway. Atchison is also the home of Benedictine College.

<span class="mw-page-title-main">Baldwin Locomotive Works</span> American manufacturer of railroad locomotives from 1825 to 1956

<span class="mw-page-title-main">Vulcan Iron Works</span> Name of several iron foundries

Vulcan Iron Works was the name of several iron foundries in both England and the United States during the Industrial Revolution and, in one case, lasting until the mid-20th century. Vulcan, the Roman god of fire and smithery, was a popular namesake for these foundries.

<span class="mw-page-title-main">American Car and Foundry Company</span> Manufacturer of railroad rolling stock

The Pennsylvania Railroad's class K5 was an experimental 4-6-2 "Pacific" type, built in 1929 to see if a larger Pacific than the standard K4s was worthwhile. Two prototypes were built, #5698 at the PRR's own Altoona Works, and #5699 by the Baldwin Locomotive Works. Although classified identically, the two locomotives differed in many aspects, as detailed below. They were both fitted with a much fatter boiler than the K4s, but dimensionally similar to those of the I1s 2-10-0 "Decapods". Most other dimensions were enlarged over the K4s as well; the exceptions being the 70 square feet (6.5 m2) grate area and the 80 in (2.032 m) drivers.

Early Electro-Motive Corporation switcher locomotives were built with Winton 201-A engines. A total of 175 were built between February 1935 and January 1939. Two main series of locomotives were built, distinguished by engine size and output: the straight-8, 600 hp (450 kW) 'S' series, and the V12, 900 hp (670 kW) 'N' series. Both were offered with either one-piece cast underframes from General Steel Castings of Granite City, Illinois, denoted by 'C' after the power identifier, and fabricated, welded underframes built by EMC themselves, denoted by 'W'. This gave four model series: SC, SW, NC and NW. Further developments of the 900 hp (670 kW) models gave model numbers NC1, NC2, NW1, and NW1A, all of which were practically indistinguishable externally from the others, as well as a pair of unique NW4 models for the Missouri Pacific Railroad and a solitary, twin-engined T transfer locomotive model built for the Illinois Central Railroad.

<span class="mw-page-title-main">Chittaranjan Locomotive Works</span> Rolling stock manufacturing unit in India

Chittaranjan Locomotive Works (CLW) is an electric locomotive manufacturer based in India. The works are located at Chittaranjan in the Asansol Sadar subdivision of West Bengal, with an ancillary unit in Dankuni. The main unit is 32 km from Asansol and 237 km from Kolkata. CLW has stores and offices in Kolkata, as well as inspection cells in New Delhi, Mumbai, Kolkata, and Bangalore. It is the largest locomotive manufacturer unit in the world, producing 431 locomotives in 2019–20.

<span class="mw-page-title-main">General Steel Industries</span> Rolling stock manufacturer

General Steel Industries, Inc. (GSI) was an American steel company founded as General Steel Castings Corporation in 1928. The company's first headquarters were in Eddystone, Pennsylvania and, prior to completing its own modern steel foundry in 1930, acquired the operations of the Commonwealth Steel Company, a critical supplier to the rail industry.

<span class="mw-page-title-main">Hadfields Limited</span>

Hadfields Limited of Hecla and East Hecla Sheffield, Yorkshire was a British manufacturer of special steels in particular manganese alloys and the manufacture of steel castings.

<span class="mw-page-title-main">Joliet Iron and Steel Works</span> United States historic place

The Joliet Iron and Steel Works was once the second largest steel mill in the United States. Joliet Iron Works was initially run from 1869 to 1936. Joliet Steel Works eventually became unprofitable, and all operations were ceased by the early 1980s.

<span class="mw-page-title-main">Altoona Works</span>

Altoona Works is a large railroad industrial complex in Altoona, Pennsylvania. It was built between 1850 and 1925 by the Pennsylvania Railroad (PRR), to supply the railroad with locomotives, railroad cars and related equipment. For many years, it was the largest railroad shop complex in the world.

<span class="mw-page-title-main">American Foundry Society</span>

The American Foundry Society (AFS) is a professional, technical and trade association for foundries and the broader metal casting industry. The society promotes the interests of foundries to policymakers, provides training for foundry workers, and supports research and technological advancements in foundry science and manufacturing.

The Standard Steel Casting Company, commonly referred to as Thurlow Works, was a steel production and steel casting facility founded in Chester, Pennsylvania in 1883 by shipbuilder John Roach. The company was established primarily to supply steel ingots for Roach's steel mills, which included the Chester Rolling Mill and the Combination Steel and Iron Company, although it also manufactured steel castings. Standard Steel was the first company in the United States to manufacture commercial quantities of steel utilizing the acid open hearth process.

Janney couplers are a semi-automatic form of railway coupling that allow rail cars and locomotives to be securely linked together without rail workers having to get between the vehicles. They are also known as American, AAR, APT, ARA, MCB, knuckle, Buckeye, tightlock, Henricot or Centre Buffer Couplers.

<span class="mw-page-title-main">William P. Bettendorf</span> Inventor, Industrialist

William P. Bettendorf was a German-American inventor. He is credited with the invention of the power lift sulky plow, the Bettendorf metal wheel and the one-piece railroad truck frame. By the age of 53 he held 94 patents. With his younger brother, Joseph W. Bettendorf, he founded the Bettendorf Axle Company. His first wife and children preceded him in death. He died as the company was rapidly expanding and before he moved into a palatial home he was building. The city of Bettendorf, Iowa is named after the two brothers.

<span class="mw-page-title-main">Woodbury Granite Company</span> Quarry in New England

The Woodbury Granite Company (WGC) was a producer of rough and finished granite products. Incorporated in 1887, purchased and significantly reorganized in 1896, and expanded by merger in 1902 and thereafter, the company operated quarries principally in Woodbury, Vermont, but its headquarters and stone-finishing facilities were located in nearby Hardwick. Beginning as a quarrier and seller of rough stone, the company expanded into the business of finishing cut stone and grew from there. It made its name as a supplier of architectural (structural) granite, and grew to become the United States' largest producer, supplying the stone for many notable buildings, including several state capitols, numerous post offices, and many office buildings.

The Columbia Steel Company was organized in 1909 with main offices at 503 Market Street, San Francisco. When formed the company had one plant in Portland, Oregon established in 1903 and a bigger plant in Pittsburg, California established in 1909-1910. The company's namesake is the Columbia River. In 1917 the Pittsburg plant had a monthly output of 800 tons open hearth steel and employed 375.

References

  1. 1 2 3 Granite City – A pictorial history (G. Bradley Publishing, Inc., 1995). p. 49.
  2. 1 2 Granite City Jubilee Committee (1971). 75th Year Celebration of the City of Granite City, Illinois. Granite City, Illinois: Tri-City Printing Company. p. 85.
  3. 1 2 Flagg, James S.; Madison County Sesquicentennial Committee (1962). Our 150 Years, 1812 - 1962: In Commemoration of the Madison County Sesquicentennial. Edwardsville, Illinois: East 10 Publishing Company, Inc. p. 53.
  4. 1 2 "Steel magnate is taken by death". The Spartanburg Herald. December 7, 1931.
  5. ↑ The Commonwealther, July–August 1921 (Commonwealth Steel Company, 1921), p. 5
  6. ↑ The Commonwealther, January–February 1917 (Commonwealth Steel Company, 1917), p. 11
  7. ↑ The Commonwealther, May–June 1926 (Commonwealth Steel Company, 1926), p. 7
  8. ↑ The Commonwealther, December 1915 (Commonwealth Steel Company, 1915), p. 7
  9. 1 2 3 The Commonwealther, April 1927 (Commonwealth Steel Company, 1927), p. 3
  10. ↑ The Commonwealther, Christmas 1927 (Commonwealth Steel Company, 1927), p. 22
  11. ↑ The Commonwealther, July–August 1926 (Commonwealth Steel Company, 1926), p. 6
  12. 1 2 The Commonwealther, April 1929 (Commonwealth Steel Company, 1929), p. 8
  13. 1 2 3 Granite City Jubilee Committee (1971). 75th Year Celebration of the City of Granite City, Illinois. Granite City, Illinois: Tri-City Printing Company. p. 84.
  14. 1 2 "Cost-of-Living Calculator". American Institute for Economic Research. Retrieved September 3, 2023.
  15. ↑ "The Iron and Metal Markets", The Iron Age, New York: David Williams Company, vol. 92, no. 20, p. 1131, November 13, 1913
  16. ↑ The Commonwealther, April 1915 (Commonwealth Steel Company, 1915), cover page
  17. ↑ The Commonwealther, May 1924 (Commonwealth Steel Company, 1924), p. 15
  18. ↑ "Progress Magazine supplement to the Granite City Press–Record ". Granite City progress edition (supplement to the Granite City Press-Record). Granite City: Granite City Press–Record. March 14, 1924. p. 9. Retrieved 3 September 2023.
  19. ↑ The Commonwealther, February 1926 (Commonwealth Steel Company, 1926), p. 11
  20. ↑ The Commonwealther, October–November 1924 (Commonwealth Steel Company, 1924), cover page
  21. ↑ The Commonwealther, June 1927 (Commonwealth Steel Company, 1927), p. 15
  22. ↑ The Commonwealther, April 1929 (Commonwealth Steel Company, 1929), p. 9
  23. ↑ The Commonwealther, August 1929 (Commonwealth Steel Company, 1929), p. 3
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.