Concrete number

Last updated

A concrete number or numerus numeratus is a number associated with the things being counted, in contrast to an abstract number or numerus numerans which is a number as a single entity. For example, "five apples" and "half of a pie" are concrete numbers, while "five" and "one half" are abstract numbers. In mathematics the term "number" is usually taken to mean an abstract number. A denominate number is a type of concrete number with a unit of measure attached with it. For example, "5 inches" is a denominate number because it has the unit inches after it.

Contents

History

Mathematicians in ancient Greece were primarily interested in abstract numbers, while writers of instructional books for practical use were not concerned with such distinctions, so the terminology distinguishing the two types of number was slow to appear. In the 16th century textbooks began to make the distinction. This has appeared with increasing frequency until modern times. [1]

Denominate numbers

Denominate numbers are further classified as either simple, meaning a single unit is given, or compound, meaning multiple units are given. For example, 6 kg is a simple denominate number, while 324 yards 1 foot 8 inches is a compound denominate number. The process of converting a denominate number to an equivalent form that uses a different unit is called reduction. More specifically, reduction to a lower or higher unit of measurement is called reduction to lower or higher denominations. Reduction to a lower denomination is accomplished by multiplying by the number of lower units contained in each higher unit. In the case of a compound denominant number, the products are then added together. For example, 1 hour 23 minutes 20 seconds is 1 h × 3600 s/h + 23 min × 60 s/min + 20 s = 5000 seconds. Similarly, a division is used to reduce to a higher denomination, and remainders can be applied to the next highest unit to form compound denominant numbers. Addition and subtraction of compound numbers can be performed by grouping the amounts associated with each unit and performing the necessary carry and borrow operations. Multiplication and division by a pure number are again similar.

See also

Related Research Articles

<span class="mw-page-title-main">Minute and second of arc</span> Units for measuring angles

A minute of arc, arcminute (arcmin), arc minute, or minute arc, denoted by the symbol , is a unit of angular measurement equal to 1/60 of one degree. Since one degree is 1/360 of a turn, or complete rotation, one arcminute is 1/21600 of a turn. The nautical mile (nmi) was originally defined as the arc length of a minute of latitude on a spherical Earth, so the actual Earth circumference is very near 21600 nmi. A minute of arc is π/10800 of a radian.

In engineering and science, dimensional analysis is the analysis of the relationships between different physical quantities by identifying their base quantities and units of measurement and tracking these dimensions as calculations or comparisons are performed. The term dimensional analysis is also used to refer to conversion of units from one dimensional unit to another, which can be used to evaluate scientific formulae.

<span class="mw-page-title-main">Measurement</span> Process of assigning numbers to objects or events

Measurement is the quantification of attributes of an object or event, which can be used to compare with other objects or events. In other words, measurement is a process of determining how large or small a physical quantity is as compared to a basic reference quantity of the same kind. The scope and application of measurement are dependent on the context and discipline. In natural sciences and engineering, measurements do not apply to nominal properties of objects or events, which is consistent with the guidelines of the International vocabulary of metrology published by the International Bureau of Weights and Measures. However, in other fields such as statistics as well as the social and behavioural sciences, measurements can have multiple levels, which would include nominal, ordinal, interval and ratio scales.

<span class="mw-page-title-main">Multiplication</span> Arithmetical operation

Multiplication is one of the four elementary mathematical operations of arithmetic, with the other ones being addition, subtraction, and division. The result of a multiplication operation is called a product.

1 is a number representing a single or the only entity. 1 is also a numerical digit and represents a single unit of counting or measurement. For example, a line segment of unit length is a line segment of length 1. In conventions of sign where zero is considered neither positive nor negative, 1 is the first and smallest positive integer. It is also sometimes considered the first of the infinite sequence of natural numbers, followed by 2, although by other definitions 1 is the second natural number, following 0.

<span class="mw-page-title-main">Reductionism</span> Philosophical view explaining systems in terms of smaller parts

Reductionism is any of several related philosophical ideas regarding the associations between phenomena which can be described in terms of other simpler or more fundamental phenomena. It is also described as an intellectual and philosophical position that interprets a complex system as the sum of its parts.

<span class="mw-page-title-main">Subtraction</span> One of the four basic arithmetic operations

Subtraction is one of the four arithmetic operations along with addition, multiplication and division. Subtraction is an operation that represents removal of objects from a collection. For example, in the adjacent picture, there are 5 − 2 peaches—meaning 5 peaches with 2 taken away, resulting in a total of 3 peaches. Therefore, the difference of 5 and 2 is 3; that is, 5 − 2 = 3. While primarily associated with natural numbers in arithmetic, subtraction can also represent removing or decreasing physical and abstract quantities using different kinds of objects including negative numbers, fractions, irrational numbers, vectors, decimals, functions, and matrices.

<span class="mw-page-title-main">Ratio</span> Relationship between two numbers of the same kind

In mathematics, a ratio shows how many times one number contains another. For example, if there are eight oranges and six lemons in a bowl of fruit, then the ratio of oranges to lemons is eight to six. Similarly, the ratio of lemons to oranges is 6:8 and the ratio of oranges to the total amount of fruit is 8:14.

Sexagesimal, also known as base 60, is a numeral system with sixty as its base. It originated with the ancient Sumerians in the 3rd millennium BC, was passed down to the ancient Babylonians, and is still used—in a modified form—for measuring time, angles, and geographic coordinates.

In metaphysics, the distinction between abstract and concrete refers to a divide between two types of entities. Many philosophers hold that this difference has fundamental metaphysical significance. Examples of concrete objects include plants, human beings and planets while things like numbers, sets and propositions are abstract objects. There is no general consensus as to what the characteristic marks of concreteness and abstractness are. Popular suggestions include defining the distinction in terms of the difference between (1) existence inside or outside space-time, (2) having causes and effects or not, (3) having contingent or necessary existence, (4) being particular or universal and (5) belonging to either the physical or the mental realm or to neither. Despite this diversity of views, there is broad agreement concerning most objects as to whether they are abstract or concrete. So under most interpretations, all these views would agree that, for example, plants are concrete objects while numbers are abstract objects.

Quantity or amount is a property that can exist as a multitude or magnitude, which illustrate discontinuity and continuity. Quantities can be compared in terms of "more", "less", or "equal", or by assigning a numerical value multiple of a unit of measurement. Mass, time, distance, heat, and angle are among the familiar examples of quantitative properties.

The prime symbol , double prime symbol , triple prime symbol , and quadruple prime symbol are used to designate units and for other purposes in mathematics, science, linguistics and music.

Level of measurement or scale of measure is a classification that describes the nature of information within the values assigned to variables. Psychologist Stanley Smith Stevens developed the best-known classification with four levels, or scales, of measurement: nominal, ordinal, interval, and ratio. This framework of distinguishing levels of measurement originated in psychology and has since had a complex history, being adopted and extended in some disciplines and by some scholars, and criticized or rejected by others. Other classifications include those by Mosteller and Tukey, and by Chrisman.

<span class="mw-page-title-main">Reductive group</span>

In mathematics, a reductive group is a type of linear algebraic group over a field. One definition is that a connected linear algebraic group G over a perfect field is reductive if it has a representation that has a finite kernel and is a direct sum of irreducible representations. Reductive groups include some of the most important groups in mathematics, such as the general linear group GL(n) of invertible matrices, the special orthogonal group SO(n), and the symplectic group Sp(2n). Simple algebraic groups and (more generally) semisimple algebraic groups are reductive.

Principles and Standards for School Mathematics (PSSM) are guidelines produced by the National Council of Teachers of Mathematics (NCTM) in 2000, setting forth recommendations for mathematics educators. They form a national vision for preschool through twelfth grade mathematics education in the US and Canada. It is the primary model for standards-based mathematics.

<span class="mw-page-title-main">Abstract labour and concrete labour</span> Distinction made by Karl Marx

Abstract labour and concrete labour refer to a distinction made by Karl Marx in his critique of political economy. It refers to the difference between human labour in general as economically valuable worktime versus human labour as a particular activity that has a specific useful effect within the (capitalist) mode of production.

A chemical nomenclature is a set of rules to generate systematic names for chemical compounds. The nomenclature used most frequently worldwide is the one created and developed by the International Union of Pure and Applied Chemistry (IUPAC).

Arosi is a Southeast Solomonic language spoken on the island of Makira. Arosi is primarily spoken by inhabitants who live to the west of the Wango River on Makira. Makira is in the easternmost part of the Solomon Islands. Makira was visited and named by Álvaro de Mendaña de Neira in 1588. Upon landing on Makira, the Spanish were the first to record Arosi, but only six words were initially recorded. Arosi is one of the lesser known languages in Melanesia.

<span class="mw-page-title-main">Gamma ray</span> Energetic electromagnetic radiation arising from radioactive decay of atomic nuclei

A gamma ray, also known as gamma radiation (symbol γ or ), is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves, typically shorter than those of X-rays. With frequencies above 30 exahertz (3×1019 Hz), it imparts the highest photon energy. Paul Villard, a French chemist and physicist, discovered gamma radiation in 1900 while studying radiation emitted by radium. In 1903, Ernest Rutherford named this radiation gamma rays based on their relatively strong penetration of matter; in 1900 he had already named two less penetrating types of decay radiation (discovered by Henri Becquerel) alpha rays and beta rays in ascending order of penetrating power.

Algebra is the study of variables and the rules for manipulating these variables in formulas. Originating in ancient Babylonian techniques of calculation, it is now a way of thinking that appears throughout almost all areas of mathematics.

References

  1. Smith, D.E. (1953). History of Mathematics. Vol. II. Dover. pp. 11–12. ISBN   0-486-20430-8. (for section)