Continuing airworthiness management organization

Last updated

Continuing airworthiness management organisation (CAMO) is a civil aviation organization authorized to schedule and control continuing airworthiness activities on aircraft and their parts [1]

The scope of the CAMO is to organise and manage all documents and publications for Maintenance Organizations Part 145 and Part M approved, like development and management of aircraft maintenance programmes fulfilled. A CAMO must also provide record keeping of maintenance performed. In other words, a CAMO is responsible to the Air Operator Certificate (AOC) holder. EASA has the power to give CAMO second privileges also but not in all cases. These second privileges allow the CAMO to conduct airworthiness review on aircraft, issue (or recommend for issue) Airworthiness Review Certificates and issue 'permit to fly' for maintenance check flights. [2]

General requirements to be met by a CAMO are facilities (offices and documentation storage), a Continuing Airworthiness Management Exposition (CAME) which must be approved by the competent authority of the country or EASA and company procedures (to comply with Part M requirements). A CAMO can also be the operator of the aircraft.

Personnel required to be employed in a CAMO are the Accountable Manager (which can be the same person for CAMO and operator), the Quality Manager (to ensure all EASA requirements are in compliance) and appropriately qualified staff for airworthiness management. These personnel must be mentioned in the CAME. In case of second privileges Airworthiness Review Staff must be employed.

Like any other aviation organisation a CAMO is audited by authorities and must fulfill all requirements. Findings in audits are categorized in levels.

Related Research Articles

The Federal Aviation Regulations (FARs) are rules prescribed by the Federal Aviation Administration (FAA) governing all aviation activities in the United States. The FARs comprise Title 14 of the Code of Federal Regulations (CFR). A wide variety of activities are regulated, such as aircraft design and maintenance, typical airline flights, pilot training activities, hot-air ballooning, lighter-than-air aircraft, man-made structure heights, obstruction lighting and marking, model rocket launches, commercial space operations, model aircraft operations, Unmanned Aircraft Systems (UAS) and kite flying. The rules are designed to promote safe aviation, protecting pilots, flight attendants, passengers and the general public from unnecessary risk.

Aeronautical Engineers Australia (AEA) is an Australian aeronautical engineering consultancy and aircraft technical service provider. It is the largest civil aircraft design organisation in the Asia Pacific region and is now headquartered in Adelaide.

A commercial pilot licence (CPL) is a type of pilot licence that permits the holder to act as a pilot of an aircraft and be paid for their work.

<span class="mw-page-title-main">European Union Aviation Safety Agency</span> European Union civil aviation authority

The European Union Aviation Safety Agency (EASA) is an agency of the European Union (EU) with responsibility for civil aviation safety. It carries out certification, regulation and standardisation and also performs investigation and monitoring. It collects and analyses safety data, drafts and advises on safety legislation and co-ordinates with similar organisations in other parts of the world.

Pilot licensing or certification refers to permits for operating aircraft. Flight crew licences are issued by the civil aviation authority of each country, which must establish that the holder has met minimum knowledge and experience before issuing licences. The licence, along with the required class or type rating, allows a pilot to fly aircraft registered in the licence issuing state.

Pilot licensing in the United Kingdom is regulated by the Civil Aviation Authority (CAA).

<span class="mw-page-title-main">Type certificate</span> Document noting the airworthiness of a certain type of aircraft

A type certificate signifies the airworthiness of a particular category of aircraft, according to its manufacturing design. Certification confirms that the aircraft of a new type intended for serial production is in compliance with applicable airworthiness requirements established by the national air law.

An Airworthiness Directive is a notification to owners and operators of certified aircraft that a known safety deficiency with a particular model of aircraft, engine, avionics or other system exists and must be corrected.

<span class="mw-page-title-main">Flight instructor</span> Person who teaches others to operate aircraft

A flight instructor is a person who teaches others to operate aircraft. Specific privileges granted to holders of a flight instructor qualification vary from country to country, but very generally, a flight instructor serves to enhance or evaluate the knowledge and skill level of an aviator in pursuit of a higher pilot's license, certificate or rating.

<span class="mw-page-title-main">Electronic flight bag</span> Flight Information management device

An electronic flight bag (EFB) is an electronic information management device that helps flight crews perform flight management tasks more easily and efficiently with less paper providing the reference material often found in the pilot's carry-on flight bag, including the flight-crew operating manual, navigational charts, etc. In addition, the EFB can host purpose-built software applications to automate other functions normally conducted by hand, such as take-off performance calculations. The EFB gets its name from the traditional pilot's flight bag, which is typically a heavy documents bag that pilots carry to the cockpit.

In aviation safety, master minimum equipment list, or MMEL, is a categorized list of on-board systems, instruments and equipment that may be inoperative for flight in a specified aircraft model. Procedures or conditions may be associated with items on the list. Any airworthiness-related equipment or system not on the list must be functional for flight.

<span class="mw-page-title-main">Airworthiness</span> Measure of an aircrafts suitability for safe flight

In aviation, airworthiness is the measure of an aircraft's suitability for safe flight. Initial airworthiness is demonstrated by a certificate of airworthiness issued by the civil aviation authority in the state in which the aircraft is registered, and continuing airworthiness is achieved by performing the required maintenance actions.

<span class="mw-page-title-main">Aircraft maintenance</span> Performance of tasks which maintain an aircrafts airworthiness

Aircraft maintenance is the performance of tasks required to ensure the continuing airworthiness of an aircraft or aircraft part, including overhaul, inspection, replacement, defect rectification, and the embodiment of modifications, compliance with airworthiness directives and repair.

<span class="mw-page-title-main">Civil Aviation Authority of Bangladesh</span>

Civil Aviation Authority of Bangladesh (CAAB) functions as the regulatory body for all aviation related activities in Bangladesh. It is the civil aviation authority operating under the Ministry of Civil Aviation & Tourism. All nine operational airports are operated by the CAAB. A member of International Civil Aviation Organization, it has signed bilateral air transport agreement with 52 states. It is headquartered in Kurmitola, Dhaka.

<span class="mw-page-title-main">Jat Tehnika</span> Serbian aerospace company

Jat Tehnika is a Serbian aerospace company providing aircraft maintenance, repair and overhaul. The company is based at Belgrade Nikola Tesla Airport and provides services for Air Serbia and other airlines across Europe.

<span class="mw-page-title-main">Air operator's certificate</span> Approval by civil aviation authorities to operate aircraft for commercial purposes

An air operator's certificate (AOC) is the approval granted by a civil aviation authority (CAA) to an aircraft operator to allow it to use aircraft for commercial purposes. This requires the operator to have personnel, assets, and system in place to ensure the safety of its employees, and the general public. The certificate will list the aircraft types, and registrations to be used, for what purpose and in what area such as specific airports or geographic region.

A civil aviation authority (CAA) is a national or supranational statutory authority that oversees the regulation of civil aviation, including the maintenance of an aircraft register.

<span class="mw-page-title-main">Directorate General of Civil Aviation (India)</span> National civil aviation authority of the Government of India

The Directorate General of Civil Aviation (DGCA) is a statutory body of the Government of India to regulate civil aviation in India. It became a statutory body under the Aircraft (Amendment) Act, 2020. The DGCA investigates aviation accidents and incidents, maintains all regulations related to aviation and is responsible for issuance of licenses pertaining to aviation like PPL's, SPL's and CPL's in India. It is headquartered along Sri Aurobindo Marg, opposite Safdarjung Airport, in New Delhi. The Government of India is planning to replace the organisation with a Civil Aviation Authority (CAA), modelled on the lines of the American Federal Aviation Administration (FAA).

An emergency Airworthiness Directive (EAD) is an airworthiness directive issued when an unsafe condition exists that requires immediate action by an aircraft owner or operator. An EAD is published by a responsible authority such as the FOCA, EASA or FAA related to airworthiness and maintenance of aircraft and aircraft parts. It contains measures which must be accomplished and the related periods to preserve their airworthiness. Technical information is addressed to operators and maintenance organisations of affected aircraft only. EADs become effective upon receipt of notification.

<span class="mw-page-title-main">Boeing 737 MAX certification</span> Certification of aircraft

The Boeing 737 MAX was initially certified in 2017 by the U.S. Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA). Global regulators grounded the plane in 2019 following fatal crashes of Lion Air Flight 610 and Ethiopian Airlines Flight 302. Both crashes were linked to the Maneuvering Characteristics Augmentation System (MCAS), a new automatic flight control feature. Investigations in both crashes determined that Boeing and the FAA favored cost-saving solutions, but ultimately produced a flawed design of the MCAS instead. The FAA's Organization Designation Authorization program, allowing manufacturers to act on its behalf, was also questioned for weakening its oversight of Boeing.

References

  1. "EASA Regulation EU 1321/2014 on Continuing Airworthiness (Part M subpart G)" . Retrieved 2020-08-08.
  2. "Introduction of One Continuing Airworthiness Management Organisation (CAMO) Policy for Airline Groups". Airlines for Europe. Retrieved 2021-01-26.