Control booth

Last updated
A modern control booth for lighting and sound in a theatre A modern control booth or technical booth for lighting and sound in a theatre.jpg
A modern control booth for lighting and sound in a theatre
A community theatre's tech booth as seen from the stage The view of a theatre control booth from the stage.jpg
A community theatre's tech booth as seen from the stage

The control booth, control room, lighting box, technical booth, tech booth, or just booth used by television, film or theatrical technicians is the area designated for the operation of technical equipment (lighting and sound), lighting controls and sound board. Often one or two followspots may be located in the booth as well. In a theater, it is generally an enclosed space with a large sliding window with a good view of the stage centered in the back of the house. It may be on the ground floor or at the balcony level. In a film or television production, it might be in a trailer or other space near the studio. [1] [2]

Contents

It is designed to allow lighting and sound operators to be able to see the performance, without being in the auditorium itself. This means that they are free to talk to their colleagues in the booth, and also the stage management team and other crew members via the communications headset. A booth that is sealed to the auditorium also allows for noisier equipment to be used, in particular computers and computer-based lighting desks, which require built-in fans in order to work properly. The downside to having a sealed booth is that it can be difficult for the sound engineer to mix without being able to hear what is happening on stage. [3] In this situation a separate table may be set up in the house for the sound engineer. [4]

In some smaller theatres and school halls, control booths can sometimes be found above or at the side of the stage. [5] This allows space at the back of the auditorium for more seating, or a larger foyer area. In older theatres, this is because before the advent of thyristor dimming and compact electronic control desks, there was a limit on the distance that lighting controls could be placed away from the dimmers.

In some theatres, the control booth is divided into a suite of rooms, allowing each of the technical elements of a production its own customized space. This is especially likely to be the case where a theatre produces performances which require live sound mixing rather than just pre-recorded effects, as a sound operator needs to be able to hear the sound in the auditorium, and so not be sealed from it as a lighting operator, followspot operator or projectionist might be. In some theatres with one or more balconies, the followspots may be given their own room above the highest balcony, with the lighting booth typically lower down at the rear of the stalls or the first balcony. [6]

In rare cases, such as low-budget theatres or ones at small or older schools, the control booth is not enclosed as its own space; rather, it is part of the seating house. This setup is almost never used because it hinders the possibility of the technician team to effectively communicate to the backstage area without disrupting the performance.

Contents

A balcony-level control booth. The stage is to the right. TechBooth.JPG
A balcony-level control booth. The stage is to the right.

The booth contains a variety of equipment used in the production of theatrical performances. Although booths vary greatly from venue to venue, most booths contain a light board, and sometimes a sound board. Most control booths have at least one intercom headset used for communication with the backstage crew during performances. The booth may have equipment racks for the lighting and audio equipment.

See also

Related Research Articles

<span class="mw-page-title-main">Stage lighting</span> Craft of lighting at performances

Stage lighting is the craft of lighting as it applies to the production of theater, dance, opera, and other performance arts. Several different types of stage lighting instruments are used in this discipline. In addition to basic lighting, modern stage lighting can also include special effects, such as lasers and fog machines. People who work on stage lighting are commonly referred to as lighting technicians or lighting designers.

<span class="mw-page-title-main">Lighting design</span> Person responsible for lighting on a stage

In theatre, a lighting designer works with the director, choreographer, set designer, costume designer, and sound designer to create the lighting, atmosphere, and time of day for the production in response to the text while keeping in mind issues of visibility, safety, and cost. The LD also works closely with the stage manager or show control programming, if show control systems are used in that production. Outside stage lighting, the job of a lighting designer can be much more diverse, and they can be found working on rock and pop tours, corporate launches, art installations, or lighting effects at sporting events.

An electrical lighting technician, or simply lighting technician, are involved with rigging stage and location sets and controlling artificial, electric lights for art and entertainment venues or in video, television, or film production.

In theatre, the running crew are members of the technical crew who supervise and operate ("run") the various technical aspects of the production during a performance. While the "technical crew" includes all persons other than performers involved with the production, such as those who build and take down the sets and place the lighting, the term "running crew" is generally limited to those who work during an actual performance.

<span class="mw-page-title-main">Spotlight (theatre lighting)</span> Theatre lighting

A spotlight is a powerful stage lighting instrument which projects a bright beam of light onto a performance space. Spotlights are controlled by a spotlight operator who tracks actors around the stage. Spotlights are most commonly used in concerts, musicals and large-scale presentations in which highlighting a specific mobile individual is critical. Spotlights are sometimes located overhead on catwalks. In some theatres, they may also be located in the control booth or purpose-built "spot booths" in addition to the catwalk.

A theatrical cue is the trigger for an action to be carried out at a specific time. It is generally associated with theatre and the film industry. They can be necessary for a lighting change or effect, a sound effect, or some sort of stage or set movement/change.

<span class="mw-page-title-main">Theater (structure)</span> Performing arts venue (building)

A theater, or playhouse, is a structure where theatrical works, performing arts, and musical concerts are presented. The theater building serves to define the performance and audience spaces. The facility usually is organized to provide support areas for performers, the technical crew and the audience members, as well as the stage where the performance takes place.

<span class="mw-page-title-main">Front of house</span> Area of a performance venue open to the public

In the performing arts, Front of House(FOH) is the part of a performance venue that is open to the public. In theatres and live music venues, it consists of the auditorium, and foyers, as opposed to the front stage and backstage areas. In a theatre, the front of house manager is responsible for welcoming guests, refreshments, and making sure the auditorium is set out properly. By contrast, Back of House(BOH) refers to any operations that are not visible to the audience, such as props management, costume design, stage set fabrication, lighting control, and other support functions.

<span class="mw-page-title-main">Light board operator</span> Theatrical worker

The light board operator or moving light programmer, is the electrician who operates and/or programs the light board. Depending on the scale and type of production, the board op may be responsible for conventional or automated lighting fixtures, as well as practicals and, in some instances, controlling video as well.

<span class="mw-page-title-main">Catwalk (theater)</span> Elevated service platform

A catwalk is an elevated service platform from which many of the technical functions of a theater, such as lighting and sound, may be manipulated.

The RiverCenter for the Performing Arts is a modern performance space in Downtown Columbus, Georgia, United States.

<span class="mw-page-title-main">Stage lighting instrument</span> Device that emits light to illuminate performers

Stage lighting instruments are used in stage lighting to illuminate theatrical productions, concerts, and other performances taking place in live performance venues. They are also used to light television studios and sound stages.

<span class="mw-page-title-main">Worklight</span> Theatrical lighting fixture

In theater, a worklight is a high-intensity light fixture which is used to illuminate the stage for the benefit of technicians. Technicians use these lights, rather than the stage lights for a number of reasons. Firstly, it takes much less technical knowledge to turn on worklights, so even people with no knowledge of electrics can turn them on. Secondly, regardless of the lights hung for the specific show, they provide fairly consistent and complete lighting. Finally, and most importantly, they are designed to be cheap and easy to re-lamp, in contrast to theatrical fixtures, which have expensive lamps and would burn through color gels if used to illuminate stage work.

A theatrical technician, also known as a theatrical tech, theatre technician, or theatre tech is a person who operates technical equipment and systems in the performing arts and entertainment industry. In contrast to performers, this broad category contains all "unseen" theatrical personnel who practice stagecraft and are responsible for the logistic and production-related aspects of a performance including designers, operators, and supervisors.

A light plot, lighting plot or just plot is a document like an architectural blueprint used specifically by theatrical lighting designers to illustrate and communicate the lighting design to the director, other designers and finally the Master Electrician and electrics crew. The light plot specifies how each lighting instrument should be hung, focused, colored, and connected. Typically the light plot is supplemented by other paperwork such as the channel hookup or instrument schedule.

The Rose Center Theater is a performing arts theater within the Westminster Rose Center located in Westminster, California. It is part of the larger Rose Center complex that includes multiple ballrooms and banquet facilities. It is the home of the Vietnamese American Philharmonic Orchestra, TNT Productions, and the Westminster Chorale. It has also served as the host to many touring Broadway productions, dance companies, opera troupes, and was the temporary home of the Academy for the Performing Arts during the renovations of Huntington Beach High School.

There are different types of theatres, but they all have three major parts in common. Theatres are divided into two main sections, the house and the stage; there is also a backstage area in many theatres. The house is the seating area for guests watching a performance and the stage is where the actual performance is given. The backstage area is usually restricted to people who are producing or in the performance.

<span class="mw-page-title-main">Rialto Theater (Tacoma, Washington)</span> United States historic place

The Rialto Theatre in Tacoma, Washington was built in 1918 to showcase movies. Its design reflects the affluence following World War I. It reflects the character of a palace and is the result of efforts by entrepreneur Henry T. Moore and Tacoma architect Roland E. Borhek. Designed to hold 1500 patrons and retail space. The two-and-a-half-story structure is in the historic downtown of Tacoma. The area has long been associated with theaters and entertainment. The theater is freestanding, with a dramatic view on an incline with a classical façade sheathed of glazed white terra cotta. Both the interior and exterior retain most of the original design of Roland E. Borhek. The theater has an auditorium, proscenium with stage, a relocated projection booth, balcony, lobby, and commercial space. It has been altered with the removal of the storefronts and marquee. On the inside, the lobby's decorative ceiling has been hidden and the concession areas expanded.

<span class="mw-page-title-main">Majestic Theatre (Dallas)</span> Performing arts theater in the City Center District of Downtown Dallas

The Majestic Theatre is a performing arts theater in the City Center District of Downtown Dallas. It is the last remnant of Theater Row, the city's historic entertainment center on Elm Street, and is a contributing property in the Harwood Street Historic District. The structure is a Dallas Landmark and is listed on the National Register of Historic Places.

The following outline is provided as an overview of and topical guide to stagecraft:

References

  1. Guyer, J. Paul. "An Introduction to Architectural Design: Theaters & Concert Halls, Part 2, Continuing Education and Development, Inc. (2014), accessed April 13, 2021
  2. "Studio Theatre", Fisher Dachs Associates, May 2004, accessed April 13, 2021
  3. Deena Kaye; James LeBrecht (2013). Sound and Music for the Theatre: The Art & Technique of Design. Taylor & Francis. pp. 121–125. ISBN   9781136081507.
  4. Ian Appleton (2012). Buildings for the Performing Arts. Taylor & Francis. pp. 185–188. ISBN   9781136424120.
  5. Marshall Long (2014). Architectural Acoustics. Elsevier Science. p. 790. ISBN   9780123982650.
  6. Roderick Ham (2014). Theatres: Planning Guidance for Design and Adaptation. Elsevier Science. p. 130. ISBN   9781483278353.