Crescent (cyclecar)

Last updated

Crescent Motors Ltd manufactured a cyclecar in Walsall and Birmingham between 1911 and 1915. [1]

The firm, based on Pleck Road, was founded by James Bailey and became a limited company in October 1911 but had been issuing advertising material from at least March. [2]

Two models were produced both powered by J.A.P air-cooled V-twin engines with friction disc transmission and belt drive. [1] The friction drive consisted of a vertical driven disc and a smaller wheel that could be moved across the face of the driven disc so the distance from the drive axis would give variable gearing. A clutch action was made by lifting the driven wheel off the drive disc. Moving the driven wheel past the centre gave a reverse gear. The smaller car with an engine rated for taxation at 5/6 hp had tandem seating with the driver sitting behind the passenger. The larger model had a 7/9 hp engine. [2]

By 1913 the tandem seating was replaced by more conventional side by side coachwork and windscreen. The engine had grown to 964 cc with a RAC horsepower rating of 8 hp. The belt drive was replaced by a shaft to the friction disc and chain to the back axle. The price was quoted as £115. [2]

When Crescent Motors moved to Britannia Works, Rolfe Street, Smethwick, Birmingham, the J.A.P engine was replaced by a water-cooled Precision or a Blumfield V-twin engine. [1] The final drive by chain was to only one of the rear wheels with the other driven by a friction plate so a differential was not needed. The only body style offered was a 2-seater open model, which sold for ₤127. [3]

The Crescent was popular with female motorists, with several registered in the West Midlands. [1]

Production ended in 1915, and only one Crescent is known to survive. [3] The number made is not known. [2]

Related Research Articles

Flat-twin engine horizontally-opposed two-cylinder piston engine

A flat-twin engine is a two-cylinder internal combustion engine with the cylinders on opposite sides of the crankshaft. The most common type of flat-twin engine is the boxer-twin engine, where both cylinders move inwards and outwards at the same time.

A continuously variable transmission (CVT), also known as a shiftless transmission, stepless transmission, pulley transmission, or, in case of motorcycles, a 'twist-and-go', is an automatic transmission that can change seamlessly through a continuous range of effective gear ratios. This contrasts with other mechanical transmissions that offer a fixed number of gear ratios. The flexibility of a CVT with suitable control may allow the input shaft to maintain a constant angular velocity even as the output speed varies.

Alldays & Onions Antiguo fabricante de automóviles, motocicletas y tractores británico

Alldays & Onions was an English automobile maker, it manufactured cars from 1898 to 1918. The cars were sold under the Alldays name. The company also built an early British built tractor, the Alldays General Purpose Tractor.

Ateliers de Construction Mecanique lAster

L'Aster, Aster, Ateliers de Construction Mecanique l'Aster, was a French manufacturer of automobiles and the leading supplier of engines to other manufacturers from the late 1890s until circa 1910/12. Although primarily known as an engine mass manufacturer the company also produced chassis for coach-works and a complete range of components.

Turicum (automobile)

Turicum was a Swiss automobile manufactured between 1904 and 1906 in Zurich, 1907 till 1912 in Uster. Turicum is the Latin name of Zurich. The first car made by Martin Fischer was a small single-seater go-kart like vehicle, 140 cm long, with pedal-operated steering and powered by a motorcycle engine. It had chain drive but a second prototype had friction drive. The friction drive consisted of a flat steel disc coupled to the engine which drove a small, leather-covered wheel running at right angles to its surface. The small wheel could be moved across the surface of the large disc, giving an infinitely variable gear ratio. They attracted little public interest. The Swiss industrialist Jakob Heusser was also involved to establish the car manufacturer.

The Scott Motorcycle Company was owned by Scott Motors (Saltaire) Limited, Shipley, West Yorkshire, England and was a well-known producer of motorcycles and light engines for industry. Founded by Alfred Angas Scott in 1908 as the Scott Engineering Company in Bradford, Yorkshire, Scott motorcycles were produced until 1978.

The Lanchester Motor Company Limited was a car manufacturer located until early 1931 at Armourer Mills, Montgomery Street, Sparkbrook, Birmingham, and afterwards at Sandy Lane, Coventry England. The marque has been unused since the last Lanchester was produced in 1955. The Lanchester Motor Company Limited is still registered as an active company and accounts are filed each year, although as of 2014 it is marked as "non-trading".

Brough Motorcycles

Brough Motorcycles were made by William E. Brough in Nottingham, England, from 1902 to 1926, after some earlier experimentation with motorised tricycles. The Brough Superior company was a separate company created by his son, George Brough.

Friction drive Mechanical power transmission by friction between components

A friction drive or friction engine is a type of transmission that utilises 2 wheels in the transmission to transfer power to the driving wheels rather than a chain and sprockets system. This kind of transmission is often used on scooters, mainly go-peds, in place of a chain. The problem with this type of drive system is they are not very efficient, since the output wheel has width, the area of contact is spread across various radii on the primary disc. Because the tangential velocity varies as radius varies, the system must overcome velocity differentials across the surface. The compromise is slippage of the leather to metal contact area which creates friction, which in turn converts much of the energy transfer of this system into heat. Heat generation also requires a cooling system to keep the transmission working effectively.

The LuLu cyclecar was produced by the Kearns Motor Car Company. The company was founded by Charles Maxwell Kearns I in Beavertown, Snyder County, Pennsylvania about 1903. Kearns was the son of a buggy maker and had a gift for invention but little more than a grade school education. He began by first mounting an engine on a buggy and progressed to more elaborate designs and heavy trucks. The LuLu automobile was manufactured only in 1914. Billed as "more than a cyclecar", it had a four-cylinder monobloc engine and three-speed gearing. It sold for $398.

Douglas (motorcycles) British motorcycle manufacturer

Douglas was a British motorcycle manufacturer from 1907–1957 based in Kingswood, Bristol, owned by the Douglas family, and especially known for its horizontally opposed twin cylinder engined bikes and as manufacturers of speedway machines. The company also built a range of cars between 1913 and 1922.

Union (automobile)

The Union automobile was based on Lambert's "horseless carriage" gasoline buggy. It had four wheels instead of his 1891 three-wheeled version. The automobile was made by the Union Automobile Company from 1902 through 1905. There were about three hundred Union automobiles made all total.

Lambert (automobile)

The Lambert automobile and Lambert truck were built by the Lambert Automobile Company as an American vehicle from 1905 through 1916. The Lambert automobile motor in the early part of manufacturing moved around on the chassis. It was on the back of the chassis, then in the center, then to the front, and back again to the rear of the automobile. The early motors were built at the Lambert factories of the Buckeye Manufacturing Company and later they were outsourced to other proprietary manufactures.

Carden (cyclecar) brand

The Carden was a British 4 wheeled cyclecar made from 1914 by Carden Engineering originally based in Farnham, Surrey but moving in 1914 to Teddington, Middlesex and in 1919 to Ascot, Berkshire.

Albaugh-Dover Co.

The Aldo was a very simple constructed, high-wheeled, two-passenger motor buggy made by the Albaugh-Dover Co. of Chicago, Illinois in 1910, and was sold until early 1911. It featured an air-cooled, opposed 2-cylinder engine with 12 HP (N.A.C.C. rating of 106,9 c.i. volume. Further, this vehicle had a planetary transmission with double chain drive, and tiller steering. Wheel base measured 76 in., the huge carriage wheels 36 × 1.5 in. It had Right hand drive.

Lincoln Motor Car Works

Lincoln Motor Car Works was an automobile company in Chicago, Illinois. It produced cars for Sears Roebuck from 1908 until 1912. Nine models were offered, priced between US$325 and $475, with the Model L advertised at $495 complete. They were sold by mail, out of the Sears catalog. Sears had a very lenient return policy: cars were sold on a ten-day trial basis.

The Gibbons was a British 4 wheeled cyclecar made from 1917 to 1929 by engineering pattern makers Gibbons and Moore of Chadwell Heath, Essex. The first car was made in 1914 but production did not start until 1917. By 1920 the car was described as the MkIII.

Austin 40 hp car model

The Austin 40 hp is a 4-cylinder motor car launched at the Olympia Motor Show in November 1907. Manufactured by Austin at Longbridge, Northfield, Birmingham, it was the first variant from Austin's initial plans for a two model range of a 15 hp —which they had dropped—and a 25 hp car.

Little Midland automobile manufacturer

The Little Midland or LM was a British 4-wheeled cyclecar made from 1910 to 1922 by the Little Midland Light Car Co Ltd in various places in Lancashire.

Rollo (cyclecar)

The Rollo Car Co. was an English maker of cyclecars based in 140 Conybere Street, Birmingham and active between 1911 and 1913.

References

  1. 1 2 3 4 Georgano, Nick (2000). The Beaulieu Encyclopedia of the Automobile. London: Stationery Office. p. 1792. ISBN   0117023191.
  2. 1 2 3 4 Worthington-Williams, Michael (April 2002). "Over the Moon". The Automobile. 20: 49–51.
  3. 1 2 Parker, Bev. "www.historywebsite.co.uk". Wolverhampton History & Heritage. Retrieved 19 March 2014.