Driggs-Schroeder

Last updated
A Hotchkiss 6-pounder rapid-fire gun on USS Oregon (BB-3), generally similar to the Driggs-Schroeder 6-pounder. Their 1-pounder and 3-pounder rapid-fire guns were also of this configuration. 6 pounder Hotchkiss gun and crew USS Oregon.jpg
A Hotchkiss 6-pounder rapid-fire gun on USS Oregon (BB-3), generally similar to the Driggs-Schroeder 6-pounder. Their 1-pounder and 3-pounder rapid-fire guns were also of this configuration.

Driggs-Schroeder was the name of several naval guns designed by US Navy officers William H. Driggs and Seaton Schroeder for the United States Navy in the late 1880s, fitted on ships built in the 1890s. Some Driggs-Schroeder weapons were also adopted by the US Army. Driggs later founded the Driggs-Seabury Ordnance Company in 1897, in partnership with his brother Louis Labadie "L. L." Driggs [1] and Samuel Seabury, a retired US Navy officer. [2]

Driggs-Schroeder weapons included 1-pounder, [3] 3-pounder (Navy Marks 2 and 3), [4] [5] and 6-pounder (Navy Marks 6 and 8) [6] [7] naval guns. [8] All were rapid-firing, i.e. they used brass cartridges with fixed projectiles. They were among numerous models of these guns equipped on US Navy ships of the 1890s. Unlike some other manufacturers, Driggs-Schroeder did not design fully automatic 1-pounder and 3-pounder guns. Most Driggs-Schroeder weapons were manufactured by the American Ordnance Company in Bridgeport, Connecticut, [9] with some manufactured by Driggs Ordnance Company. [10] [11] [12] [13]

Breech of a Driggs-Schroeder 6-pounder gun on USS Olympia. Olympia C-6 13.JPG
Breech of a Driggs-Schroeder 6-pounder gun on USS Olympia.
Driggs-Schroeder 6-pounder gun being tested. American engineer and railroad journal (1893) (14572653078).jpg
Driggs-Schroeder 6-pounder gun being tested.
Driggs-Schroeder 6-pounder gun preserved in Easton, Pennsylvania. Easton, Pennsylvania (6616803639).jpg
Driggs-Schroeder 6-pounder gun preserved in Easton, Pennsylvania.

Some of the ships equipped with Driggs-Schroeder guns included USS Texas (1892), USS Maine (ACR-1), USS Olympia (C-6), USS New York (ACR-2), and USS Brooklyn (ACR-3). Olympia is preserved with her Driggs-Schroeder 6-pounders intact at the Independence Seaport Museum in Philadelphia, Pennsylvania.

Driggs-Schroeder designed a "limited recoil" carriage for the US Army's 3.2-inch gun M1890, along with a 3.2-inch field gun based on that weapon with a different breech. [14] These were perhaps the same gun and/or carriage later prototyped by Driggs-Seabury; neither was adopted by the US Army. [15] [16] [17]

A 12-pounder gun on a limited recoil carriage for naval landing forces was submitted to the US Army Ordnance Department in fiscal year 1895; it was not adopted. [15] [18]

An Army 4-inch/40 caliber Driggs-Schroeder rapid-fire gun also existed, [19] probably the same as one of several Navy guns of this type. Only four were emplaced by the Army in coast defense mountings; two at Fort Washington, Maryland 1899–1921 and two at Fort Warren, Massachusetts 1899–1925. [20] [21] [22] Driggs-Schroeder designed 6-pounders designated Marks II and III for the Army; [6] they possibly corresponded to the Navy Marks 6 and 8. [23] Some of these weapons were deployed at coastal artillery forts for land defense. These included experimental quantities on "parapet mounts", wheeled carriages with fittings that allowed them to be secured to pintle mounts set in concrete. A dozen were deployed at Fort Ruger in Hawaii as part of the Land Defense Project of 1915, along with some in the Harbor Defenses of Manila and Subic Bays, Philippines. [24]

Related Research Articles

USS <i>Brooklyn</i> (ACR-3) United States Navy armored cruiser

USS Brooklyn (ACR-3/CA-3) was the third United States Navy armored cruiser, the only one to be named at commissioning for a city rather than a state.

USS <i>New York</i> (ACR-2) Second United States Navy armored cruiser so designated

USS New York (ACR-2/CA-2) was the second United States Navy armored cruiser so designated; the first was the ill-fated Maine, which was soon redesignated a second-class battleship. Due to the unusually protracted construction of Maine, New York was actually the first armored cruiser to enter U.S. Navy service. The fourth Navy ship to be named in honor of the state of New York, she was later renamed Saratoga and then Rochester. With six 8-inch guns, she was the most heavily armed cruiser in the US Navy when commissioned.

<span class="mw-page-title-main">3-inch gun M1918</span> Anti-Aircraft Gun

The 3-inch gun M1918 was a United States 3-inch anti-aircraft gun that entered service in 1918 and served until it was largely superseded by the 3-inch anti-aircraft gun M3 in 1930, though the M1918 remained with some National Guard units until early in World War II. The M3 was subsequently replaced by the M1 90mm AA gun early in World War II, primarily during 1942. The M3 3" gun was later adapted for the anti-tank role, serving as the main armament of the M10 tank destroyer during World War II.

<span class="mw-page-title-main">Disappearing gun</span> Artillery piece mounted so as to descend behind a parapet for loading

A disappearing gun, a gun mounted on a disappearing carriage, is an obsolete type of artillery which enabled a gun to hide from direct fire and observation. The overwhelming majority of carriage designs enabled the gun to rotate backwards and down behind a parapet, or into a pit protected by a wall, after it was fired; a small number were simply barbette mounts on a retractable platform. Either way, retraction lowered the gun from view and direct fire by the enemy while it was being reloaded. It also made reloading easier, since it lowered the breech to a level just above the loading platform, and shells could be rolled right up to the open breech for loading and ramming. Other benefits over non-disappearing types were a higher rate of repetitive fire and less fatigue for the gun crew.

<span class="mw-page-title-main">16-inch/50-caliber M1919 gun</span> Coastal Artillery

The 16 inch gun M1919 (406 mm) was a large coastal artillery piece installed to defend the United States' major seaports between 1920 and 1946. It was operated by the United States Army Coast Artillery Corps. Only a small number were produced and only seven were mounted; in 1922 and 1940 the US Navy surplussed a number of their own 16-inch/50 guns, which were mated to modified M1919 carriages and filled the need for additional weapons.

<span class="mw-page-title-main">QF 4.7-inch Mk I – IV naval gun</span> Naval gun

The QF 4.7-inch Gun Mks I, II, III, and IV were a family of British quick-firing 4.724-inch (120 mm) naval and coast defence guns of the late 1880s and 1890s that served with the navies of various countries. They were also mounted on various wheeled carriages to provide the British Army with a long range gun. They all had a barrel of 40 calibres length.

<span class="mw-page-title-main">Seacoast defense in the United States</span> Coastal forts construction and maintenance in the U.S.

Seacoast defense was a major concern for the United States from its independence until World War II. Before airplanes, many of America's enemies could only reach it from the sea, making coastal forts an economical alternative to standing armies or a large navy. After the 1940s, it was recognized that fixed fortifications were obsolete and ineffective against aircraft and missiles. However, in prior eras foreign fleets were a realistic threat, and substantial fortifications were built at key locations, especially protecting major harbors.

<span class="mw-page-title-main">QF 6-pounder Hotchkiss</span> Family of light 57mm naval guns

The Ordnance QF Hotchkiss 6 pounder gun Mk I and Mk II or QF 6 pounder 8 cwt were a family of long-lived light 57 mm naval guns introduced in 1885 to defend against new, small and fast vessels such as torpedo boats and later submarines. There were many variants produced, often under license which ranged in length from 40 to 58 calibers, but 40 caliber was the most common version.

<span class="mw-page-title-main">4-inch/50-caliber gun</span> Naval gun

The 4″/50-caliber gun was the standard low-angle, quick-firing gun for United States, first appearing on the monitor Arkansas and then used on "Flush Deck" destroyers through World War I and the 1920s. It was also the standard deck gun on S-class submarines, and was used to rearm numerous submarines built with 3-inch (76 mm) guns early in World War II. United States naval gun terminology indicates the gun fired a projectile 4 inches in diameter, and the barrel was 50 caliber. 4x50 meant that the barrel was 200 inches long, or 16 feet long.

<span class="mw-page-title-main">5-inch/51-caliber gun</span> 20th-century naval gun of the United States Navy

5"/51 caliber guns initially served as the secondary battery of United States Navy battleships built from 1907 through the 1920s, also serving on other vessels. United States naval gun terminology indicates the gun fired a projectile 5-inch (127 mm) in diameter, and the barrel was 51 calibers long.

6-pounder gun or 6-pdr, usually denotes a 57-millimetre (2.2 in) gun firing a projectile weighing approximately 6 pounds (2.7 kg).

<span class="mw-page-title-main">16-inch/50-caliber Mark 2 gun</span> US Navy shipboard and coastal defence gun

The 16"/50 caliber Mark 2 gun and the near-identical Mark 3 were guns originally designed and built for the United States Navy as the main armament for the South Dakota-class battleships and Lexington-class battlecruisers. The successors to the 16"/45 caliber gun Mark I gun, they were at the time among the heaviest guns built for use as naval artillery.

<span class="mw-page-title-main">12-inch gun M1895</span> Coastal artillery

The 12-inch coastal defense gun M1895 (305 mm) and its variants the M1888 and M1900 were large coastal artillery pieces installed to defend major American seaports between 1895 and 1945. For most of their history they were operated by the United States Army Coast Artillery Corps. Most were installed on disappearing carriages, with early installations on low-angle barbette mountings. From 1919, 19 long-range two-gun batteries were built using the M1895 on an M1917 long-range barbette carriage. Almost all of the weapons not in the Philippines were scrapped during and after World War II.

<span class="mw-page-title-main">3-inch gun M1903</span> Rapid-fire seacoast gun

The 3-inch gun M1903 and its predecessors the M1898 and M1902 were rapid fire breech-loading artillery guns with a 360-degree traverse. In some references they are called "15-pounders" due to their projectile weight. They were originally emplaced from 1899 to 1917 and served until shortly after World War II. These 3-inch guns were placed to provide fire to protect underwater mines and nets against minesweepers, and also to protect against motor torpedo boats. In some documentation they are called "mine defense guns". The 3-inch guns were mounted on pedestal mounts that bolted into a concrete emplacement that provided cover and safety for the gun's crew.

<span class="mw-page-title-main">Fort Standish (Boston, Massachusetts)</span>

Fort Standish was a coastal fort completed in 1907 and located on Lovell's Island in Massachusetts. Named after Myles Standish, the fort would serve to host up to 7 batteries until it was disarmed and deactivated in 1947. It was also named Lovell's Island Military Reservation during the early part of its existence. It was part of the Coast Defenses of Boston.

<span class="mw-page-title-main">10-inch gun M1895</span> Coastal artillery

The 10-inch Gun M1895 (254 mm) and its variants the M1888 and M1900 were large coastal artillery pieces installed to defend major American seaports between 1895 and 1945. For most of their history they were operated by the United States Army Coast Artillery Corps. Most were installed on disappearing carriages, with early installations on barbette mountings. All of the weapons not in the Philippines were scrapped during World War II. Two of the surviving weapons were relocated from the Philippines to Fort Casey in Washington state in the 1960s.

<span class="mw-page-title-main">14-inch gun M1907</span> Coastal artillery

The 14-inch Gun M1907 (356 mm) and its variants the M1907MI, M1909, and M1910 were large coastal artillery pieces installed to defend major American seaports between 1895 and 1945. They were operated by the United States Army Coast Artillery Corps. Most were installed on single gun disappearing carriages; the only installation with four guns in twin turrets was built at the unique Fort Drum in Manila Bay, Philippines. All of the weapons not in the Philippines were scrapped during World War II.

Driggs-Seabury Ordnance Company was founded in 1897 by William H. Driggs and Samuel Seabury, both US Navy officers, in partnership with William's brother Louis Labadie "L. L." Driggs, originally to produce guns for the US Army and US Navy designed by the partners. After a few reorganizations and an entry into the motor vehicle market, the company reorganized again in 1925; its ultimate fate is unclear from references.

<span class="mw-page-title-main">6-inch gun M1897</span> *coastal artillery *field gun

The 6-inch gun M1897 (152 mm) and its variants the M1900, M1903, M1905, M1908, and M1 were coastal artillery pieces installed to defend major American seaports between 1897 and 1945. For most of their history they were operated by the United States Army Coast Artillery Corps. They were installed on disappearing carriages or pedestal mountings, and during World War II many were remounted on shielded barbette carriages. Most of the weapons not in the Philippines were scrapped within a few years after World War II.

<span class="mw-page-title-main">5-inch gun M1897</span> Coastal artillery, Field gun

The 5-inch gun M1897 (127 mm) and its variant the M1900 were coastal artillery pieces installed to defend major American seaports between 1897 and 1920. For most of their history they were operated by the United States Army Coast Artillery Corps. They were installed on balanced pillar or pedestal mountings; generally the M1897 was on the balanced pillar mounting and the M1900 was on the pedestal mounting. All of these weapons were scrapped within a few years after World War I.

References

  1. Court of Appeals of the State of New York (1922). calendar no. 47. New York: The Hecla Press. p. 8.
  2. Patent assigned by William Hale Driggs in 1906 to Driggs-Seabury Ordnance Corp.
  3. American Ordnance, pp. 35–37
  4. American Ordnance, pp. 36–37
  5. Campbell, p. 147
  6. 1 2 American Ordnance, pp. 37–39
  7. Campbell, p. 147
  8. Lohrer, George L. Ordnance Supply Manual, U. S. Ordnance Dept., Washington: Government Printing Office 1904, p. 282
  9. American Ordnance, frontispiece
  10. Executive Documents of the House of Representatives, 1889–90, Washington: Government Printing Office, pp. 440-441
  11. DiGiulian, Tony US 1-pounder guns Mks 1-15
  12. DiGiulian, Tony US 3-pounder guns Mks 1-12
  13. DiGiulian, Tony US 6-pounder guns Mks 1-13
  14. American Ordnance, pp. 42, 49–52
  15. 1 2 Ordnance Corps, US Army (1896). Annual Report of the Chief of Ordnance, Field Material section. Washington: Government Printing Office. p. 53.
  16. "Blueprint for a Driggs-Schroeder 3.2-inch gun from Winchester Repeating Arms Company, at the Buffalo Bill Center of the West". Archived from the original on 2015-04-02. Retrieved 2015-03-28.
  17. Scientific American, Vol. 79, Issue 6, article on the 3.2-inch Driggs-Seabury field gun
  18. American Ordnance, pp. 39–42, 49–52
  19. American Ordnance, pp. 42–44
  20. Berhow, pp. 84–85
  21. DiGiulian, Tony US 4"/40 guns Mks 1-6
  22. Lohrer, pp. 259–262
  23. Lohrer, pp. 282–295
  24. Berhow, pp. 188–189, 217