Dunkerton Colliery Halt | |
---|---|
General information | |
Location | Dunkerton, Somerset England |
Coordinates | 51°11′35″N2°15′44″W / 51.1931°N 2.2621°W |
Grid reference | ST817437 |
Platforms | 1 |
Other information | |
Status | Disused |
History | |
Original company | Great Western Railway |
Key dates | |
9 October 1911 | Opened |
22 March 1915 | Closed temporarily |
9 July 1923 | Reopened |
21 September 1925 | Closed permanently |
Dunkerton Colliery Halt railway station served the colliery near the village of Dunkerton, Somerset, England from 1911 to 1925 on the Bristol and North Somerset Railway.
The station opened on 9 October 1911 by the Great Western Railway, around a year after the line and the main stations had opened. It was, from the outset, a basic unmanned halt, and was intended to serve the villages of Tunley and Carlingcott as well as workers at the colliery itself. The station first closed to passengers on 22 March 1915, reopened on 9 July 1923 and closed again on 21 September 1925 [1] to both passengers and goods traffic. [2]
The Rhymney Railway (RR) was a railway company in South Wales, founded to transport minerals and materials to and from collieries and ironworks in the Rhymney Valley of South Wales, and to docks in Cardiff. It opened a main line in 1858, and a limited passenger service was operated in addition.
The Somerset Coal Canal was a narrow canal in England, built around 1800. Its route began in basins at Paulton and Timsbury, ran to nearby Camerton, over two aqueducts at Dunkerton, through a tunnel at Combe Hay, then via Midford and Monkton Combe to Limpley Stoke where it joined the Kennet and Avon Canal. This link gave the Somerset coalfield access east toward London. The longest arm was 10.6 miles (17.1 km) long with 23 locks. From Midford an arm also ran via Writhlington to Radstock, with a tunnel at Wellow.
The Pontypool and Blaenavon Railway is a 3.5-mile (5.6 km) volunteer-run heritage railway in South Wales, running trains between a halt platform opposite the Whistle Inn public house southwards to the town of Blaenavon via a two-platform station at the site of former colliery furnace of the Big Pit National Coal Museum.
Midford is a village approximately 3 miles (5 km) south-south-east of Bath, Somerset, England. Although relatively small, it extends over 2 counties, is part of two unitary authorities and is part of five parishes. Although all five parishes extend very near to the village centre, most of the residents reside in the parish of Southstoke and are part of the Bath and North East Somerset unitary authority.
The Vale of Neath Railway (VoNR) was a broad gauge railway company, that built a line from Merthyr Tydfil and Aberdare to Neath, in Wales, mostly to transport the products of the Merthyr iron industries to ports on Swansea Bay.
The Bristol and North Somerset Railway was a railway line in the West of England that connected Bristol with Radstock, through Pensford and further into northern Somerset, to allow access to the Somerset Coalfield. The line ran almost due south from Bristol and was 16 miles (26 km) long.
Radstock North railway station was a station on the Somerset and Dorset Joint Railway in the county of Somerset in England.
Midford Halt railway station was open between 1911 and 1915 in Somerset, England. The halt was on the Limpley Stoke to Camerton railway that formed part of the Great Western Railway's development of the former Bristol and North Somerset Railway, and which followed the former Somerset Coal Canal. The line was only open to passenger traffic for seven years in all, from 1910 to 1915, and from 1923 to 1925; Midford Halt opened a year late and then did not reopen for the second period.
Rainford Village railway station was on the railway line from St Helens to Rainford Junction, then Ormskirk, England.
Tilmanstone Colliery Halt was a station on the East Kent Light Railway. It opened on 16 October 1916 and was renamed Elvington in 1925. It closed to passenger traffic after the last train on 30 October 1948. The station served the pit village of Elvington. Part of the platform is still in situ hidden in undergrowth.
Alveley Halt was a halt on the original Severn Valley Line, situated between the villages of Highley and Alveley, in the English county of Shropshire. The station, which was not re-opened by the heritage Severn Valley Railway, has been replaced by the adjacent Country Park Halt around one-quarter of a mile (0.4 km) up the line.
Rawlinson Bridge was the first railway station in the Borough of Chorley in Lancashire, England. The station was located in the village of Heath Charnock and was situated on the Bolton to Preston Railway. The station opened on 4 February 1841 by act of Parliament, the Bolton and Preston Railway Company had constructed a link with the Manchester line comprising nine and a half miles of railway to a station which was to be a temporary terminus as the railway continued to be built towards Chorley. Four years later on 22 December 1841 the line had reached Chorley and was superseded by more centralised stations at Chorley and Adlington.
Radford and Timsbury Halt railway station was on the Camerton branch of the Great Western Railway in Somerset, England. It was in use from 1910 until 1915, and again from 1923 until 1925.
Moss Valley branch was a two mile long single track line built by the Great Western Railway in what is now the county borough of Wrexham, Wales. It ran from a junction with the Wrexham and Minera Railway at Moss Valley Junction to Moss Halt via three intermediate stations: Gatewen Halt, Pentre Broughton Halt, and Gwersyllt Hill Halt.
Heddon-on-the-Wall railway station served the village of Heddon-on-the-Wall, Northumberland, England from 1881 to 1958.
Whitchurch Halt railway station served the village of Whitchurch, Somerset, England on the Bristol and North Somerset Railway.
Camerton (Somerset) railway station served the village of Camerton, England from 1882 to 1951 on the Bristol and North Somerset Railway. In common with the other stations on the line it had a single platform for passengers, but also had a loop line so that two trains could pass. Diverging away from the through line at the east end of the station was the access line and associated sidings belonging to Camerton colliery. There was a substantial station building on the platform - this originally had a canopy but this was removed after passenger services ceased.
Dunkerton railway station served the village of Dunkerton, Somerset, England from 1910 to 1925. It was constructed as part of the extension of the original Bristol and North Somerset Railway Camerton branch line, carried out by the Great Western Railway between 1906 and 1910. This created a new railway which ran eastwards from the former terminus at Camerton through Dunkerton, Combe Hay, Midford and Monkton Combe before connecting to the Great Western Railway main line at Limpley Stoke.
Combe Hay Halt railway station was a railway station that served the village of Combe Hay, Somerset, England from 1910 to 1925 on the Bristol and North Somerset Railway.
Broomhill railway station served the village of Broomhill in Northumberland, England, a former pit village. The station was on a short branch line of about 5 miles (8 km) which linked the town of Amble with the East Coast Main Line near to Chevington.
Preceding station | Disused railways | Following station | ||
---|---|---|---|---|
Camerton Line and station closed | Great Western Railway Bristol and North Somerset Railway | Dunkerton Line and station closed |